Doom9's Forum - View Single Post - madVR - high quality video renderer (GPU assisted)

Boltron · 24th June 2012, 01:45

I have questions about the calibration settings in madVR. The specific ones are Devices > Calibration and Devices > Color & Gamma.

I have a LG LCD (LED Full Array) set which I have calibrated for both color (has yCMS adjustments) and grey scale with a colorimeter and ColorHCFR software. I am not an expert at this but I have done it a few times following a good guide and I am quite happy with the results.

I have the calibration results for red/green/blue/white and grey scale from ColorHCFR.

So my questions.

1) Devices > Calibration
Do I select "this display is already calibrated" or do I select "calibrate this display by using yCMS" and enter my results data?

2) Again in Devices > Calibration
I calibrated to BT.709 to 2.20. What do I select for the transfer function / gamma? Is it Pure Power Curve 2.20?

3) Devices > Color & Gamma
Do I enable Gamma Processing?

My setup is Win7, MC17 with madVR and LAV Filters.

Thanks.

24th June 2012, 01:45	#13352 \| Link
Boltron Registered User Join Date: May 2011 Posts: 94	Questions regarding Color and Gamma calibration I have questions about the calibration settings in madVR. The specific ones are Devices > Calibration and Devices > Color & Gamma. I have a LG LCD (LED Full Array) set which I have calibrated for both color (has yCMS adjustments) and grey scale with a colorimeter and ColorHCFR software. I am not an expert at this but I have done it a few times following a good guide and I am quite happy with the results. I have the calibration results for red/green/blue/white and grey scale from ColorHCFR. So my questions. 1) Devices > Calibration Do I select "this display is already calibrated" or do I select "calibrate this display by using yCMS" and enter my results data? 2) Again in Devices > Calibration I calibrated to BT.709 to 2.20. What do I select for the transfer function / gamma? Is it Pure Power Curve 2.20? 3) Devices > Color & Gamma Do I enable Gamma Processing? My setup is Win7, MC17 with madVR and LAV Filters. Thanks.