|
@ Ch3vr0n; RE: Then you should post a full processing log with any potential errors.
----------------------
[07/26/18] BD Rebuilder v0.50.25
[08:42:51] Source: RAMPAGE
- Input BD size: 36.63 GB
- Approximate total content: [02:01:00.336]
- Target BD size: 24.27 GB
- Windows Version: 6.2 [9200]
- Quality: High Quality (Default), ABR
- MVC 3D Output Mode enabled
- Decoding/Frame serving: FRIMDecode
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[08:42:53] PHASE ONE, Encoding
- [08:42:53] Blanking: VID_00003 (1 of 15)
- [08:42:53] Processing: VID_00004 (2 of 15)
- [08:42:53] Extracting A/V streams [VID_00004]
- [08:42:57] Reencoding video [VID_00004]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 321 frames
- Bitrate: 9,101 Kbs
- [08:42:57] Reencoding: VID_00004, Pass 1 of 2
- [08:43:00] Reencoding: VID_00004, Pass 2 of 2
- [08:43:07] Video Encode complete
- [08:43:07] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [08:43:07] Multiplexing M2TS
- [08:43:11] Blanking: VID_00005 (3 of 15)
- [08:43:11] Blanking: VID_00008 (4 of 15)
- [08:43:11] Blanking: VID_00009 (5 of 15)
- [08:43:11] Blanking: VID_00013 (6 of 15)
- [08:43:11] Blanking: VID_00015 (7 of 15)
- [08:43:11] Blanking: VID_00016 (8 of 15)
- [08:43:11] Blanking: VID_00017 (9 of 15)
- [08:43:11] Processing: VID_00050 (10 of 15)
- [08:43:11] Extracting A/V streams [VID_00050]
- [08:43:15] Reencoding video [VID_00050]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 121 frames
- Bitrate: 7,787 Kbs
- Using FRIMEncoder for MVC encoding
- [08:43:15] Reencoding: VID_00050, Pass 1 of 1
- [08:43:19] Video Encode complete
- [08:43:19] Processing audio tracks
- [08:43:19] Multiplexing M2TS
- [08:43:23] Scanning for 3D CLPI info...
- [08:43:23] Processing: VID_00051 (11 of 15)
- [08:43:23] Extracting A/V streams [VID_00051]
- [08:43:26] Reencoding video [VID_00051]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 121 frames
- Bitrate: 5,241 Kbs
- Using FRIMEncoder for MVC encoding
- [08:43:26] Reencoding: VID_00051, Pass 1 of 1
- [08:43:30] Video Encode complete
- [08:43:30] Processing audio tracks
- [08:43:30] Multiplexing M2TS
- [08:43:34] Scanning for 3D CLPI info...
- [08:43:34] Blanking: VID_00103 (12 of 15)
- [08:43:34] Blanking: VID_00242 (13 of 15)
- [08:43:34] Processing: VID_00252 (14 of 15)
- [08:43:34] Extracting A/V streams [VID_00252]
- [08:47:11] Reencoding video [VID_00252]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 154,312 frames
- Bitrate: 25,644 Kbs
- Using FRIMEncoder for MVC encoding
- [08:47:11] Reencoding: VID_00252, Pass 1 of 1
[08:48:16] - Failed video encode, aborted
[07/26/18] Checking System Settings
- BD-Rebuilder v0.50.25
- Windows Version: 6.2 [9200]
- Working Path Free Space: 174.38GB
- AVISYNTH Version: 2.6.0.6, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4504, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
- FRIMEncode: Ok
- FRIMDecode: Ok
[07/26/18] Systems Settings Check complete
---Also MVCENCODE.bat
"C:\BD-RBV05025\BD_Rebuilder\tools\FRIMDecode.exe" -ts -i::mvc "H:\BDMV\STREAM\00252.m2ts" "H:\BDMV\STREAM\00253.m2ts" -o \\.\pipe\bdrb.yuv -sw | "C:\BD-RBV05025\BD_Rebuilder\tools\FRIMEncode.exe" mvc -i \\.\pipe\bdrb_L.yuv -i \\.\pipe\bdrb_R.yuv -viewoutput -o "D:\WORKING\WORKFILES\VID_00252.AVS.264" -o "D:\WORKING\WORKFILES\VID_00252.AVS.mvc" -sw -w 1920 -h 1080 -f 23.976 -u 4 -cpbsize 3750 -l 6 -profile high -level 4.1 -vbr 25644 45000 -gop 24 4 0 S -maxdpb 4
|