Media Player Classic - BE Win32/x64 - Page 306

Aleksoid1978 · 10th March 2019, 23:24

Quote:

Originally Posted by Perenista

I am having problems with this program.

Sound crackling on EVERY FILE tested.

What should I do?

What version use, show filter list when playback.

Perenista · 10th March 2019, 23:43

Quote:

Originally Posted by Aleksoid1978

What version use, show filter list when playback.

Version 1.5.3 (build 4455) beta

A few settings tried
https://imgur.com/a/EgG4AhK

Filtros externos = external filters

I changed that area by adding LAV and selecting PREFER, but that didn't help, still crackling.

Aleksoid1978 · 11th March 2019, 00:10

Quote:

Originally Posted by Perenista

Version 1.5.3 (build 4455) beta

A few settings tried
https://imgur.com/a/EgG4AhK

Filtros externos = external filters

I changed that area by adding LAV and selecting PREFER, but that didn't help, still crackling.

Try reset settings and delete all external filters. Just for test.

P.S. Check on latest SVN - https://yadi.sk/d/hlf1lfC8mKU58/!_last

Perenista · 11th March 2019, 04:57

Quote:

Originally Posted by Aleksoid1978

Try reset settings and delete all external filters. Just for test.

I was looking for this and couldn't find (reset to factory settings). Where should I go?

Aleksoid1978 · 11th March 2019, 05:17

Quote:

Originally Posted by Perenista

I was looking for this and couldn't find (reset to factory settings). Where should I go?

Options -> Miscellaneous -> Settings management

Grimsdyke · 11th March 2019, 10:20

I love the dual-audio out feature of BE !! But unfortunately I do need much more gain on HDMI (=> connected to TV) than on 5.1-Analog (=> connected to Amplifier).
Would it be possible to add a second slider so that gain could be adjusted independently ?

Aleksoid1978 · 11th March 2019, 10:25

Quote:

Originally Posted by Grimsdyke

I love the dual-audio out feature of BE !! But unfortunately I do need much more gain on HDMI (=> connected to TV) than on 5.1-Analog (=> connected to Amplifier).
Would it be possible to add a second slider so that gain could be adjusted independently ?

Volume slider ?? If so - not.

Manni · 11th March 2019, 10:40

Quote:

Originally Posted by Grimsdyke

I love the dual-audio out feature of BE !! But unfortunately I do need much more gain on HDMI (=> connected to TV) than on 5.1-Analog (=> connected to Amplifier).
Would it be possible to add a second slider so that gain could be adjusted independently ?

If you need more volume on HDMI it could be because you are converting to LPCM before sending to the AVR. If it's an option in your setup, try to bitstream audio over HDMI, volume tends to be higher in that case. But then of course you have no volume control from MPC.

Grimsdyke · 11th March 2019, 10:50

@Aleksoid. I mean: Options -> Audio -> Sound Processing -> Volume Control -> GAIN. Would need one slider for each audio out.
@Manni. Thanx, I will check that.

Aleksoid1978 · 11th March 2019, 11:05

Dual audio not working for bitstreaming + PCM output.

Only bitstream or PCM

Grimsdyke · 11th March 2019, 11:18

Bitstreaming over HDMI seem to be not louder on my equipment.

Manni · 11th March 2019, 11:42

Quote:

Originally Posted by Grimsdyke

Bitstreaming over HDMI seem to be not louder on my equipment.

It's not always the case, but it was worth checking

beter · 22nd March 2019, 00:33

Update for translation of Chinese traditional and Dutch
https://www.sendspace.com/file/x1lt1i

Anima123 · 22nd March 2019, 03:36

Using recent mpc-be builds (till 4455, didn't test latest), the progress bar will not appear for a while after starting playback the video, and certainly not be able to enter full-screen mode by Alt-Enter.

mkver · 22nd March 2019, 21:44

DVBSUB subtitles are usually displayed until the next subtitle packet (often an empty subtitle that just says "Stop displaying the previous subtitles") is due for display. If a file does not contain these end-of-display subtitles, MPC-BE crashes. Such files can be produced by e.g. splitting files with mkvmerge. It doesn't seem to matter whether the DVBSUB packet (in Matroska) is in a SimpleBlock or a BlockGroup with an explicit nonzero duration or a BlockGroup with a zero duration. Here, here and here are samples for this. I can sometimes produce crashes if I am near the end of a transport stream with DVBSUBs as active subtitles, so this doesn't seem to be limited to Matroska, although it is not so easy to reproduce the crash there.

(If a DVBSUB in a BlockGroup has a nonzero duration, then actually this should be used as the duration; it should override the duration implied by the next subtitle packet. (The reason I am treating a BlockGroup with a zero duration specially is that FFmpeg has a bug in that it writes duration zero if the duration is unknown.))

Arm3nian · 23rd March 2019, 10:13

If I seek before a file starts to play initially, MPC-BE stops responding. Same if I seek a second time too quickly after the first one. Turning off wait for render queue in madVR makes it better, but it still crashes. This has been happening ever since the UI change. I've tried nightlies of MPC-BE and LAV for a month but it does the same thing.

Also, before the UI change, if I had 2 screens connected, and I switched the file to fullscreen, and pulled the display plug on one of them, it would automatically continue playing on the other display. Doesn't do that anymore.

