BD Rebuilder Beta - Bug Reports Only - Page 718

colinhunt · 10th February 2012, 10:42

Quote:

Originally Posted by neuron2

DGDecNV uses the VP engine, not the graphics (GPU) core.

Well, no wonder then

NightHawkGuy · 10th February 2012, 11:58

Quote:

Originally Posted by KiwiKid

I'm guessing the Header stripping listed under Muxing mode in MediaInfo is the problem.

Some playback devices have a problem with MKV header compression.
I noticed the version of mkvmerge was changed in the recent BD-Rebuilder releases.
The older mkvmerge version with v0.39.07 may not have output MKVs with header compression.
Its best to have MKV header compression disabled for most compatability - in the GUI version of mkvmerge this can be set as the default.

varekai · 10th February 2012, 12:18

@neuron2

Can't get DGDecNV to work with BDRB?
After Extracting A/V Streams nothing happens?
Tried to figure out what's going on and doubledchecked license info and that peculiar line feed but nothing worked.
Finally found that the machine ID doesn't match?
What's that about?

Edit:
Just found out that if I go online DGDecNV works?!?
Is that it? I have to be connected to the web?
When I go offline the machine ID changes and DGDecNV/BDRB won't work!?

regards

jdobbs · 10th February 2012, 15:15

Quote:

Originally Posted by KiwiKid

I'm guessing the Header stripping listed under Muxing mode in MediaInfo is the problem. It is a quick fix with MkvMerge.

Instructions at this link

http://www.noblemd.info/index.php?op...d=21&Itemid=24

I think you're right. The newer versions of MKVMERGE changed the default -- I just noticed that I added "--compression 0:none" to all but one internal command line. That setting is the only one that can be guaranteed to work with all players. That's almost surely the problem. I'll correct that line and post an interim update.

I had to update the MKVMERGE version so I can add .SUP subtitle support.

Mark_Venture · 10th February 2012, 16:43

Quote:

Originally Posted by KiwiKid

I'm guessing the Header stripping listed under Muxing mode in MediaInfo is the problem. It is a quick fix with MkvMerge.

Instructions at this link

http://www.noblemd.info/index.php?op...d=21&Itemid=24

Thank you, those steps worked.

The copy made with 0.40.4, then I used those steps, is now playable.

soneca · 10th February 2012, 17:30

jdobbs,

"--compression 0:none" or "--compression -1:none"?

jdobbs · 10th February 2012, 18:06

Quote:

Originally Posted by soneca

jdobbs,

"--compression 0:none" or "--compression -1:none"?

That just depends on how you are using the command line. In my case it is "0:none" -- in another it might be "-1:none".

rendez2k · 10th February 2012, 19:27

Just donated for DGDecNV. Is there anyway for bdrb to record in the log the average FPS and time/speed etc for comparison?

soneca · 10th February 2012, 19:46

Quote:

Originally Posted by jdobbs

That just depends on how you are using the command line. In my case it is "0:none" -- in another it might be "-1:none".

Ok.

LowDead · 10th February 2012, 20:16

Quote:

Originally Posted by jdobbs

Does it run if you turn MULTIPROCESS off? That would at least tell for sure if it was the split.

I also reinstalled 4002 to verify.

4002=Works perfectly splitting
4004=Fail to split. Errors out directly. Works when using MULTIPROCESS=0

//LD

jdobbs · 10th February 2012, 21:21

Quote:

Originally Posted by LowDead

I also reinstalled 4002 to verify.

4002=Works perfectly splitting
4004=Fail to split. Errors out directly. Works when using MULTIPROCESS=0

//LD

I can't figure out why it is doing it on your encode but there are no other reports... I've done several more encodes since your post -- and still no problem.

NightHawkGuy · 10th February 2012, 22:11

Quote:

Originally Posted by jdobbs

I had to update the MKVMERGE version so I can add .SUP subtitle support.

Is there a hidden option to include the subtitles in the output mkv file?

Farscape1 · 10th February 2012, 22:41

Quote:

Originally Posted by KiwiKid

I'm guessing the Header stripping listed under Muxing mode in MediaInfo is the problem. It is a quick fix with MkvMerge.

Instructions at this link

http://www.noblemd.info/index.php?op...d=21&Itemid=24

you can have header stripping turned off permanently:

1. file>options
2. under "mmg" tab, make sure "disable header removal compression for audio and video tracks by default" is checked (v5.3.0 but also was an option in 4.8....not sure about earlier versions)

jdobbs · 10th February 2012, 23:05

Quote:

Originally Posted by NightHawkGuy

Is there a hidden option to include the subtitles in the output mkv file?

Not yet. That is just a little forward planning.

LowDead · 10th February 2012, 23:14

Quote:

Originally Posted by jdobbs

I can't figure out why it is doing it on your encode but there are no other reports... I've done several more encodes since your post -- and still no problem.

I don't understand it either.. with no other reports it has to be something with my system, but what? O_o

/LD

jdobbs · 10th February 2012, 23:27

Quote:

Originally Posted by LowDead

I don't understand it either.. with no other reports it has to be something with my system, but what? O_o

/LD

I don't think so... it has to be BD-RB's splitting -- but I can't figure what is different in this case. I'd like to figure it out and put in a fix (as well as the issue reported by The_Unknown) before I post another interim release.

LowDead · 10th February 2012, 23:37

Quote:

Originally Posted by jdobbs

I don't think so... it has to be BD-RB's splitting -- but I can't figure what is different in this case. I'd like to figure it out and put in a fix (as well as the issue reported by The_Unknown) before I post another interim release.

Please let me now if you need some more testing from me.

