Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
10th January 2019, 19:23 | #1 | Link |
Registered User
Join Date: Jan 2015
Location: Somewhere... you guess !!!
Posts: 14
|
How to fix DTS HD-Master to DTS conversion ?
Hi everybody, I hope you doing well
I just extracted a 4.2 go DTS HD Master sound from a movie and I tried to convert that sound to DTS with EAC3toGui and with eac3to but the two softwares gave me an offset sound (-2.5 seconds). The movie has a duration of 2h24m19s, but after convertion I found that the sound has 2h22m34s, same result with both EAC3to. What I have to do to fix this & to obtain the same duration as result ? Thank you. |
10th January 2019, 19:38 | #2 | Link |
Life's clearer in 4K UHD
Join Date: Jun 2003
Location: Notts, UK
Posts: 12,227
|
Are you attempting to extract the DTS core from the DTS-HD MA stream?
__________________
| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 | My Network Layout & A/V Gear |
|
11th January 2019, 23:24 | #4 | Link |
Moderator
Join Date: Feb 2005
Location: Spain
Posts: 6,915
|
Then the DTS-MA is corrupt.
Is not possible different duration for DTS-MA and the core. Please show how do you obtain the core with eac3to (forget the obsolete EAC3toGui)
__________________
BeHappy, AviSynth audio transcoder. |
17th January 2019, 19:35 | #5 | Link |
Registered User
Join Date: Jan 2015
Location: Somewhere... you guess !!!
Posts: 14
|
Ok,
With eac3to I proceed like that-------- Source---Add source file-----eac3t audio-----Input file(s) or Folder (choose my file)-----Save As Type (DTS or AC3)-----File Name (without forgetting the DTS bitrate or AC3 bitrate, choose the Hz (for me 48000 Hz) After that I go to Downmixing & choose "Downmix 7-8 Channels to 6 Channels. Misc with "Extract the Core of DTS HD or 7.1 Track" Run Command Line. I almost forgot Paths for ( Eac3to-MKVMerge-TsMuxer-NeroAACEnc ) About EAC3to Conversion Utility ------Source File-------Destination File (without forgetting the extension at the end)--------Conversion Options 1------------DTS just below Check Extract DTS Core----------Downmix options--------Downmix to 6 ch-------Convert I wait until the end of the conversion, if there is a problem just tell me. Thank you. |
18th January 2019, 01:23 | #6 | Link | ||
Moderator
Join Date: Feb 2005
Location: Spain
Posts: 6,915
|
Quote:
I don't know how use that GUI to extract the core from a DTS-HD I can't help you with that old GUI. Quote:
Work fine for me extracting the core from a dts-hd. The core is already 5.1, you don't need the Downmix part.
__________________
BeHappy, AviSynth audio transcoder. |
||
18th January 2019, 12:46 | #7 | Link |
Life's clearer in 4K UHD
Join Date: Jun 2003
Location: Notts, UK
Posts: 12,227
|
It might be possible to use good 'ol fashioned TSmuxerGUI to extract the 'core' from media files that contain lossless HD audio...
__________________
| I've been testing hardware media playback devices and software A/V encoders and decoders since 2001 | My Network Layout & A/V Gear |
|
5th February 2019, 15:37 | #9 | Link | |
Registered User
Join Date: Jan 2015
Location: Somewhere... you guess !!!
Posts: 14
|
Quote:
Last edited by moutezz; 6th February 2019 at 15:34. |
|
Tags |
ac3, dts, dts-hd ma, eac3to |
|
|