madVR - high quality video renderer (GPU assisted) - Page 3052

Asmodian · 16th December 2020, 03:01

I think the CX fixed PC mode in general, not just with HDMI 2.1. It is a lot better than it was on my C9, especially significant with HDR, but it is still better with SDR.

HDMI 2.1 allows YCbCr 444 at 10 bit and high refresh rates but I would still send a CX 8 bit YCbCr 444 limited at 60 Hz with HDMI 2.0b. I would have madVR dither to 8 bit even when sending 10 bit YCbCr 444 to the display, it really helps with banding. These OLEDs still need all the help they can get with banding if you get picky about test patterns.

Please do run your own tests for banding, I would love more data points for the CX testing RGB full v.s. YCbCr 444 limited in PC mode. I am fairly confident in my own testing but that doesn't mean I am actually correct.
SDR gradient tests (use with madVR).
gradient-perceptual-v2.1_24fps.mkv
gradient-perceptual-colored-v2.1_24fps.mkv

sofakng · 16th December 2020, 17:04

I'm using an Acer X34 (3440x1440, ultrawide) monitor that I'd like to use play UHD HDR movies on. It doesn't support HDR but if I understand correctly, I can use madVR for tone-mapping.

Is it worth purchasing Calman for calibration?

I have a i1 Display Pro meter that I haven't used in many years but I also just purchased an LG CX OLED. I was thinking about buying the latest Calman (home version with LG autocal) to calibrate the LG CX, Acer X34, and my LG 27" HDR PC monitors.

HillieSan · 16th December 2020, 19:18

I have ordered a RTX 3060 Ti. It is going to replace my RX 480.

Currently I run a GTX 1080 in my HTPC which runs pretty good with madvr. The RTX has 2x HDMI 2.1 and VP9/VP11/AV1 decoders which seems to be a better choice in my HTPC, don't you think?

VBB · 16th December 2020, 19:19

@sofakng - Check out the calibration section over at AVS https://www.avsforum.com/forums/disp...libration.139/

There is a thread for CalMAN for LG and also threads for each year's OLED model. I would get myself familiar with everything before purchasing the software.

chros · 16th December 2020, 20:18

Quote:

Originally Posted by HillieSan

The RTX has 2x HDMI 2.1 and VP9/VP11/AV1 decoders

2 HDMi? Which brand/model is that and how much?

HillieSan · 16th December 2020, 20:24

https://www.gigabyte.com/Graphics-Ca...E-OC-8GD/sp#sp

QBhd · 16th December 2020, 20:32

2 HDMI was one of the selling points for me when I got my Sapphire Nitro+ 5700XT... that and the insanely easy to replace fans

QB

huhn · 16th December 2020, 21:15

there are quite a number of cards with 2 hdmi.

QBhd · 16th December 2020, 21:19

Indeed, but it is not very common anymore.

QB

huhn · 16th December 2020, 21:47

i can find 4-5 for "every" category.

Manni · 16th December 2020, 22:27

Quote:

Originally Posted by chros

2 HDMi? Which brand/model is that and how much?

ASUS and a few others have 2 HDMI out. At least the 3080/3090.

jesped · 17th December 2020, 05:54

Hi, total noob here trying madVR in Potplayer.

Once starting to play a video, a red border appears after a few seconds... what does that mean?

Edit: Mmmm... it seems it was an avisynth script leftover from SVP. Weird that it only shows that red border when using MadVR...

nevcairiel · 17th December 2020, 11:52

Quote:

Originally Posted by chros

2 HDMi? Which brand/model is that and how much?

Even if the price and shop references don't make much sense for someone outside of the EU (or even Germany, where this site is the strongest), their filtering for features is awesome to find products that suit your needs.

For example, 3060 Tis with dual HDMI:
https://geizhals.eu/?cat=gra16_512&x...+-+RTX+3060+Ti

The only issue right now is that they sometimes don't list products that have no reseller at all, which currently happens with many graphics cards that are perpetually out of stock...

xton · 17th December 2020, 18:55

I have a problem and see if someone can find an explanation. I am with madVR (v114) and nvidia gtx1080 card and for a while (before it did not) when I try to watch a movie in 3D format, if the cursor is on the display screen, the 3D does not work and the screen blinks all the time while ... I have to move the cursor to one end of the screen and put it on top of the windows status bar so that the 3D works perfectly. I use the latest version of nvidia that allows 3D viewing, so I don't know where the problem may be (I display 2:35 on screen with JVC RS400 projector). Many thanks

Michael2907 · 18th December 2020, 08:52

Simeone with a JVC n7 here?

