Quote:
Originally Posted by Oguignant
I sending rgb signal from nv card. In the Tv menu, i have this options in color managment, Saturation, Tint and luminance, for red, green, blue, yellow, cyan and magenta.
Does it mean that TV converts the RGB signal from NV to yCbCr, and then to RGB again?
|
If the last two controls (color/tint) are still active when inputting RGB, this is very likely, but as I posted initially and as discussed with Nevairiel, it doesn't mean that RGB output isn't the better option for MadVR. It likely is (as long as it doesn't cause levels issues with other software). I only wanted to make it clear that outputting RGB to a TV/projector usually results in just as many colorspace conversions as outputting YCB, as you have one less on the PC side but one more on the TV side.
RGB out is definitely better for a PC monitor, and most likely for a TV/Projector as well. Some other factors (like levels issues with other software) might however lead you to use YCB.
If you only use MPC-BE (or HC or similar)/LAV/MadVR, stick to RGB out.