Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
9th February 2012, 16:48 | #14321 | Link |
Registered User
Join Date: Dec 2002
Posts: 1,022
|
DGDecNV + 4-way multiprocessing
Pass 1: 42-43 fps VPU load: 71-82% GPU RAM: 662 of 896 MB in use CPU load: 30-38% (2 x Xeon E5520, 12GB RAM) I believe the low fps for pass 1 with 6-way split was caused by the VPU choking. My graphics card is an old GTX 275 and judging by the tests so far, I'd say 5-way multiprocessing is the limit for its VPU. Last edited by colinhunt; 9th February 2012 at 17:25. |
9th February 2012, 17:06 | #14322 | Link |
Suspended for forum rule violations
Join Date: Jul 2006
Posts: 528
|
OK! I hear you all... just made a 15$ donation to Mr. Donald A. Graft and DGDecNV...
I got 2 Asus Nvidia Geforce GTX 560 Ti DCII TOP 1GB in SLI. Will DGDecNV use both GPU's? I'll try it and hopefully get some speed improvements. regards Last edited by varekai; 9th February 2012 at 17:13. Reason: . |
9th February 2012, 18:11 | #14323 | Link |
Registered User
Join Date: Dec 2011
Posts: 9
|
Missing folder CERTIFICATE
good Afternoon
I just do the conversion from a Blu-ray to AVCHD with BD Rebuilder take more than 18 hours in the end did not come all the BDMV folder without the CERTIFICATE folder so I did a test starting this folder create a BDMV ISO did not run as expected does anyone know the solution as a folder is missing! Thank you! |
9th February 2012, 18:39 | #14324 | Link | |
Moderator
Join Date: Oct 2001
Posts: 20,976
|
Quote:
|
|
9th February 2012, 19:15 | #14325 | Link |
Elit Amans
Join Date: Feb 2005
Location: Sweden
Posts: 275
|
Maybe found a bug.. I licensed and installed DG.. Set it up in BDRB and took it for a spin.. Worked but gave me worse result than with DS, for example ~70fps(DG) against ~100+fps (DS). And this was the same test setup and movie as the last speed test.. And now for the bug. For comparison I went back to DS decoding and when I got to main movie it gave me - Failed video encode, aborted.. below are the logs.
Code:
[Options] VERSION=0.40.0.4 MODE=0 ENCODE_QUALITY=3 ONEPASS_ENCODING=0 AUTO_QUALITY=0 TARGET_SIZE=24400 AUDIO_TO_KEEP=eng;jpn; SUBS_TO_KEEP=deu;eng;ger;swe; SD_CONVERT=0 OPEN_GOP=1 RESIZE_1080=0 DEINTERLACE=1 SD_TO_1080=0 CONVERT_WIDE=0 DTS_REENCODE=0 AC3_REENCODE=0 AC3_640=1 AC3_192=0 KEEP_HD_AUDIO=0 AVCHD=1 REMOVE_WORKFILES=0 MOVIE_ONLY_LOOP=1 REMOVE_OUTPUT=0 USE_FILTERS=0 BDMV_CERT_ONLY=0 USE_LAVF=0 IVTC_PULLDOWN=1 ASSUME_DVD_PAL=0 UNMASK_CHAPTER=0 COMPLETION_BEEP=0 AUDIO_TRACK_LIMIT=1 SUBTITLE_TRACK_LIMIT=1 CUSTOM_TARGET_SIZE=8250 DTSX=1 B_PYRAMID=1 QUICK_EXTRAS=0 MULTIPROCESS=5 DGDECNV=0 [Paths] SOURCE_PATH=E:\TEMP\THE GIRL WHO LEAPT THROUGH TIME\ WORKING_PATH=C:\TEMP\ DGIndexNV=C:\VidSoft\BD_Rebuilder\Tools\DG\DGIndexNV.exe DGDecNV=C:\VidSoft\BD_Rebuilder\Tools\DG\DGDecodeNV.dll Code:
"C:\VidSoft\BD_Rebuilder\tools\x264.exe" "C:\TEMP\WORKFILES\VID_00014.5.AVS" --preset slow --bluray-compat --ref 4 --b-adapt 1 --b-pyramid strict --weightp 1 --open-gop --qpmin=0 --bitrate 8002 --level 4.1 --qpfile "C:\TEMP\WORKFILES\VID_00014.5.CHP" --sar 1:1 --aud --nal-hrd vbr --pic-struct --vbv-bufsize 13000 --keyint 24 --min-keyint 1 --ipratio 1.1 --pbratio 1.1 --vbv-maxrate 15000 --threads auto --slices 4 --thread-input - -stats "C:\TEMP\WORKFILES\VID_00014.AVS.5.264.stats" --pass 1 --output NUL Code:
