tsMuxer Open Source - Page 20

a5180007 · 8th February 2020, 16:28

Quote:

Originally Posted by SeeMoreDigital

Yes my OPPO can play the 'P81_GlassBlowing2.m2ts' file...

Thanks! So to finish the patch I need to include the 0xB0 DoVi descriptor in the PMT. Anybody knows how to extract the DoVi profile and level info from the hevc stream ? (and not from the container m2ts or mp4)

SeeMoreDigital · 8th February 2020, 17:38

Out of interest...

What tool is used to determine the profile version of a Dolby Vision video stream?

koka · 8th February 2020, 19:36

Thanks to @BloodyRipper, the torment with writing .srt in UTF-8 with BOM ended. Now you can write .srt in UTF-8 without BOM or even in 8-bit active code page encoding for example, in cp1251. Look https://github.com/justdan96/tsMuxer...fcf9637a998593

a5180007 · 8th February 2020, 20:21

Quote:

Originally Posted by SeeMoreDigital

What tool is used to determine the profile version of a Dolby Vision video stream?

Mediainfo reports profile and level (eg dvhe.04.06) read from m2ts or mp4 metadata. What I don't know -and I need for the PMT descriptor- is how to have these from the hevc stream.

imhh11 · 8th February 2020, 21:53

@a5180007 I hope you can make tsmuxer to remux the single layer mp4 to TS or M2TS, that would be really awesome. It would allow Atmos + DV (Even though DVDFAB's single layer remux are probably not true DV, it's still progress.)

Also, it would be nice to have the ability to go from dual-layer mp4 to UHD structure. Now we have to demux the mp4 with dlb_mp4demux and then build the UHD structure with tsmuxer.

Thank's a lot for the great work you're doing.

ryu34 · 8th February 2020, 22:12

Hey wondering if there will be support for True-HD or Atmos tracks that have had their AC-3 core separated as its own track due to MKV authoring.

SeeMoreDigital · 8th February 2020, 22:35

Quote:

Originally Posted by ryu34

Hey wondering if there will be support for True-HD or Atmos tracks that have had their AC-3 core separated as its own track due to MKV authoring.

Yes this would be handy...

From what I understand .thd+ac3 is only a mandatory requirement for Blu-ray disc authoring. The AC-3 core is not necessary when creating generic .m2ts files.

tymoxa · 8th February 2020, 22:47

Thanks to @BloodyRipper,

Quote:

Enhancement: Add option to make a specific audio the default track and a specific subtitle track a forced track #126

works as it intended to be (at least in cli).

outgoing · 8th February 2020, 23:09

Quote:

Originally Posted by tymoxa

Thanks to @BloodyRipper, works as it intended to be (at least in cli).

Is this also valid for when it is assembled in a bluray with menu?

tymoxa · 8th February 2020, 23:28

Quote:

Originally Posted by outgoing

Is this also valid for when it is assembled in a bluray with menu?

No. Only for remuxes

outgoing · 8th February 2020, 23:48

Quote:

Originally Posted by tymoxa

No. Only for remuxes

GeorgeLucas · 10th February 2020, 21:45

It would be cool if a language could be chosen as the default (Audio & Subs). Please please insert this feature...

THX

SeeMoreDigital · 10th February 2020, 22:01

Quote:

Originally Posted by GeorgeLucas

It would be cool if a language could be chosen as the default (Audio & Subs). Please please insert this feature...

THX

I'm not sure I understand what you mean!

tymoxa · 10th February 2020, 22:24

Quote:

Originally Posted by GeorgeLucas

It would be cool if a language could be chosen as the default (Audio & Subs). Please please insert this feature...

It's already there, in Blu-Ray tab. Check the latest nightly build here

GeorgeLucas · 10th February 2020, 22:56

If I drag an mpls file into the tsmuxer, the German audio tracks and subtitles are only automatically marked, for example.

SeeMoreDigital · 11th February 2020, 10:21

Quote:

Originally Posted by GeorgeLucas

If I drag an mpls file into the tsmuxer, the German audio tracks and subtitles are only automatically marked, for example.

For what Blu-ray discs? Where were they originally released?

Hart2hart · 11th February 2020, 13:49

Quote:

Originally Posted by GeorgeLucas

If I drag an mpls file into the tsmuxer, the German audio tracks and subtitles are only automatically marked, for example.

