Doom9's Forum - View Single Post - BD Rebuilder Beta

sieve · 15th December 2016, 03:45

I have a 4 DVD set of a Sweedish TV show. I wanted to compile all episodes onto 1 BD that will play in the U.S. The source is 576i 25fps. I tried a couple different methods and have been unsuccessful in getting the video on the output BD to display when played in a BD player. Subtitles and audio play fine. I'll note that audio and video play fine on the same TV if I play the BD through a computer.

My config settings are pasted below.

[Options]
VERSION=0.50.0.20
ENCODER=0
MODE=3
ENCODE_QUALITY=3
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=23500
AUTO_BURN=2
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AUDIO_DRC=0
DECODER=0
AVCHD=1
REMOVE_WORKFILES=0
REMOVE_OUTPUT=1
USE_FILTERS=0
BDMV_CERT_ONLY=0
IVTC_PULLDOWN=1
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=0
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
PGSTOSRT=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=22000
PRIORITY_CLASS=0
MOVIEONLY_TYPE=0
ALTCRF=23
ALT_TARGET=2000
ALT_CRF_TARGET=1024
ALTMETHOD=2
ALTAUTOCROP=0
IMPORT_PAL_TO_FILM=1
[Paths]
SOURCE_PATH=C:\WORKING\IMPORTS\BRIDGE_S3\
WORKING_PATH=C:\WORKING\

The first time I tried, I imported DVD(s) quick reauthored. The one thing I notices in the stream window as that each video chapter (episode) was MPEG-2, 576i, 25fps. I assumed that the 25fps would be a problem. I thought that IMPORT_PAL_TO_FILM=1 was supposed to convert that to 23.975fps in the import process, but apparently it didn't. I then ran a full backup to a BD-25 .iso. The burned BD w.ould not display video when played in a BD player. Video remained at 576i 25 fps.

The second time I tried, I imported DVD(s) quick reauthored. Same 576i 25fps in the stream window. I then did alternate movie-only output to MKV, Intact Video, Intact Audio. I then imported these video files. Same 576i 25 fps. I then ran full backup to a BD-25 .iso. Same problem as above.

So, my questions are:
Is it possible to do what I am attempting to do in BD rebuilder?
If so, what settings/steps am I doing incorrectly?

Thanks in advance!

15th December 2016, 03:45	#25326 \| Link
sieve Registered User Join Date: Jun 2011 Posts: 50	converting Sweedish DVD set to BD to play in U.S. I have a 4 DVD set of a Sweedish TV show. I wanted to compile all episodes onto 1 BD that will play in the U.S. The source is 576i 25fps. I tried a couple different methods and have been unsuccessful in getting the video on the output BD to display when played in a BD player. Subtitles and audio play fine. I'll note that audio and video play fine on the same TV if I play the BD through a computer. My config settings are pasted below. [Options] VERSION=0.50.0.20 ENCODER=0 MODE=3 ENCODE_QUALITY=3 ONEPASS_ENCODING=0 AUTO_QUALITY=0 TARGET_SIZE=23500 AUTO_BURN=2 AUDIO_TO_KEEP=eng; SUBS_TO_KEEP=eng; SD_CONVERT=0 OPEN_GOP=0 RESIZE_1080=0 RESIZE_1440=0 RESIZE_720=0 DEINTERLACE=1 SD_TO_1080=0 IGNORE_3D=0 CONVERT_WIDE=0 DTS_REENCODE=0 AC3_REENCODE=0 AC3_640=1 AC3_192=0 KEEP_HD_AUDIO=1 AUDIO_DRC=0 DECODER=0 AVCHD=1 REMOVE_WORKFILES=0 REMOVE_OUTPUT=1 USE_FILTERS=0 BDMV_CERT_ONLY=0 IVTC_PULLDOWN=1 ASSUME_DVD_PAL=0 FRIMSOURCE=0 COMPLETION_BEEP=0 OUTPUT_SBS=0 NEROAAC=0 SUPTITLE=0 PGSTOSRT=0 AUDIO_TRACK_LIMIT=1 SUBTITLE_TRACK_LIMIT=1 CUSTOM_TARGET_SIZE=22000 PRIORITY_CLASS=0 MOVIEONLY_TYPE=0 ALTCRF=23 ALT_TARGET=2000 ALT_CRF_TARGET=1024 ALTMETHOD=2 ALTAUTOCROP=0 IMPORT_PAL_TO_FILM=1 [Paths] SOURCE_PATH=C:\WORKING\IMPORTS\BRIDGE_S3\ WORKING_PATH=C:\WORKING\ The first time I tried, I imported DVD(s) quick reauthored. The one thing I notices in the stream window as that each video chapter (episode) was MPEG-2, 576i, 25fps. I assumed that the 25fps would be a problem. I thought that IMPORT_PAL_TO_FILM=1 was supposed to convert that to 23.975fps in the import process, but apparently it didn't. I then ran a full backup to a BD-25 .iso. The burned BD w.ould not display video when played in a BD player. Video remained at 576i 25 fps. The second time I tried, I imported DVD(s) quick reauthored. Same 576i 25fps in the stream window. I then did alternate movie-only output to MKV, Intact Video, Intact Audio. I then imported these video files. Same 576i 25 fps. I then ran full backup to a BD-25 .iso. Same problem as above. So, my questions are: Is it possible to do what I am attempting to do in BD rebuilder? If so, what settings/steps am I doing incorrectly? Thanks in advance!