Well, I'm not trying to argue here, mostly because it's really a non-issue, but I just double-checked my facts, and I'm not incorrect. The exact rip used is still on my HDD, named "X2" by AnyDVD-HD (I did not rename the rip folder) and the .m2ts file of the output folder "DATA" is the movie in question. Log is below.
Code:
==========================
[13:18:05] BD Rebuilder v0.46.14 (beta)
[13:18:05] BEGIN - BATCH SEQUENCE
==========================
-----------------------
[13:18:05] PROCESSING BATCH FILE [1]
----------------------
[03/10/14] BD Rebuilder v0.46.14 (beta)
[13:18:06] Source: XMEN_D1_00013
- Input BD size: 27.79 GB
- Approximate total content: [01:44:20.295]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:18:06] PHASE ONE, Encoding
- [13:18:06] Processing: VID_00074 (1 of 1)
- [13:18:06] Extracting A/V streams [VID_00074]
- [13:27:14] Reencoding video [VID_00074]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 150,097 frames
- Bitrate: 26,720 Kbs
- [13:27:15] Reencoding: VID_00074, Pass 1 of 2
- [15:05:34] Reencoding: VID_00074, Pass 2 of 2
- [23:34:38] Video Encode complete
- [23:34:38] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
[23:34:38]PHASE ONE complete
[23:34:38]PHASE TWO - Rebuild Started
- [23:34:39] Rebuilding BD file Structure
[00:17:10] - Encode and Rebuild complete
- WORKFILES folder removed.
[00:17:12] JOB: XMEN_D1 finished.
-----------------------
[00:17:13] PROCESSING BATCH FILE [2]
----------------------
[03/11/14] BD Rebuilder v0.46.14 (beta)
[00:17:18] Source: DATA_00013
- Input BD size: 29.52 GB
- Approximate total content: [02:13:47.477]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[00:17:18] PHASE ONE, Encoding
- [00:17:18] Processing: VID_00074 (1 of 1)
- [00:17:18] Extracting A/V streams [VID_00074]
- [02:02:42] Reencoding video [VID_00074]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 192,467 frames
- Bitrate: 19,793 Kbs
- [02:02:43] Reencoding: VID_00074, Pass 1 of 2
- [04:03:30] Reencoding: VID_00074, Pass 2 of 2
- [13:06:36] Video Encode complete
- [13:06:36] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- Track 4358 (eng): Keeping original audio
[13:06:36]PHASE ONE complete
[13:06:36]PHASE TWO - Rebuild Started
- [13:06:37] Rebuilding BD file Structure
[13:44:44] - Encode and Rebuild complete
- WORKFILES folder removed.
[13:44:45] JOB: DATA finished.
-----------------------
[13:44:45] PROCESSING BATCH FILE [3]
----------------------
[03/11/14] BD Rebuilder v0.46.14 (beta)
[13:44:48] Source: XMEN_THELASTSTAND_00013
- Input BD size: 20.80 GB
- Approximate total content: [01:44:05.238]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:44:49] PHASE ONE, Encoding
- [13:44:49] Processing: VID_00074 (1 of 1)
- [13:44:49] Extracting A/V streams [VID_00074]
- [14:43:15] Reencoding video [VID_00074]
- [14:43:15] Keeping original video (no reencode)
- [14:43:15] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- Track 4358 (eng): Keeping original audio
[14:43:15]PHASE ONE complete
[14:43:15]PHASE TWO - Rebuild Started
- [14:43:15] Rebuilding BD file Structure
[15:12:55] - Encode and Rebuild complete
- WORKFILES folder removed.
[15:12:56] JOB: XMEN_THELASTSTAND finished.
-----------------------
[15:12:56] PROCESSING BATCH FILE [4]
----------------------
[03/11/14] BD Rebuilder v0.46.14 (beta)
[15:12:59] Source: XMEN_WOLVERINE_00010
- Input BD size: 27.87 GB
- Approximate total content: [01:47:21.393]
- Target BD size: 22.95 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[15:12:59] PHASE ONE, Encoding
- [15:12:59] Processing: VID_00074 (1 of 1)
- [15:12:59] Extracting A/V streams [VID_00074]
- [16:28:23] Reencoding video [VID_00074]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 154,439 frames
- Bitrate: 25,547 Kbs
- [16:28:23] Reencoding: VID_00074, Pass 1 of 2
- [18:11:34] Reencoding: VID_00074, Pass 2 of 2
- [03:47:02] Video Encode complete
- [03:47:02] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- Track 4353 (eng): Keeping original audio
- Track 4357 (eng): Keeping original audio
- Track 4358 (eng): Keeping original audio
[03:47:02]PHASE ONE complete
[03:47:02]PHASE TWO - Rebuild Started
- [03:47:10] Rebuilding BD file Structure
[04:21:39] - Encode and Rebuild complete
- WORKFILES folder removed.
[04:21:40] JOB: XMEN_WOLVERINE finished.
==========================
[04:21:40] END - BATCH SEQUENCE
==========================
I also just started a movie-only backup (non-batch) of the same rip (it's still running), with a BD50 target/output, and the log file already shows that it's referring to the source directory as "DATA_00013", and the .inf file contains the following line:
"LABEL=DATA"
The source path as seen in the BD-RB GUI ends in "\X2\".
See below partial log.
Code:
----------------------
[03/12/14] BD Rebuilder v0.46.14 (beta)
[13:31:24] Source: DATA_00013
- Input BD size: 29.52 GB
- Approximate total content: [02:13:47.477]
- Target BD size: 46.26 GB
- Windows Version: 5.1 [2600]
- MOVIE-ONLY mode enabled
- Quality: Highest (Very Slow), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[13:31:24] PHASE ONE, Encoding
- [13:31:24] Processing: VID_00074 (1 of 1)
- [13:31:24] Extracting A/V streams [VID_00074]
EDIT:
gonca (thank you) is correct: my hard drive disk label that the source rip sits on is called "DATA". At least now we know what's happening.