I believe George is asking for the ability to set a default language in TSMuxer. This default would be applied to the results of a playlist being added by TSMuxer preselecting tracks in that language and leaving others as not selected.

staina · 11th February 2020, 16:50

Great work with addition setting for default audio and subtitles track. Still would it would in the same parts behind command Play PL_MK 0, GPR10 (HEX: 42 82 00 00 00 00 00 00 00 00 00 0A) change command Jump Title 1 (HEX: 21 81 00 00 00 00 00 01 00 00 00 00) to command Break (HEX: 00 02 00 00 00 00 00 00 00 00 00 00). Command Jump Title 1 playback bluray disk over and over in loop order ending playback at the end movie.

Latest nightly build tsMuxer GUI no saves position and size windows and lay-out in window see pictures.

Thanks fixed and answer, staina

Hart2hart · 11th February 2020, 21:16

On Blu-ray tab, what does “Start mux time”represent?

Thank you

justdan96 · 13th February 2020, 13:49

@staina sorry I'm not quite sure what you are saying, is it a UI issue?

8th February 2020, 17:38	#382 \| Link
SeeMoreDigital Life's clearer in 4K UHD Join Date: Jun 2003 Location: Notts, UK Posts: 12,227	Out of interest... What tool is used to determine the profile version of a Dolby Vision video stream? __________________ \| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 \| My Network Layout & A/V Gear \|

8th February 2020, 19:36	#383 \| Link
koka Registered User Join Date: Jun 2018 Posts: 14	Thanks to @BloodyRipper, the torment with writing .srt in UTF-8 with BOM ended. Now you can write .srt in UTF-8 without BOM or even in 8-bit active code page encoding for example, in cp1251. Look https://github.com/justdan96/tsMuxer...fcf9637a998593 Last edited by koka; 8th February 2020 at 20:22.

8th February 2020, 21:53	#385 \| Link
imhh11 Registered User Join Date: Jul 2016 Posts: 171	@a5180007 I hope you can make tsmuxer to remux the single layer mp4 to TS or M2TS, that would be really awesome. It would allow Atmos + DV (Even though DVDFAB's single layer remux are probably not true DV, it's still progress.) Also, it would be nice to have the ability to go from dual-layer mp4 to UHD structure. Now we have to demux the mp4 with dlb_mp4demux and then build the UHD structure with tsmuxer. Thank's a lot for the great work you're doing. Last edited by imhh11; 8th February 2020 at 21:58.

8th February 2020, 22:12	#386 \| Link
ryu34 Registered User Join Date: Aug 2019 Posts: 5	True-HD + Atmos tracks in MKV Hey wondering if there will be support for True-HD or Atmos tracks that have had their AC-3 core separated as its own track due to MKV authoring.

11th February 2020, 16:50	#398 \| Link
staina Registered User Join Date: Feb 2013 Posts: 67	Great work with addition setting for default audio and subtitles track. Still would it would in the same parts behind command Play PL_MK 0, GPR10 (HEX: 42 82 00 00 00 00 00 00 00 00 00 0A) change command Jump Title 1 (HEX: 21 81 00 00 00 00 00 01 00 00 00 00) to command Break (HEX: 00 02 00 00 00 00 00 00 00 00 00 00). Command Jump Title 1 playback bluray disk over and over in loop order ending playback at the end movie. Latest nightly build tsMuxer GUI no saves position and size windows and lay-out in window see pictures. Thanks fixed and answer, staina Attached Images

10th February 2020, 21:45	#392 \| Link
GeorgeLucas Registered User Join Date: Dec 2013 Posts: 3	It would be cool if a language could be chosen as the default (Audio & Subs). Please please insert this feature... THX

10th February 2020, 22:56	#395 \| Link
GeorgeLucas Registered User Join Date: Dec 2013 Posts: 3	If I drag an mpls file into the tsmuxer, the German audio tracks and subtitles are only automatically marked, for example.

11th February 2020, 21:16	#399 \| Link
Hart2hart Registered User Join Date: Aug 2016 Posts: 12	tsMuxer Open Source On Blu-ray tab, what does “Start mux time”represent? Thank you

13th February 2020, 13:49	#400 \| Link
justdan96 Registered User Join Date: Jun 2019 Location: UK Posts: 49	@staina sorry I'm not quite sure what you are saying, is it a UI issue?