Aleksoid1978 · 23rd March 2019, 10:44

Quote:

Originally Posted by mkver

DVBSUB subtitles are usually displayed until the next subtitle packet (often an empty subtitle that just says "Stop displaying the previous subtitles") is due for display. If a file does not contain these end-of-display subtitles, MPC-BE crashes. Such files can be produced by e.g. splitting files with mkvmerge. It doesn't seem to matter whether the DVBSUB packet (in Matroska) is in a SimpleBlock or a BlockGroup with an explicit nonzero duration or a BlockGroup with a zero duration. Here, here and here are samples for this. I can sometimes produce crashes if I am near the end of a transport stream with DVBSUBs as active subtitles, so this doesn't seem to be limited to Matroska, although it is not so easy to reproduce the crash there.

(If a DVBSUB in a BlockGroup has a nonzero duration, then actually this should be used as the duration; it should override the duration implied by the next subtitle packet. (The reason I am treating a BlockGroup with a zero duration specially is that FFmpeg has a bug in that it writes duration zero if the duration is unknown.))

Thanks - fixed.

Aleksoid1978 · 23rd March 2019, 10:45

Quote:

Originally Posted by Arm3nian

If I seek before a file starts to play initially, MPC-BE stops responding. Same if I seek a second time too quickly after the first one. Turning off wait for render queue in madVR makes it better, but it still crashes. This has been happening ever since the UI change. I've tried nightlies of MPC-BE and LAV for a month but it does the same thing.

Also, before the UI change, if I had 2 screens connected, and I switched the file to fullscreen, and pulled the display plug on one of them, it would automatically continue playing on the other display. Doesn't do that anymore.

1 - reset settings.
2 - try without LAV and madVR.

Anima123 · 23rd March 2019, 19:33

Quote:

Originally Posted by Anima123

Using recent mpc-be builds (till 4455, didn't test latest), the progress bar will not appear for a while after starting playback the video, and certainly not be able to enter full-screen mode by Alt-Enter.

Just tried the latest nightly and found the problem has gone. Thanks a lot!

mkver · 24th March 2019, 11:42

Quote:

Originally Posted by Aleksoid1978

Thanks - fixed.

Works fine in 4466. Thanks.

11th March 2019, 11:05	#6110 \| Link
Aleksoid1978 Registered User Join Date: Apr 2008 Location: Russia, Vladivostok Posts: 2,504	Dual audio not working for bitstreaming + PCM output. Only bitstream or PCM __________________ I7 2600K@4.2 /Asrock P67 Extreme4 Gen 3 /Kingston HyperX 8Gb 1866 (4x2) Kit /OCZ Vertex 3 256Gb /GTX 1650 /Samsung U28R550UQI /LG 47LM620T /Yamaha RX-V471 + NS-555 + NS-C444 + NS-333 + YST-SW215

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11th March 2019, 10:20	#6106 \| Link
Grimsdyke Registered User Join Date: Nov 2013 Location: Hannover, Germany Posts: 182	I love the dual-audio out feature of BE !! But unfortunately I do need much more gain on HDMI (=> connected to TV) than on 5.1-Analog (=> connected to Amplifier). Would it be possible to add a second slider so that gain could be adjusted independently ?

11th March 2019, 10:50	#6109 \| Link
Grimsdyke Registered User Join Date: Nov 2013 Location: Hannover, Germany Posts: 182	@Aleksoid. I mean: Options -> Audio -> Sound Processing -> Volume Control -> GAIN. Would need one slider for each audio out. @Manni. Thanx, I will check that.

11th March 2019, 11:18	#6111 \| Link
Grimsdyke Registered User Join Date: Nov 2013 Location: Hannover, Germany Posts: 182	Bitstreaming over HDMI seem to be not louder on my equipment.

22nd March 2019, 00:33	#6113 \| Link
beter Registered User Join Date: Aug 2013 Posts: 155	Update for translation of Chinese traditional and Dutch https://www.sendspace.com/file/x1lt1i

22nd March 2019, 03:36	#6114 \| Link
Anima123 Registered User Join Date: Jun 2005 Posts: 481	Using recent mpc-be builds (till 4455, didn't test latest), the progress bar will not appear for a while after starting playback the video, and certainly not be able to enter full-screen mode by Alt-Enter.

22nd March 2019, 21:44	#6115 \| Link
mkver Registered User Join Date: May 2016 Posts: 197	DVBSUB subtitles are usually displayed until the next subtitle packet (often an empty subtitle that just says "Stop displaying the previous subtitles") is due for display. If a file does not contain these end-of-display subtitles, MPC-BE crashes. Such files can be produced by e.g. splitting files with mkvmerge. It doesn't seem to matter whether the DVBSUB packet (in Matroska) is in a SimpleBlock or a BlockGroup with an explicit nonzero duration or a BlockGroup with a zero duration. Here, here and here are samples for this. I can sometimes produce crashes if I am near the end of a transport stream with DVBSUBs as active subtitles, so this doesn't seem to be limited to Matroska, although it is not so easy to reproduce the crash there. (If a DVBSUB in a BlockGroup has a nonzero duration, then actually this should be used as the duration; it should override the duration implied by the next subtitle packet. (The reason I am treating a BlockGroup with a zero duration specially is that FFmpeg has a bug in that it writes duration zero if the duration is unknown.))

23rd March 2019, 10:13	#6116 \| Link
Arm3nian Registered User Join Date: Jul 2014 Location: Las Vegas Posts: 177	If I seek before a file starts to play initially, MPC-BE stops responding. Same if I seek a second time too quickly after the first one. Turning off wait for render queue in madVR makes it better, but it still crashes. This has been happening ever since the UI change. I've tried nightlies of MPC-BE and LAV for a month but it does the same thing. Also, before the UI change, if I had 2 screens connected, and I switched the file to fullscreen, and pulled the display plug on one of them, it would automatically continue playing on the other display. Doesn't do that anymore.