I'm a multiAVCHD newbie, admittedly, but no matter what I try, every attempt to create a BluRay menu fails. I've tried disabling the Top Menu (previously tried XMP, then Carousel type) and choosing only the title list menu, but it always fails due to the following error:
Code:
Failure to mux menu and to create playlist [00xxx.mpls]
Error muxing title-list menu page #1!
I'll post the whole log below, but my questions are:
- Is there a known solution to this problem?
- Else, can I create a menu in some external tool and import it into multiAVCHD instead? If so, how?
For the record, my system passed all MultiTests.
Here's the log:
Code:
[23:52:42] Checking for available space and drive types (FAT32/NTFS)...
[23:52:45] Destination [D:]: NTFS, 1129845.29 MiB (1103.365 GiB) free space
[23:52:45] Temp folder [D:]: NTFS, 1129845.29 MiB (1103.365 GiB) free space
[23:52:45] Log started for multiAVCHD v4.1 (build 771)
[23:52:45] Selected output mode: Blu-ray player (BD-R/BD-RE disc)
[23:52:45] Processing 2 titles...
[23:52:45] Existing D:\NewBD Work\BRP1 Out\AVCHD\ cannot be used as destination folder!
[23:52:45] Output will be written to: D:\NewBD Work\BRP1 Out\AVCHD-20160904-235245
[23:52:50] Processing (D:\SourceVids - AC3\Test\Test Vid 1.mp4)...
[23:52:50] Pre-processing...
[23:52:50] Detected frame reference count: 2 (max:4).
[23:52:50] Detected video: ID#1:V_MPEG4/ISO/AVC 1920x1080, fps=30.000, ref=2
[23:52:50] Detected audio: ID#2:A_AC3 (48000Hz 16bit 2ch 128kbps) Language: unk
[23:52:50] Added audio: A_AC3, "D:\SourceVids - AC3\Test\Test Vid 1.mp4", track=2, lang=unk, timeshift=0ms
[23:52:50] M2TS stream split set at 99999MiB...
[23:52:50] Creating clip and playlist info (tsMuxeR)...
tsMuxeR (Version 1.10.6) output:
===============================================================================
Decoding H264 stream (track 1): Profile: High@4.1 ResolutioD: 1920:1080p Frame rate: 30
H.264 stream does not contain fps field. Muxing fps=30
Decoding AC3 stream (track 2): Bitrate: 128Kbps Sample Rate: 48KHz Channels: 2
H264 bitstream changed: insert SPS/PPS units
Processed 501 video frames
Creation of Blu-ray playlist
Creation of Blu-ray stream info and seek index
Mux successful complete.
Muxing time: 0 sec
===============================================================================
===============================================================================
tsMuxeR meta:
===============================================================================
MUXOPT --no-pcr-on-video-pid --new-audio-pes --blu-ray --vbr --custom-chapters=00:00:00.000 --vbv-len=500
V_MPEG4/ISO/AVC, "D:\SourceVids - AC3\Test\Test Vid 1.mp4", insertSEI, contSPS, track=1, lang=eng, fps=30.000
A_AC3, "D:\SourceVids - AC3\Test\Test Vid 1.mp4", track=2, lang=unk, timeshift=0ms
===============================================================================
[23:52:53] Media transfer: 00000 -> 00000.m2ts
[23:52:53] Processing playlist...
[23:52:53] Title #1 added: "Test Vid 1"
[23:52:53] Verifying title...
[23:52:56] Title has: 1 audio tracks and 0 subtitle tracks
[23:52:59] Processing (D:\SourceVids - AC3\Test\Test Vid 2.mp4)...
[23:52:59] Pre-processing...
[23:52:59] Detected frame reference count: 2 (max:4).
[23:52:59] Detected video: ID#1:V_MPEG4/ISO/AVC 1920x1080, fps=29.970, ref=2
[23:52:59] Detected audio: ID#2:A_AC3 (48000Hz 16bit 2ch 128kbps) Language: unk
[23:52:59] Added audio: A_AC3, "D:\SourceVids - AC3\Test\Test Vid 2.mp4", track=2, lang=unk, timeshift=0ms
[23:52:59] M2TS stream split set at 99999MiB...
