ok, let's do some tests. First off, enh=20 is too strong. Without it it looks flat. I'd use enh=12.
Ver=1 to 6
Difference is too minor to see. I'd rather look at how it affects interpolation and encoding; but for that, I'd need to find a way to run both in the same script.
I can see the difference at 200% zoom.
1 is good.
2 is blurry.
3 is plastic.
4 is good, slightly better than 1.
5 is good but gives a slight plastic effect.
6 is good but gives a slight blur effect.
I'd go with 1 or 4.
sn
21 is good.
2 looks cheap.
4 looks good.
7 is very slightly blurrier than 4
9 is too sharp
10 is sharper but less than 9
17 is good, I like it.
18 is even better, my favorite.
This is my favorite (you can compare with ver=4 above for sn=21
MCleanT(rn=10, ver=4, sn=18, enh=12)
