Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
20th March 2011, 05:15 | #11581 | Link |
Guest
Posts: n/a
|
@jdobbs
Don't know why I didn't remember this before! I initially downloaded Win7DSFilterTweaker because BD-Rebuilder wasn't able to set the preferred filters. However I did install a TMPGEnc Authoring Works trial, but can't remember at what point, before or after BD-Rebuilder. So I will need to do another test. When I have some free time, maybe even tonight, i'll install Win 7 64bit in VirtualBox, and try again. If it really does have an issue on a 100% clean system with absolutely nothing else installed but what is on the first page, then it'll be worth looking at. At least a VirtualBox setup is going to be the same between all systems, and replicable. I'll update you ASAP. BTW, thanks for all the hard work. I don't use BD-Rebuilder that often, but it certainly comes in handy. Can't imagine how many hours of work has been put into it. Edit: Well, I don't think my BIOS allows 64bit Virtualization. I'll install the 32bit edition and test with that. Edit2: Fresh Win 7 32bit in VirtualBox. ffdshow, AviSynth, Haali. Let BD-RB set up prefs. No issues. Edit3: Filter tweaker causes same issue here (checked only for curiousity). Will try to find out what it was I must have done prior to that. Edit4: No luck. Oh well, will have to remain a mystery for now. Last edited by MickJT; 20th March 2011 at 13:21. |
20th March 2011, 17:39 | #11582 | Link | |
Aging Video Hobbyist
Join Date: Dec 2004
Location: Off the Map
Posts: 2,461
|
Quote:
Again, I know I used BD-RB in a way not intended, but am really grateful that it worked so well for this purpose. Thank you Mr. Dobbs. |
|
20th March 2011, 19:26 | #11583 | Link | |
Moderator
Join Date: Oct 2001
Posts: 20,976
|
Quote:
|
|
20th March 2011, 22:20 | #11584 | Link |
Registered User
Join Date: Oct 2009
Location: Cali, USA
Posts: 1
|
Yes, I do realize that this is a "Bug" thread, though I believe it is an important matter to address & hope it encourages others as it did me.
--I've been using this amazing program since V.2202. One glance at the threads & its obvious how much time you put into this, consistantly. I donated once before, happily & thankfuly considering how much I use BDR. Though I didn't know, & now makes sense, was the fact that in your responses to "Bugs" your putting out money to purchase the BD's etc. I didn't realize that it wasn't just your time & efforts (which in itself is exhaustingly extensive). --& for the person who wanted something "special" for his donation (the "Pro version"), well, brains are not a criteria for life it seems. For such an amazing program, which you continually put effort into making it the best, & for all the use I've got out of it (& money it's saved me) I'm pleased to donate when I can.. Thank you for all you have, & are, doing Last edited by MdMaynard; 20th March 2011 at 22:53. |
21st March 2011, 20:08 | #11587 | Link |
Registered User
Join Date: Sep 2010
Posts: 8
|
Help, please!
I am trying to encode the Blu-ray for "Cars" for a BD-25 with utter failure each time no matter if I use the Automatic setting, "High Quality" or even "High-Speed Option". This is the message that I keep getting:
Error in attempt to multiplex: MUX_00060.meta - Pes packet len too large ( >100Mb). Bad stream or invalid codec speciffed. [14:37:01] - Failed to build structure, aborted I figured that perhaps I had the wrong codecs installed, so I uninstalled and reinstalled FFDSHOW, Haali and AVISynth with the versions recommended on the first page of this post. Nonetheless, I still got the same error. I hope that someone could help me and explain what I'm doing wrong because this is the only Blu-ray disc that has posed any problems for me. Thank you in advance for any help! |
21st March 2011, 20:49 | #11588 | Link | |
Moderator
Join Date: Oct 2001
Posts: 20,976
|
Quote:
|
|
21st March 2011, 21:04 | #11590 | Link | |
Moderator
Join Date: Oct 2001
Posts: 20,976
|
Quote:
Can you post the log for this job? |
|
21st March 2011, 22:28 | #11593 | Link |
Registered User
Join Date: Jan 2009
Posts: 53
|
I don't know why when i select movie only backup the program displays a error window with this: header: "illegal source" message: "selected source is not BD format" and when i select full backup, the program displays the stream list but without the main movie, only the extras. (the png atached in my other post,pending of aproval)
|
22nd March 2011, 01:18 | #11594 | Link |
Registered User
Join Date: Sep 2010
Posts: 8
|
I shouldn't have wrote "download again." I was typing fast and not actually thinking. My source was the original Blu-ray disc - I used AnyDVD HD to rip it. I meant that I should download the movie rather than attempting to rip it again. . . . it certainly helps to think before actually typing (a little self-deprecating humor to try to stomach the annoying process of figuring this damn thing out!)
