BD Rebuilder Beta - Bug Reports Only

[jdobbs]

Originally Posted by Marban

i set the ini to

OUTPUT_3D_ISO=1		n = 0/1 - 1=ON (default) - if set to "0", output is to a folder rather than ISO

and rebuild with "movie only" but nothing has chanced.

so i use better 2 Steps for a 3D ISO. BD Rebuilder and mux the m2ts to a 3D ISO with tsMuxer.

thanks for help.

It works. There are lots of people using it. I have done dozens of discs using it myself. You're doing something wrong.

I notice it looks like you've edited the HIDDENOPTS.TXT file. That's just a document -- if you're changing it there it has no effect. You have to edit the file called BDREBUILDER.INI in the BD Rebuilder folder.

[jdobbs]

Originally Posted by Marban

this ist my ini and i set OUTPUT_3D_ISO=1

That isn't the INI file, that's only a document of available hidden options. Read my last post right above this one.

Here is the first line in the file you posted:

This file contains descriptions of settings that can be added to the BDREBUILDER.INI file

[AmigaFuture]

Originally Posted by jdobbs

I don't think I have "Cloud Atlas", but I'll look. No I haven't been able to repeat it -- and frankly I'm puzzled as to how it is even possible.

I'mmmmm trying to figure it also. Thus far it's the ONLY movie that's doing it. I'll rerip it...possible the first bad rip in a while. I did notice that it does it with either of the 3 Subtitles. I'll also check AnyDVD HD to see if there's a bug fix..?

[gonca]

@jdobbs
@AmigaFuture

I'm running a backup of Cloud Atlas using the Alternate Settings to see if the problem occurs on my system.

[gonca]

Can confirm the issue. PGS in VID 0058 only have one entry each, looks like a language identifier. I.E. [ENGLISH] according to BDSup2Sub

[Marban]

now i understand you, thanks
any important settings for the best Quality? i use very slow, normal Priority and open GOPs for encoding.

[AmigaFuture]

Originally Posted by gonca

@jdobbs
@AmigaFuture

I'm running a backup of Cloud Atlas using the Alternate Settings to see if the problem occurs on my system.

Can confirm the issue. PGS in VID 0058 only have one entry each, looks like a language identifier. I.E. [ENGLISH] according to BDSup2Sub.

I updated AnyDVD program. I just reripped it, made a BD-50 (no reencode)..and used that to make an Alternate MKV output. Looks good. I'll now check it direct from the direct rip before processing with BD-RB 47.05, and if that functions (as I'm confident it will..) then AnyDVD HD was it. I'll modify this message soon.

[jdobbs]

Originally Posted by gonca

@jdobbs
@AmigaFuture

I'm running a backup of Cloud Atlas using the Alternate Settings to see if the problem occurs on my system.

Originally Posted by gonca

Can confirm the issue. PGS in VID 0058 only have one entry each, looks like a language identifier. I.E. [ENGLISH] according to BDSup2Sub

I'll run "Cloud Atlas" with ALTERNATE settings tomorrow and see what gives...

[AmigaFuture]

Since you replied...I'll share this finding. The new BD-RB MKV from AnyDVD HD has the same challenge as I posted before. The other, processed by BD-RB is showing chapters and film time correct. Odd! I don't know enough of what you do, JDobbs, to...explain that. Nice to know I found a work-around for myself..hehe. More testing..

[jdobbs]

Originally Posted by AmigaFuture

Since you replied...I'll share this finding. The new BD-RB MKV from AnyDVD HD has the same challenge as I posted before. The other, processed by BD-RB is showing chapters and film time correct. Odd! I don't know enough of what you do, JDobbs, to...explain that. Nice to know I found a work-around for myself..hehe. More testing..

I don't understand what you're saying. You did it twice and one works while the other doesn't?

I did my disc with no issues -- but it doesn't appear to be the same version as yours.

[Acerjen]

Has anyone tried Pacific Rim 3D? I tried encoding it to a BD25 and the picture is excellent. But at the 1:06:16 mark, the picture jumps ahead about 8-10 seconds and the audio stays the same, so the rest of the movie is out of sync. I do not know if this is a BD Rebuilder problem or a FRIM Encoder problem. I was curious if anyone else has tried this movie, and if so, what were your results? I do have the ini and other info I can post if needed. I did re-rip my disc and the problem occurs with the new rip as well. I do not believe my drive is bad, as I ripped other discs before and after this one and they successfully converted.

Any help or insight is greatly appreciated. Thanks.

Acerjen

[setarip_old]

@Acerjen

Hi!

If you read through this thead, you'll note that specific problem (halted video while audio has continued) has occurred with a fair amount of discs (2D as well as 3D).