[23:52:59] Creating clip and playlist info (tsMuxeR)...
tsMuxeR (Version 1.10.6) output:
===============================================================================
Decoding H264 stream (track 1): Profile: High@4.1 ResolutioD: 1920:1080p Frame rate: 29.97
H.264 stream does not contain fps field. Muxing fps=29.97
Decoding AC3 stream (track 2): Bitrate: 128Kbps Sample Rate: 48KHz Channels: 2
H264 bitstream changed: insert SPS/PPS units
Processed 4840 video frames
Creation of Blu-ray playlist
Creation of Blu-ray stream info and seek index
Mux successful complete.
Muxing time: 4 sec
===============================================================================
===============================================================================
tsMuxeR meta:
===============================================================================
MUXOPT --no-pcr-on-video-pid --new-audio-pes --blu-ray --vbr --custom-chapters=00:00:00.000 --vbv-len=500
V_MPEG4/ISO/AVC, "D:\SourceVids - AC3\Test\Test Vid 2.mp4", insertSEI, contSPS, track=1, lang=eng, fps=29.970
A_AC3, "D:\SourceVids - AC3\Test\Test Vid 2.mp4", track=2, lang=unk, timeshift=0ms
===============================================================================
[23:53:04] Media transfer: 00000 -> 00001.m2ts
[23:53:04] Processing playlist...
[23:53:04] Title #2 added: "Test Vid 2"
[23:53:04] Verifying title...
[23:53:08] Title has: 1 audio tracks and 0 subtitle tracks
[23:53:08] Preparing authoring information...
[23:53:08] Authoring menu (NTSC).
[23:53:08] Creating title thumbnails for 2 titles (XMB)...
[23:53:11] Using 1 thumbnail/chapter links for title #1...
[23:53:11] *** Extracting 1 chapter thumbnails...
[23:53:15] Using 1 thumbnail/chapter links for title #2...
[23:53:15] *** Extracting 1 chapter thumbnails...
[23:53:19] Image processing for XMB menu completed!
[23:53:19] Preparing menu pages...
[23:53:19] Encoding Title List menu page [1/1].
[23:53:24] Failure to mux menu and to create playlist [00254.mpls]
[23:53:24] Error muxing title-list menu page #1!
[23:53:25] Setting main menu for 2 titles...
[23:53:25] Loop mode after last title.
[23:53:25] Playback will start with title #1 (Test Vid 1).
[23:53:25] Setting menu properties...
[23:53:25] Selected TV system: [NTSC]
[23:53:25] Processing clip (CPI/CLPI) files...
[23:53:25] Completed.
[23:53:25] Setting Blu-ray format...
[23:53:26] Done!
[23:53:26] Saving multiAVCHD quick-load project (mpf):
[23:53:26] D:\NewBD Work\BRP1 Out\AVCHD-20160904-235245\multiAVCHD.mpf (OK!)
Compilation summary:
Format: Blu-ray player (BD-R/BD-RE disc)
Name : multiAVCHD
===============================================================================
1. Test Vid 1 [00:00:16]
2. Test Vid 2 [00:02:41]
===============================================================================
Overall duration : 00:02:58
Output size : 413 MiB (0.403 GiB)
[23:53:26] D:\NewBD Work\BRP1 Out\AVCHD-20160904-235245 folder created (AVCHD/Blu-ray output)!
[23:53:26] Burn its CONTENTS to BD-R/RE UDF 2.50/2.60 disc!
[23:53:27] You may now remove temp folder (D:\NewBD Work\TEMP\multiTEMP-20160904\).
[23:53:27] Your compilation contains 0hrs 2min 58sec of video material.
[23:53:27] multiAVCHD finished in 41.855 seconds (00:00:41.854)!
[23:53:27] End of log.
Any help will be greatly appreciated!