|
23rd March 2011, 04:18 | #11595 | Link |
Registered User
Join Date: Jan 2011
Posts: 163
|
JD, I have a sound delay problem of about 2 seconds doing a full disk backup of "Amarcord"
INF: Code:
[Status] LABEL=AMARCORD VERSION=v0.37.06 (beta) SOURCE_SIZE=45289906883 SOURCE_VIDEO_SIZE=44650407936 TARGET_SIZE=24641536000 REDUCTION=.537554709184371 RESIZE_1080=0 AUDIO_TO_KEEP=eng;ita; KEEP_HD_AUDIO=-1 SUBS_TO_KEEP=eng; BACKUP_MODE=0 MOVIEONLY_TYPE=0 USE_LAVF=0 QUICK=1 ENCODE_STEP=0 COMPLETED=9 REBUILD_COMPLETE=1 [00312] AUDIO=1 PGS= M2TS_TARGET=112316148 NSTART=27000000 NEND=33937920 NSIZE=104835072 FLINK=0 MLINK=0 [00316] AUDIO=1 PGS= M2TS_TARGET=197668758 NSTART=27000000 NEND=35288640 NSIZE=274624512 FLINK=0 MLINK=0 [00318] AUDIO=1 PGS= M2TS_TARGET=245901916 NSTART=27000000 NEND=37316160 NSIZE=310056960 FLINK=0 MLINK=0 [00317] AUDIO=1 PGS= M2TS_TARGET=332899289 NSTART=27000000 NEND=40965120 NSIZE=404563968 FLINK=0 MLINK=0 [00310] AUDIO=1 PGS=1 M2TS_TARGET=1006911770 NSTART=27000000 NEND=69072480 NSIZE=1543643136 FLINK=0 MLINK=0 [00307] AUDIO=1 PGS=1 M2TS_TARGET=1849132604 NSTART=27000000 NEND=109883520 NSIZE=1017636864 FLINK=0 MLINK=0 [00311] AUDIO=1 PGS=1 M2TS_TARGET=2877502645 RATE=7774 NSTART=27000000 NEND=146640960 NSIZE=2815346688 FLINK=0 MLINK=0 [00309] AUDIO=1 PGS=1 M2TS_TARGET=3390122735 RATE=6837 NSTART=27000000 NEND=186465600 NSIZE=3324715008 FLINK=0 MLINK=0 [00274] AUDIO=111 PGS=1 M2TS_TARGET=14206614845 RATE=12506 NSTART=27000000 NEND=361505925 NSIZE=14938859520 FLINK=0 MLINK=0 Code:
[07:49:29] BD Rebuilder v0.37.06 (beta) - Source: AMARCORD - Input BD size: 42.18 GB - Approximate total content: [04:53:23.302] - Target BD size: 22.95 GB - Windows Version: 5.1 [2600] - Auto Quality: Good (Very Fast), Two Pass - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640 [07:49:29] PHASE ONE, Encoding - [07:49:29] Extracting A/V streams [VID_00312] - [07:49:40] Reencoding: VID_00312 (1 of 9) - [07:54:47] Extracting A/V streams [VID_00316] - [07:55:05] Reencoding: VID_00316 (2 of 9) ----------------------- [08:24:24] BD Rebuilder v0.37.06 (beta) - Source: AMARCORD - Input BD size: 42.18 GB - Approximate total content: [04:53:23.302] - Target BD size: 22.95 GB - Windows Version: 5.1 [2600] - Auto Quality: Good (Very Fast), Two Pass - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640 - Resuming from previously started job. [08:24:28] PHASE ONE, Encoding - [08:24:28] Reencoding: VID_00316 (2 of 9) - [08:38:40] Extracting A/V streams [VID_00318] - [08:39:07] Reencoding: VID_00318 (3 of 9) - [08:53:43] Extracting A/V streams [VID_00317] - [08:54:25] Reencoding: VID_00317 (4 of 9) - [09:12:45] Extracting A/V streams [VID_00310] - [09:14:07] Reencoding: VID_00310 (5 of 9) - [10:18:44] Extracting A/V streams [VID_00307] - [10:21:32] Reencoding: VID_00307 (6 of 9) - [11:47:42] Extracting A/V streams [VID_00311] - [11:53:14] Reencoding: VID_00311 (7 of 9) - [19:35:26] Extracting A/V streams [VID_00309] - [19:39:50] Reencoding: VID_00309 (8 of 9) - [02:13:43] Extracting A/V streams [VID_00274] - [02:31:11] Reencoding: VID_00274 (9 of 9) [21:20:24]PHASE ONE complete [21:20:24]PHASE TWO - Rebuild Started - [21:20:24] Rebuilding BD file Structure [21:20:59] - Encode and Rebuild complete [21:20:59] Writing BD structure to ISO file - ImgBurn completed successfully [21:43:43]JOB: AMARCORD finished. Last edited by jdobbs; 23rd March 2011 at 05:22. |
24th March 2011, 06:51 | #11597 | Link |
Registered User
Join Date: Nov 2009
Location: North Las Vegas, NV
Posts: 112
|
BD_Rebuilder was changed recently to disable sleep mode while it was running. I believe it remains disabled even after the rebuild(s) is/are complete. Is it possible to re-enable it afterward?
|
24th March 2011, 10:16 | #11598 | Link |
Registered User
Join Date: Dec 2002
Posts: 1,022
|
0.37.06 appears to de-interlace European Blu-ray 1080i50 sources to 1080p25 if the "Use Decomb" box is ticked (if one is to believe MediaInfo). If we stick to standards, this should not happen as 1080p25 is not in the BD standard.
Last edited by colinhunt; 24th March 2011 at 10:19. |
|
|