---------------------- [02-09-12] BD Rebuilder v0.40.04 (beta) [18:09:20] Source: THE_GIRL_WHO_LEAPT_THROUGH_TIME - Input BD size: 21,88 GB - Approximate total content: [01:43:33.102] - Target BD size: 8,06 GB - Windows Version: 6.1 [7601] - Quality: Highest (Very Slow), Two Pass - Decoding/Frame serving: DirectShow [5-way] - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640 [18:09:20] PHASE ONE, Encoding - [18:09:20] Processing: VID_00000 (1 of 4) - [18:09:20] Extracting A/V streams [VID_00000] - [18:09:24] Reencoding video [VID_00000] - Source Video: MPEG-2, 1920x1080 - Rate/Length: 23,976fps, 720 frames - Bitrate: 5*356 Kbs - [18:09:24] Reencoding: VID_00000, Pass 1 of 2 - [18:09:30] Reencoding: VID_00000, Pass 2 of 2 - [18:09:39] Video Encode complete - [18:09:39] Processing audio tracks - [18:09:39] Multiplexing M2TS - [18:09:43] Processing: VID_00009 (2 of 4) - [18:09:43] Extracting A/V streams [VID_00009] - [18:09:50] Reencoding video [VID_00009] - Source Video: MPEG-4 (AVC), 1920x1080 - Rate/Length: 23,976fps, 6*257 frames - Bitrate: 2*260 Kbs - [18:09:50] Reencoding: VID_00009, Pass 1 of 2 - [18:12:29] Reencoding: VID_00009, Pass 2 of 2 - [18:14:56] Video Encode complete - [18:14:56] Processing audio tracks - Track 4352 (jpn): Keeping original audio - Track 4353 (jpn): Keeping original audio - Track 4354 (jpn): Keeping original audio - [18:14:56] Multiplexing M2TS - [18:15:10] Processing: VID_00014 (3 of 4) - [18:15:10] Extracting A/V streams [VID_00014] - [18:17:07] Reencoding video [VID_00014] - Source Video: MPEG-4 (AVC), 1920x1080 - Rate/Length: 23,976fps, 141*415 frames - Bitrate: 8*002 Kbs - [18:17:07] Reencoding: VID_00014, Pass 1 of 2 - Encode failed. Aborting. - BD-Rebuilder v0.40.04 (beta) - Windows Version: 6.1 [7601] - AVISYNTH Version: 2.5.8.0, Ok - HAALI Splitter: 1.11.96.14, Ok - FFDSHOW: 3882, Ok - WIN7 preferred AVC CODEC: Ok - WIN7 preferred VC-1 CODEC: Ok - WIN7 preferred MPEG2 CODEC: Ok - FFDSHOW VC-1 set to "wmv9", Ok - FFDSHOW MPEG2 set to "libavcodec": Ok - FFDSHOW AVC set to "ffmpeg-mt": Ok - X264: Ok - AFTEN: Ok - FAAC: Ok - MP4BOX: Ok - WAVI: Ok - TSMUXER: Ok [18:17:07] - Failed video encode, aborted Code:
[Status] LABEL=THE_GIRL_WHO_LEAPT_THROUGH_TIME VERSION=v0.40.04 (beta) SOURCE_SIZE=23488221533 SOURCE_VIDEO_SIZE=23466332160 TARGET_SIZE=8650752000 REDUCTION=.367712455792665 RESIZE_1080=0 AUDIO_TO_KEEP=eng;jpn; KEEP_HD_AUDIO=0 SUBS_TO_KEEP=deu;eng;ger;swe; BACKUP_MODE=0 MOVIEONLY_TYPE=0 USE_LAVF=0 INSTANCES=5 DGDECNV=0 QUICK=0 ENCODE_STEP=1.5 COMPLETED=2 [00000] AUDIO= PGS= VIDEO2=0 V2MBRATE=0 M2TS_TARGET=21627564 RATE=5356 NSIZE=10887168 FLINK=0 MLINK=-1 [00009] AUDIO=111 PGS= VIDEO2=0 V2MBRATE=0 M2TS_TARGET=255163686 RATE=2260 NSIZE=259049472 FLINK=0 MLINK=-1 [00014] AUDIO=0110 PGS=010001 VIDEO2=0 V2MBRATE=0 M2TS_TARGET=8341755754 RATE=8002 Last edited by jdobbs; 9th February 2012 at 19:57. |
9th February 2012, 20:00 | #14326 | Link |
Moderator
Join Date: Oct 2001
Posts: 20,976
|