Gesendet von meinem SM-N960F mit Tapatalk

nightrhyme · 19th December 2020, 00:46

Panasonic hz2000. Madvr on some hdr files disables Â“intelligent frame creationÂ” an option in the TVs settings. IÂ’m sure itÂ’s some simple setting in madvr but canÂ’t find it. ItÂ’s probably highly unlikely anybody know the solution. But itÂ’s worth a try. Going crazy
Mpc hc and madvr. Gtx 1060 win10. Files are 4K hevc dts hdr mkv

nightrhyme · 19th December 2020, 00:51

Quote:

Originally Posted by nightrhyme

Panasonic hz2000. Madvr on some hdr files disables Â“intelligent frame creationÂ” an option in the TVs settings. IÂ’m sure itÂ’s some simple setting in madvr but canÂ’t find it. ItÂ’s probably highly unlikely anybody know the solution. But itÂ’s worth a try. Going crazy
Mpc hc and madvr. Gtx 1060 win10. Files are 4K hevc dts hdr mkv

When playing file in Windowed mode setting are not disabled

VBB · 19th December 2020, 01:18

Are the refresh rates different between full screen and windowed? Is it possible that Pure Direct is enabled for 24Hz, and that's causing interpolation to be disabled?

nightrhyme · 19th December 2020, 01:29

Quote:

Originally Posted by VBB

Are the refresh rates different between full screen and windowed? Is it possible that Pure Direct is enabled for 24Hz, and that's causing interpolation to be disabled?

Thank you for reply
No the refresh rate is locked at 24 hz always.
The tv shows exact display res and refresh

Pure direct is it at setting in madvr ?

huhn · 19th December 2020, 01:41

no madVR can't do that but the GPU driver can.

i don'T have an nvidia card at hand and AFAIK it's not changeable on AMD.

16th December 2020, 03:01	#61021 \| Link
Asmodian Registered User Join Date: Feb 2002 Location: San Jose, California Posts: 4,407	I think the CX fixed PC mode in general, not just with HDMI 2.1. It is a lot better than it was on my C9, especially significant with HDR, but it is still better with SDR. HDMI 2.1 allows YCbCr 444 at 10 bit and high refresh rates but I would still send a CX 8 bit YCbCr 444 limited at 60 Hz with HDMI 2.0b. I would have madVR dither to 8 bit even when sending 10 bit YCbCr 444 to the display, it really helps with banding. These OLEDs still need all the help they can get with banding if you get picky about test patterns. Please do run your own tests for banding, I would love more data points for the CX testing RGB full v.s. YCbCr 444 limited in PC mode. I am fairly confident in my own testing but that doesn't mean I am actually correct. SDR gradient tests (use with madVR). gradient-perceptual-v2.1_24fps.mkv gradient-perceptual-colored-v2.1_24fps.mkv __________________ madVR options explained

16th December 2020, 19:19	#61024 \| Link
VBB Registered User Join Date: May 2016 Location: Long Beach, CA, USA Posts: 620	@sofakng - Check out the calibration section over at AVS https://www.avsforum.com/forums/disp...libration.139/ There is a thread for CalMAN for LG and also threads for each year's OLED model. I would get myself familiar with everything before purchasing the software. __________________ Henry \| LG OLED65C7P \| Denon AVR-X3500H \| ELAC Uni-Fi x7 \| ELAC Debut 2.0 SUB3030 x2 \| NVIDIA SHIELD TV Pro 2019 \| Plex

16th December 2020, 20:32	#61027 \| Link
QBhd QB the Slayer Join Date: Feb 2011 Location: Toronto Posts: 697	2 HDMI was one of the selling points for me when I got my Sapphire Nitro+ 5700XT... that and the insanely easy to replace fans QB __________________

