View Single Post
Old 23rd September 2009, 18:25   #5328  |  Link
TRONDROM
Registered User
 
TRONDROM's Avatar
 
Join Date: Mar 2009
Posts: 28
Need help. I just want to make sure that I'm using the correct BD-RB Setup settings for a BD-25 encode. I've done about 15 so far and ten of them have come out fine, but five will not load or play in my Sony BDP-S300. I looked at the BD-Rebuilder notes and I get this error GUI issue, no hWnd returned. I will tell you that since I've updated to the newest version I've haven't had any problem, but just want to make sure that the bottom settings I'm using are the best settings for making a BD-25 full disc copy with DTS audio and one subtitle stream only.

Here are the settings I'm using.

Do not convert DTS to AC3 is checked.
Do not reencode AC3 is checked
Keep HD Audio for BD25 output is checked
Target size is BD-25 is checked

Configuration/INI Settings
[Options]
RESIZE=0
MODE=0
TARGET_SIZE=23000
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
COLOR_BOOST=0
RESIZE_1080=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
KEEP_HD_AUDIO=1
AVCHD=0
REMOVE_WORKFILES=1
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=23450
PROCESS_SECONDARY=0
VERBOSE_STATUS=1
SD_CONVERT=0

Is there anything wrong with these settings? I just want DTS English and English subtitles only, want all extras of the Bluray but AC3 sound is fine for the extras.

Just don't understand why some come out okay and others don't.

Also I use AnyDVD HD to remove Region Codes and remove any protection.

Last edited by TRONDROM; 23rd September 2009 at 18:32.
TRONDROM is offline   Reply With Quote