Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
15th April 2020, 02:16 | #59102 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
https://1drv.ms/u/s!AgvFafeelEBikMw_...NcAMQ?e=VLmTw2
still having issues with CRU and frame drops, I just didnt leave the movie playing long enough for it to settle down, i'm now getting frame drops every 20 mins and I cant understand why, nothing I do at all changes it, i've tried several settings in optimize nothing does anything at all, its like something is locked on the hardware side on my system and creating a CRU wont even change it. I even did a new build of windows, same issue, tried a different TV, same issue, bypassed my receiver same issue, has to be a hardware issue on my PC but is should be capable of perfect timing but it just cant do it, I dont understand whats going on. Its not overheating, its running at a cool 40 degrees, i'm really out of ideas beyond taking a s0dding hammer to this piece of sh!t RX5700 anyone have any idea at all whats going on here or how I can diagnose the issue, unfortunately i no longer have my RX580 so I cant test that, I do have a NVDIA 1050 so I could drop that in to see what happens.
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 09:37 | #59104 | Link | ||
Registered User
Join Date: Mar 2002
Posts: 2,323
|
Quote:
- FSRCNNX-8-0-4-1: is between NGU Sharp Low and Med ! - FSRCNNX-16-0-4-1: is in the middle of NGU Sharp High and VeryHigh But when "fbo-format=rgba32f" is set (similar to madVR's internal 32bit processing), then even the fastest FSRCNNX-8-0-4-1 version becomes slower then NGU Sharp High! (A bit faster than FSRCNNX-16-0-4-1 with "fbo-format=rgba16hf") Quote:
And it would be nice to also include NGU Sharp Low/Med/High.
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config Last edited by chros; 26th July 2020 at 01:24. |
||
15th April 2020, 11:34 | #59105 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
Hi, this is what i mean by locked, no matter what i choose it settles to around 20 minutes.
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 11:47 | #59106 | Link |
QB the Slayer
Join Date: Feb 2011
Location: Toronto
Posts: 697
|
Try my guide:
https://forum.doom9.org/showthread.p...31#post1895131 QB EDIT: I would first delete any CRU changes (active and inactive) you have made in the past and reboot. Then try my guide
__________________
Last edited by QBhd; 15th April 2020 at 11:49. |
15th April 2020, 12:13 | #59107 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
thanks I did that but that trashed my entire AMD install, couldnt then load control panel at all, had to do a factory reset driver reinstall, i'm going to have to start ruling stuff out. i'm going to drop in my old 1080p amd in to see what i get with that.
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 13:03 | #59108 | Link |
Registered User
Join Date: Oct 2012
Location: Akron, OH
Posts: 491
|
Were you using any custom resolutions in the AMD control panel? Try uninstalling your GPU driver with the DDU utility and reset CRU. Get rid of madVR custom resolutions, too. Then take a look at how many different resolutions Windows is showing for your GPU. It should be showing only the defaults for your display.
You should then have a clean slate, and can rebuild what you want in CRU and madVR (after re-installing the RX-5700 drivers). |
15th April 2020, 13:16 | #59109 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
Hi, i've never used any custom res at all, ever. First thing I did when I found this issue is wipe using DDU and check what resolutions were showing, all looked normal, i've genuinely chucked everything at this now I'm sure and with dropping in my old 1080p card solving this i'm sure its either the RX5700 or some incompatibilty with my current hardware setup, I just cant find it though.
I'm trying an old PC image again now to see if I missed anythign, i'm wiping AMD drivers with DDU and going right back to lav 072 and MADVR 914 couple with a pre 2020 version of the AMD drivers.
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 13:35 | #59110 | Link |
Registered User
Join Date: Apr 2017
Posts: 366
|
As I mentioned, no issues here.....after 7 mins it shows no dropped/repeat frames @ 2160 23p.....i was pleased at 1 frame drop every 6 days lol.
No AMD or Madvr custom res etc, all standard.
__________________
LG OLED55BX6LB, Zidoo Z1000 Pro, Yamaha RX-A3060, Polk Signature Fronts & Centre, Wharfedale D300 Atmos surrounds, Polk Signature HTS 10 Sub, DSPeaker Antimode 8033 Cinema |
15th April 2020, 13:56 | #59111 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
lol, dont rub it in now mate
can you post a screen shot of you full CONTOL-J screen, with your setup being almost identical to mine i want to see if we have anything setup fundamentally different, leave it for a good 5 mins though like you say. let me know what movie it is too so i try playing the exact same one. cheers
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 14:19 | #59112 | Link |
Registered User
Join Date: Apr 2017
Posts: 366
|
No problem:
https://imgshare.io/image/img-1179.4Qq6c Lav set to d3d11 copyback, film is The Avengers 4k HDR release.
__________________
LG OLED55BX6LB, Zidoo Z1000 Pro, Yamaha RX-A3060, Polk Signature Fronts & Centre, Wharfedale D300 Atmos surrounds, Polk Signature HTS 10 Sub, DSPeaker Antimode 8033 Cinema |
15th April 2020, 14:27 | #59113 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
You display shows similar to mine 23,975, no idea what's up with my system then, losing will to live ;(
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 14:28 | #59114 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
I'll try a madvr cru again in case I didn't di it right.
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 14:35 | #59115 | Link |
Registered User
Join Date: Apr 2017
Posts: 366
|
Have you tried amdcleanuputility-x64.exe? It removes more than DDU - worth a shot anyway.
__________________
LG OLED55BX6LB, Zidoo Z1000 Pro, Yamaha RX-A3060, Polk Signature Fronts & Centre, Wharfedale D300 Atmos surrounds, Polk Signature HTS 10 Sub, DSPeaker Antimode 8033 Cinema |
15th April 2020, 14:54 | #59116 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
https://1drv.ms/u/s!AgvFafeelEBikMxG...ZxVvQ?e=DXa1hZ
ok,. did timings again, these make no sense to me at all, so here I should choose EDID / CTA or pixel clock #1?
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 15:03 | #59117 | Link |
Registered User
Join Date: Aug 2016
Posts: 1,348
|
ok, i chose pixel clock #1 - it did nothing at all, still shows 1 frame drop over 20+ minutes, i'm lost with this...what could I be doing wrong, could the GPU be trashed?
https://1drv.ms/u/s!AgvFafeelEBikMxH...UluvQ?e=TYlt9S
__________________
LG OLED EF950-YAM RX-V685-RYZEN 3600 - 16GBRAM - WIN10 RX 5700 - https://www.videohelp.com/software/madVR/old-versions |
15th April 2020, 15:05 | #59118 | Link |
QB the Slayer
Join Date: Feb 2011
Location: Toronto
Posts: 697
|
@oldpainlesskodi.... what audio renderer do you use? Your values look similar to mine, I gave up trying to get perfect timings and instead switched from "direct sound" to WASAPI.
QB
__________________
|
15th April 2020, 15:07 | #59119 | Link |
Registered User
Join Date: Apr 2017
Posts: 366
|
I'm using Directsound as the audio renderer.
Odd, you have the same card (ish), and I get no repeat/dropped frames using the standard amd 23p (after 5-7 mins).
__________________
LG OLED55BX6LB, Zidoo Z1000 Pro, Yamaha RX-A3060, Polk Signature Fronts & Centre, Wharfedale D300 Atmos surrounds, Polk Signature HTS 10 Sub, DSPeaker Antimode 8033 Cinema |
Tags |
direct compute, dithering, error diffusion, madvr, ngu, nnedi3, quality, renderer, scaling, uhd upscaling, upsampling |
|
|