16th December 2020, 21:19	#61029 \| Link
QBhd QB the Slayer Join Date: Feb 2011 Location: Toronto Posts: 697	Indeed, but it is not very common anymore. QB __________________

17th December 2020, 05:54	#61032 \| Link
jesped Registered User Join Date: Feb 2006 Posts: 3	Hi, total noob here trying madVR in Potplayer. Once starting to play a video, a red border appears after a few seconds... what does that mean? Edit: Mmmm... it seems it was an avisynth script leftover from SVP. Weird that it only shows that red border when using MadVR... Last edited by jesped; 17th December 2020 at 20:51. Reason: More info

16th December 2020, 17:04	#61022 \| Link
sofakng Registered User Join Date: May 2007 Posts: 54	I'm using an Acer X34 (3440x1440, ultrawide) monitor that I'd like to use play UHD HDR movies on. It doesn't support HDR but if I understand correctly, I can use madVR for tone-mapping. Is it worth purchasing Calman for calibration? I have a i1 Display Pro meter that I haven't used in many years but I also just purchased an LG CX OLED. I was thinking about buying the latest Calman (home version with LG autocal) to calibrate the LG CX, Acer X34, and my LG 27" HDR PC monitors.

16th December 2020, 19:18	#61023 \| Link
HillieSan Registered User Join Date: Sep 2016 Posts: 176	I have ordered a RTX 3060 Ti. It is going to replace my RX 480. Currently I run a GTX 1080 in my HTPC which runs pretty good with madvr. The RTX has 2x HDMI 2.1 and VP9/VP11/AV1 decoders which seems to be a better choice in my HTPC, don't you think?

16th December 2020, 20:24	#61026 \| Link
HillieSan Registered User Join Date: Sep 2016 Posts: 176	https://www.gigabyte.com/Graphics-Ca...E-OC-8GD/sp#sp

16th December 2020, 21:15	#61028 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,922	there are quite a number of cards with 2 hdmi.

16th December 2020, 21:47	#61030 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,922	i can find 4-5 for "every" category.

17th December 2020, 18:55	#61034 \| Link
xton Registered User Join Date: Dec 2020 Location: Majorca Island Posts: 1	I have a problem and see if someone can find an explanation. I am with madVR (v114) and nvidia gtx1080 card and for a while (before it did not) when I try to watch a movie in 3D format, if the cursor is on the display screen, the 3D does not work and the screen blinks all the time while ... I have to move the cursor to one end of the screen and put it on top of the windows status bar so that the 3D works perfectly. I use the latest version of nvidia that allows 3D viewing, so I don't know where the problem may be (I display 2:35 on screen with JVC RS400 projector). Many thanks

18th December 2020, 08:52	#61035 \| Link
Michael2907 Registered User Join Date: Jun 2019 Posts: 8	Simeone with a JVC n7 here? Gesendet von meinem SM-N960F mit Tapatalk

19th December 2020, 00:46	#61036 \| Link
nightrhyme º¿º XviD N00B º¿º Join Date: Apr 2004 Posts: 231	Panasonic hz2000. Madvr on some hdr files disables Â“intelligent frame creationÂ” an option in the TVs settings. IÂ’m sure itÂ’s some simple setting in madvr but canÂ’t find it. ItÂ’s probably highly unlikely anybody know the solution. But itÂ’s worth a try. Going crazy Mpc hc and madvr. Gtx 1060 win10. Files are 4K hevc dts hdr mkv __________________ "We are all Newbies at something" -- NightRhyme

19th December 2020, 01:18	#61038 \| Link
VBB Registered User Join Date: May 2016 Location: Long Beach, CA, USA Posts: 620	Are the refresh rates different between full screen and windowed? Is it possible that Pure Direct is enabled for 24Hz, and that's causing interpolation to be disabled? __________________ Henry \| LG OLED65C7P \| Denon AVR-X3500H \| ELAC Uni-Fi x7 \| ELAC Debut 2.0 SUB3030 x2 \| NVIDIA SHIELD TV Pro 2019 \| Plex

19th December 2020, 01:41	#61040 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,922	no madVR can't do that but the GPU driver can. i don'T have an nvidia card at hand and AFAIK it's not changeable on AMD.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode