View Single Post
Old 26th May 2013, 14:42   #17316  |  Link
Yannes
Registered User
 
Join Date: Feb 2010
Posts: 6
Quote:
Originally Posted by Yannes View Post
The thing is that i've used 24000MB a few dozen times before and the output size was always between 24 and 24.5m bytes. And if you read my post you'd see that I did use the BD25 mode and the result was the same as the custom 24000 size, the movie file turned out to be a GB too large for no apparent reason.

There is bug somewhere in there, there is no denying that. The same problem occurred with another blu-ray I tried to shrink down as well, which had an end result of 25.5m bytes.

But sure, i'll do it again with BD25 mode and give some more in-depth details.
Ok, so I used the BD25 mode for once to proof my point and the blu-ray turned out to be way too big. The final size after converting is 25,049,242,733 bytes (only 100MB smaller than than the custom 24000 size I used before).

The BD rebuilder log:

Code:
[05/24/13] BD Rebuilder v0.44.09 (beta)
[22:58:40] Source:  
  - Input BD size: 34.33 GB
  - Approximate total content: [02:07:52.289]
  - Target BD size: 22.95 GB
  - Windows Version: 5.1 [2600]
  - Quality: Highest (Very Slow), Two Pass
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[22:58:41] PHASE ONE, Encoding
 - [22:58:41] Processing: VID_00274 (1 of 1)
 - [22:58:42] Extracting A/V streams [VID_00274]
 - [23:18:10] Reencoding video [VID_00274]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 178,993 frames
   - Bitrate: 22,381 Kbs
 - [23:18:11] Reencoding: VID_00274, Pass 1 of 2
 - [01:11:18] Reencoding: VID_00274, Pass 2 of 2
 - [09:43:43] Video Encode complete
 - [09:43:47] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [09:43:47] Multiplexing M2TS
[10:03:58]PHASE ONE complete
[10:03:59]PHASE TWO - Rebuild Started
 - [10:03:59] Rebuilding BD file Structure
[10:04:32] - Encode and Rebuild complete
 - WORKFILES folder removed.
[10:04:37] JOB:  finished.
The config file:

Code:
[Status]
LABEL=MONSIEUR_VERDOUX
VERSION=v0.44.09 (beta)
SOURCE_SIZE=36859881741
SOURCE_VIDEO_SIZE=36016257024
TARGET_SIZE=24641536000
REDUCTION=.660754704941768
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=all
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=-1
INSTANCES=1
DGDECNV=0
QUICK=0
ENCODE_STEP=0
COMPLETED=1
REBUILD_COMPLETE=1
[00274]
AUDIO=1
PGS=1
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=23797911283
RATE=22381
SPLITS=1
NSTART=27000000
NEND=362947275
NSIZE=24205621248
FLINK=0
MLINK=0
The result:



Is it possible that certain blu-rays (in this case a criterion blu-ray) can give problems with the program? I've never had this issue before and I've done multiple backups of criterion blu-rays.
Yannes is offline   Reply With Quote