I'm guessing you're working on a system that is counting hyperthreading as if it represents "real" processors. BD-RB takes the Windows environment variable NUMBER_OF_PROCESSORS literally. I can see that you have at least 5 splits going on. That's probably bringing your system to a point of degenerated return. I'd suggest you set MULTIPROCESS=2 as a start and see how that works out.
Not sure about the DS error -- try reinstalling to counter the impact of other software that is tweaking your system, that's the usual cure. Last edited by jdobbs; 9th February 2012 at 20:05. |
9th February 2012, 23:45 | #14330 | Link | |
Elit Amans
Join Date: Feb 2005
Location: Sweden
Posts: 275
|
Quote:
//LD |
|
9th February 2012, 23:54 | #14331 | Link | |
Moderator
Join Date: Oct 2001
Posts: 20,976
|
Quote:
|
|
10th February 2012, 00:11 | #14333 | Link |
Registered User
Join Date: Jan 2010
Location: USA, Oregon
Posts: 791
|
Jdobbs. Go have dinner on me Or buy some more blu rays, or whatever you want. A big thank you for all you do.
If I can get the GTX 560 Ti here soon, I'll try some more testing
__________________
Only one rooster, need be in the hen house... |
10th February 2012, 03:28 | #14338 | Link |
Registered User
Join Date: May 2011
Posts: 34
|
I've observed with several test runs on an AMD 6core CPU (Phenom II x6 1090T @3.6Ghz) and an Nvidia GTX460 GPU (VP4) and 4GB memory with Windows 7x64,
that using DGDecNV is up to 25% slower than ffdshow directshow if encoding with x264 on the superfast setting. However, with the x264 faster setting or lower, DGDecNV is about 7-10% faster than ffdshow on my system. On my system I can also run with multiprocess for 2 instances using under 3GB RAM total and with DGDecNV and x264 faster setting and 24fps 1080p AVC video source, get speeds of pass1@2.8x(67fps) and pass2@2.1x(51fps) In pass1 I get about 65% use of all six CPU cores with ~3GB RAM used, and GPU video engine at 99% with 288MB GPU memory used. In pass2 I get full 100% use of all six CPU cores with ~2.8GB RAM used, and GPU video engine at 80% with 289MB GPU memory used. Testing with DGDecNV and x264 faster setting with only 1 pass ABR to a 25GB output from a 1080p AVC source, I found with my system I get essentially the same speed with multiprocess off vs 2 instances since the CPU load on all six cores is 100% either way. In this case I'm getting a speed of about 1.25x (30fps) with 100% CPU load and 50% GPU load. Appears that on my system that multiprocess mode only speeds up 2 pass encoding at faster or lower settings, especially with the DGDecNV decoder - good for 4-8GB output builds. And for 25GB (BD-R) builds where 1pass ABR is good enough, I can just run with multiprocess off for good speed on my system. I measured GPU video engine load using GPU-Z software. So with my system setup for superfast/veryfast x264 runs regular ffdshow and no multiprocess is ok/best, but for higher quality with smaller output size with x264 setting of faster or lower then DGDecNV decoding and multiprocess=2 is best. Not sure if adding more RAM to up it to 8-12GB to run at multiprocess=3 would speed it up much more to be worth the ~$50 cost to buy some 8GB DDR3 1600 RAM? Last edited by NightHawkGuy; 10th February 2012 at 07:42. |
10th February 2012, 07:15 | #14339 | Link |
Registered User
Join Date: Jan 2010
Posts: 227
|
Help?