I'd suggest that you once againg attempt to scrupulously clean your disc. If the problem persists, return it to the place of purchase for a new replacement disc...

[Sharc]

Originally Posted by Acerjen

Has anyone tried Pacific Rim 3D? I tried encoding it to a BD25 and the picture is excellent. But at the 1:06:16 mark, the picture jumps ahead about 8-10 seconds and the audio stays the same, so the rest of the movie is out of sync. I do not know if this is a BD Rebuilder problem or a FRIM Encoder problem. I was curious if anyone else has tried this movie, and if so, what were your results? I do have the ini and other info I can post if needed. I did re-rip my disc and the problem occurs with the new rip as well. I do not believe my drive is bad, as I ripped other discs before and after this one and they successfully converted.

Any help or insight is greatly appreciated. Thanks.

Acerjen

As Setarip wrote, there have been issues with Pacific Rim. It seems to be a hopeless case......
See for example the discussion here.

[kabster]

Originally Posted by Acerjen

Has anyone tried Pacific Rim 3D?
Acerjen

me... it should play nice in sync from start to finish ... unless your PR_3D rip is not a region B !!

I can't vouch/ be certain for other regions... !!

about the A/V playing out of sync, i have re-done all my movies because of that ↑ nuicance by using x264 internal LaVf as frame server .. and .. voila nomore A/V synch problems... that easy..

You might wanna try that too !!

P.S: tested many BD-25 (panasonic japan import 4x burned @6x using pioneer BDR-208EBK BDXL) in different stand alones like the ps3, philips BDP-3480 with 0,00% issues

Even BD-R brand Mediarange (midcode: LEGBRAS006) 6x certified , capable of writing them @10x with my pioneer do play very VERY NICE

succes,

[AmigaFuture]

Originally Posted by jdobbs

I don't understand what you're saying. You did it twice and one works while the other doesn't?

I did my disc with no issues -- but it doesn't appear to be the same version as yours.

Not exactly. If have BD-RB process the rip to MKV Intact video and DTS to AC3, then the chapters and movie length show as 5 plus hours.
If I process the rip with BD-RB, in this case removing the stuff I don't want, to a BD-50 then use that output BD structure to create the MKV the the chapters and film time are as they should be. Why? I don't yet understand.

Do you follow now? If not, I'll type the steps? Let me know.

Mine comes from Amazon. Combo Pack; Blu-ray, DVD and Ultraviolet.

[jdobbs]

Originally Posted by Sharc

As Setarip wrote, there have been issues with Pacific Rim. It seems to be a hopeless case......
See for example the discussion here.

I guess I'm going to have to get that one for testing... just, please, assure me there is really an issue that can be repeated. I've been buying a lot of discs lately based on bug reports only to find they work fine... (Nurse 3D comes to mind). These 3D discs aren't cheap.

[Edit] I ordered it and should get it Thursday. It wasn't too bad, $18.

[AmigaFuture]

I'm trying "Cloud Atlas" from an almost stock INI and direct from rip. Maybe something in the settings is causing it? Testing now..

Edit 1: Hm...still same result. I'm removing ENABLE_TEST=1...as it was the only change I made. Should not affect it but will check. Doing test.

[Sharc]

Originally Posted by jdobbs

I guess I'm going to have to get that one for testing... just, please, assure me there is really an issue that can be repeated. I've been buying a lot of discs lately based on bug reports only to find they work fine... (Nurse 3D comes to mind). These 3D discs aren't cheap.

[Edit] I ordered it and should get it Thursday. It wasn't too bad, $18.

The issue I was referring to was with the (SW) decoding of Pacific Rim 3D. Both DGMVCDecode and FRIM (both based on the same Intel library) produced a couple of reproducible short glitches as reported by a number of testers. The root cause of these glitches was never found, and the disc has eventually been put aside as an exceptional case as far as I remember.
I didn't retry since. It is definitely not a BD-RB problem, it is a stream or decoder pecularity.

[jdobbs]

Originally Posted by Sharc

The issue I was referring to was with the (SW) decoding of Pacific Rim 3D. Both DGMVCDecode and FRIM (both based on the same Intel library) produced a couple of reproducible short glitches as reported by a number of testers. The root cause of these glitches was never found, and the disc has eventually been put aside as an exceptional case as far as I remember.
I didn't retry since. It is definitely not a BD-RB problem, it is a stream or decoder pecularity.

Thanks. I think it might be a good exercise to look at it and see if I can find anything. You never know, the sun even shines on a dog's butt sometimes.

[Guest]

If you want to save buying the disk we can give you the stream fragment that fails.