I've been using BD Rebuilder successfully for a while now to convert Blurays to MKV (via alternate movie only, MKV Container/1920x1080/Intact Audio), which I put on a windows share to be accessed/played with my LG BD390 and BD570 bluray players (wired gigabit Ethernet). With build 0.40.4, the files wont play. It looks like they are going to start, but the LG goes right back to the file list. To upgrade, all I did was like I've done in the past... downloaded the new version, unzipped it, and copied the files into the existing directory (overwriting the old ones). Any suggestions? Hope the following info helps. Let me know if anything else is needed... Here is info on a recode I did of GROUNDHOG_DAY with v0.39.07 that works.. Code:
[Status] LABEL=GROUNDHOG_DAY VERSION=v0.39.07 (beta) SOURCE_SIZE=26590912512 SOURCE_VIDEO_SIZE=26590912512 TARGET_SIZE=24641536000 REDUCTION=.926690123510418 RESIZE_1080=0 AUDIO_TO_KEEP=eng; KEEP_HD_AUDIO=-1 SUBS_TO_KEEP=eng; BACKUP_MODE=1 MOVIEONLY_TYPE=11 USE_LAVF=0 QUICK=0 ENCODE_STEP=0 COMPLETED=1 REBUILD_COMPLETE=1 [00011] AUDIO=10010 PGS=110000000000000000000 VIDEO2=0 V2MBRATE=0 M2TS_TARGET=24641536000 NSIZE=0 FLINK=0 MLINK=0 Code:
----------------------- [00:10:33] BD Rebuilder v0.39.07 (beta) - Source: GROUNDHOG_DAY - Input BD size: 24.76 GB - Approximate total content: [01:41:04.057] - Windows Version: 6.1 [7601] - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled - Mode: MKV Container, 1920x1080, Intact Audio - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640 [00:10:35] PHASE ONE, Encoding - [00:10:35] Processing: VID_00011 (1 of 1) - [00:10:35] Extracting A/V streams [VID_00011] - [00:17:40] Reencoding video [VID_00011] - Source Video: MPEG-4 (AVC), 1920x1080 - Rate/Length: 23.976fps, 145,392 frames - Bitrate: 10,187 Kbs - [00:17:40] Reencoding: VID_00011, Pass 1 of 2 - [01:21:52] Reencoding: VID_00011, Pass 2 of 2 - [02:28:22] Video Encode complete - [02:28:22] Processing audio tracks - [02:28:22] Multiplexing M2TS [02:28:22]PHASE ONE complete [02:28:22]PHASE TWO - Rebuild Started - [02:28:22] Rebuilding stream 00011 [1 of 1] - [02:28:22] Building ALTERNATE OUTPUT Structure [02:33:30] - Encode and Rebuild complete [02:33:31]JOB: GROUNDHOG_DAY finished. ---------------------- Code:
General Unique ID : 243937437596447059580597332619115883905 (0xB784A43D6F1D0AACB07DD7DD3B97ED81) Complete name : J:\[Movies]\GROUNDHOG_DAY\GROUNDHOG_DAY_00.MKV Format : Matroska Format version : Version 2 File size : 7.64 GiB Duration : 1h 41mn Overall bit rate mode : Variable Overall bit rate : 10.8 Mbps Encoded date : UTC 2012-02-07 07:28:23 Writing application : mkvmerge v2.9.7 ('Tenderness') built on Jul 1 2009 18:43:35 Writing library : libebml v0.7.7 + libmatroska v0.8.1 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings, CABAC : Yes Format settings, ReFrames : 2 frames Codec ID : V_MPEG4/ISO/AVC Duration : 1h 41mn Bit rate mode : Variable Bit rate : 10.2 Mbps Maximum bit rate : 15.0 Mbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.205 Stream size : 7.04 GiB (92%) Writing library : x264 core 120 r2120 0c7dab9 Encoding settings : cabac=1 / ref=1 / deblock=1:0:0 / analyse=0x3:0x3 / me=dia / subme=1 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=12 / sliced_threads=0 / slices=4 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=1 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=1 / keyint=48 / keyint_min=1 / scenecut=40 / intra_refresh=0 / rc_lookahead=0 / rc=2pass / mbtree=0 / bitrate=10187 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=15000 / vbv_bufsize=15000 / nal_hrd=vbr / ip_ratio=1.10 / pb_ratio=1.10 / aq=1:1.00 Default : Yes Forced : No Audio #1 ID : 2 Format : AC-3 Format/Info : Audio Coding 3 Mode extension : CM (complete main) Codec ID : A_AC3 Duration : 1h 41mn Bit rate mode : Constant Bit rate : 448 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 324 MiB (4%) Language : English Default : Yes Forced : No Audio #2 ID : 3 Format : AC-3 Format/Info : Audio Coding 3 Format profile : Dolby Digital Mode extension : CM (complete main) Codec ID : A_AC3 Duration : 1h 41mn Bit rate mode : Constant Bit rate : 192 Kbps Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 139 MiB (2%) Language : English Default : No Forced : No Menu 00:00:00.000 : en:00:00:00.000 00:07:26.863 : en:00:07:26.863 00:14:12.935 : en:00:14:12.935 00:18:17.221 : en:00:18:17.221 00:24:30.385 : en:00:24:30.385 00:30:43.341 : en:00:30:43.341 00:34:32.653 : en:00:34:32.653 00:41:00.624 : en:00:41:00.624 00:45:54.501 : en:00:45:54.501 00:52:39.823 : en:00:52:39.823 00:59:21.182 : en:00:59:21.182 01:06:08.047 : en:01:06:08.047 01:14:55.490 : en:01:14:55.490 01:19:59.169 : en:01:19:59.169 01:24:11.087 : en:01:24:11.087 01:32:13.611 : en:01:32:13.611 Code:
[Status] LABEL=GROUNDHOG_DAY VERSION=v0.40.04 (beta) SOURCE_SIZE=26590912512 SOURCE_VIDEO_SIZE=26590912512 TARGET_SIZE=24641536000 REDUCTION=.926690123510418 RESIZE_1080=0 AUDIO_TO_KEEP=eng; KEEP_HD_AUDIO=-1 SUBS_TO_KEEP=eng; BACKUP_MODE=1 MOVIEONLY_TYPE=11 USE_LAVF=0 INSTANCES=1 DGDECNV=0 QUICK=0 ENCODE_STEP=0 COMPLETED=1 REBUILD_COMPLETE=1 [00011] AUDIO=10010 PGS=110000000000000000000 VIDEO2=0 V2MBRATE=0 M2TS_TARGET=24641536000 NSIZE=0 FLINK=0 MLINK=0 Code:
---------------------- [02/09/12] BD Rebuilder v0.40.04 (beta) [08:19:25] Source: GROUNDHOG_DAY - Input BD size: 24.76 GB - Approximate total content: [01:41:04.057] - Windows Version: 6.1 [7601] - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled - Mode: MKV Container, 1920x1080, Intact Audio - Decoding/Frame serving: DirectShow - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640 [08:19:27] PHASE ONE, Encoding - [08:19:27] Processing: VID_00011 (1 of 1) - [08:19:27] Extracting A/V streams [VID_00011] - [08:26:32] Reencoding video [VID_00011] - Source Video: MPEG-4 (AVC), 1920x1080 - Rate/Length: 23.976fps, 145,392 frames - Bitrate: 8,075 Kbs - [08:26:32] Reencoding: VID_00011, Pass 1 of 2 - [09:28:59] Reencoding: VID_00011, Pass 2 of 2 - [10:31:52] Video Encode complete - [10:31:52] Processing audio tracks - [10:31:52] Multiplexing M2TS [10:31:52]PHASE ONE complete [10:31:52]PHASE TWO - Rebuild Started - [10:31:52] Rebuilding stream 00011 [1 of 1] - [10:31:52] Building ALTERNATE OUTPUT Structure [10:37:01] - Encode and Rebuild complete [10:37:01] JOB: GROUNDHOG_DAY finished. Code:
General Unique ID : 199774127402341520045391125516082624458 (0x964B18EFB7B37330A3DAEB23CF4637CA) Complete name : J:\[Movies]\1-TEST\GROUNDHOG_DAY\GROUNDHOG_DAY_00.MKV Format : Matroska Format version : Version 2 File size : 7.07 GiB Duration : 1h 41mn Overall bit rate mode : Variable Overall bit rate : 10.0 Mbps Encoded date : UTC 2012-02-09 15:31:54 Writing application : mkvmerge v5.2.1 ('A Far Off Place') built on Jan 2 2012 23:21:10 Writing library : libebml v1.2.3 + libmatroska v1.3.0 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings, CABAC : Yes Format settings, ReFrames : 2 frames Muxing mode : Header stripping Codec ID : V_MPEG4/ISO/AVC Duration : 1h 41mn Bit rate mode : Variable Nominal bit rate : 8 075 Kbps Maximum bit rate : 15.0 Mbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 23.976 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.162 Writing library : x264 core 120 r2164 da19765 Encoding settings : cabac=1 / ref=1 / deblock=1:0:0 / analyse=0x3:0x3 / me=dia / subme=1 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=12 / sliced_threads=0 / slices=4 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=1 / constrained_intra=0 / bframes=3 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=1 / keyint=48 / keyint_min=1 / scenecut=40 / intra_refresh=0 / rc_lookahead=0 / rc=2pass / mbtree=0 / bitrate=8075 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=15000 / vbv_bufsize=15000 / nal_hrd=vbr / ip_ratio=1.10 / pb_ratio=1.10 / aq=1:1.00 Default : Yes Forced : No Audio #1 ID : 2 Format : TrueHD Codec ID : A_TRUEHD Duration : 1h 41mn Bit rate mode : Variable Maximum bit rate : 3 069 Kbps Channel(s) : 6 channels Channel positions : Front: L C R, Side: L R, LFE Sampling rate : 48.0 KHz Compression mode : Lossless Language : English Default : Yes Forced : No Audio #2 ID : 3 Format : AC-3 Format/Info : Audio Coding 3 Format profile : Dolby Digital Mode extension : CM (complete main) Muxing mode : Header stripping Codec ID : A_AC3 Duration : 1h 41mn Bit rate mode : Constant Bit rate : 192 Kbps Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz Bit depth : 16 bits Compression mode : Lossy Stream size : 139 MiB (2%) Language : English Default : No Forced : No Menu 00:00:00.000 : en:00:00:00.000 00:07:26.863 : en:00:07:26.863 00:14:12.935 : en:00:14:12.935 00:18:17.221 : en:00:18:17.221 00:24:30.385 : en:00:24:30.385 00:30:43.341 : en:00:30:43.341 00:34:32.653 : en:00:34:32.653 00:41:00.624 : en:00:41:00.624 00:45:54.501 : en:00:45:54.501 00:52:39.823 : en:00:52:39.823 00:59:21.182 : en:00:59:21.182 01:06:08.047 : en:01:06:08.047 01:14:55.490 : en:01:14:55.490 01:19:59.169 : en:01:19:59.169 01:24:11.087 : en:01:24:11.087 01:32:13.611 : en:01:32:13.611 |
10th February 2012, 09:44 | #14340 | Link |
Registered User
Join Date: Sep 2004
Location: New Zealand
Posts: 15
|
I'm guessing the Header stripping listed under Muxing mode in MediaInfo is the problem. It is a quick fix with MkvMerge.
Instructions at this link http://www.noblemd.info/index.php?op...d=21&Itemid=24 Last edited by KiwiKid; 10th February 2012 at 09:48. |
|
|