//LD

AmigaFuture · 11th February 2012, 01:15

I'm not sure what's up with MULTIPROCESS, as I'm noticing it's not working well with 40.04. I've noticed as LowDead that something isn't functional as it was. I was going to post to please reactive MULTIPROCESS as 0, 1, 2 or 3 aren't working with my machine anymore.

I also noticed something else, I went back to...40.01 for testing, and when I had reported the video glitch (The Matrix - Revolutions), I didn't notice that BD-RB reported it as VC-1 before or not. So I ripped it again, and tried it with 40.01, and this time I saw VC-1 and MULTIPROCESS=1 showed BD-RB was indeed splitting it. Which could be why the glitch was there...as in your website says it shouldn't work with VC-1. Now, with 40.04 even AVC's, here, with MUTLTIPROCESS 0, 1, 2, or 3 set aren't functioning. I am noticing 1st pass starts with HIGH (98) FPS and slowly it drops to 40 something FPS or lower. I haven't let it go to 2nd pass yet.

The changes were made using View/Edit Config and NOT exiting the program for the info above.

Code:

[19:37:57] BD Rebuilder v0.40.01 (beta)
  - Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[19:37:58] PHASE ONE, Encoding
 - [19:37:58] Processing: VID_00020 (1 of 1)
 - [19:37:58] Extracting A/V streams [VID_00020]
 - [19:43:04] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 11,261 Kbs
 - [19:43:04] Reencoding: VID_00020, Pass 1 of 2
[20:00:37]PHASE ONE aborted by user request
-----------------------
[20:00:49] BD Rebuilder v0.40.01 (beta)
  - Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[20:00:52] PHASE ONE, Encoding
 - [20:00:52] Processing: VID_00020 (1 of 1)
 - [20:00:52] Extracting A/V streams [VID_00020]
 - [20:06:02] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 11,261 Kbs
 - [20:06:02] Reencoding: VID_00020, Pass 1 of 2
 - [21:11:05] Reencoding: VID_00020, Pass 2 of 2
 - [23:42:52] Video Encode complete
 - [23:42:52] Processing audio tracks
 - [23:42:52] Multiplexing M2TS
[23:42:52]PHASE ONE complete
[23:42:52]PHASE TWO - Rebuild Started
 - [23:42:52] Rebuilding stream 00020 [1 of 1]
 - [23:42:52] Building ALTERNATE OUTPUT Structure
[23:50:34] - Encode and Rebuild complete
[23:50:34] JOB: ASSAULTONPRECINCT13 finished.
----------------------
[02/10/12] BD Rebuilder v0.40.04 (beta)
[10:45:42] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow [3-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[10:45:43] PHASE ONE, Encoding
 - [10:45:43] Processing: VID_00020 (1 of 1)
 - [10:45:43] Extracting A/V streams [VID_00020]
 - [10:50:41] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [10:50:41] Reencoding: VID_00020, Pass 1 of 2
 - [11:47:59] Reencoding: VID_00020, Pass 2 of 2
[12:16:07]PHASE ONE aborted by user request
----------------------
[02/10/12] BD Rebuilder v0.40.04 (beta)
[12:16:35] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow [3-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[12:16:37] PHASE ONE, Encoding
 - [12:16:37] Processing: VID_00020 (1 of 1)
 - [12:16:37] Extracting A/V streams [VID_00020]
 - [12:21:32] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [12:21:32] Reencoding: VID_00020, Pass 1 of 2
[12:22:24]PHASE ONE aborted by user request
----------------------
[02/10/12] BD Rebuilder v0.40.04 (beta)
[12:22:44] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow [2-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[12:22:46] PHASE ONE, Encoding
 - [12:22:46] Processing: VID_00020 (1 of 1)
 - [12:22:46] Extracting A/V streams [VID_00020]
 - [12:27:48] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [12:27:48] Reencoding: VID_00020, Pass 1 of 2
[12:28:00]PHASE ONE aborted by user request
----------------------
[02/10/12] BD Rebuilder v0.40.04 (beta)
[12:28:13] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[12:28:14] PHASE ONE, Encoding
 - [12:28:14] Processing: VID_00020 (1 of 1)
 - [12:28:14] Extracting A/V streams [VID_00020]
 - [12:33:18] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [12:33:18] Reencoding: VID_00020, Pass 1 of 2
[12:35:37]PHASE ONE aborted by user request
----------------------
[02/10/12] BD Rebuilder v0.40.04 (beta)
[12:36:16] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[12:36:19] PHASE ONE, Encoding
 - [12:36:19] Processing: VID_00020 (1 of 1)
 - [12:36:19] Extracting A/V streams [VID_00020]
   - Extracting A/V to M2TS [VID_00020]
   - Extracting A/V from M2TS [VID_00020]
 - Error in attempt to extract audio/subs.
 - 
 - Error in attempt to extract audio/subs.
 - 
[12:48:00] - Failed to retrieve audio, aborted

The previous log is because of disk space as to why it failed.

Now most recent test logs..

In this instance MP is set to 1. 3-way is set, looks like, and 1st pass atarts at 95 FPS and slowly drops to 40's but before doing so it climbs to 99. x264 is 1 instance and using 1GB of RAM.

Code:

[02/10/12] BD Rebuilder v0.40.04 (beta)
[13:05:53] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow [3-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[13:05:53] PHASE ONE, Encoding
 - [13:05:53] Processing: VID_00020 (1 of 1)
 - [13:05:53] Extracting A/V streams [VID_00020]
 - [13:10:52] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [13:10:52] Reencoding: VID_00020, Pass 1 of 2

I've now changed MP to 2. Exited, and re-run the program. Clicked to delete old files. x264 same stuff.

Code:

[02/10/12] BD Rebuilder v0.40.04 (beta)
[13:18:40] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow [2-way]
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[13:18:42] PHASE ONE, Encoding
 - [13:18:42] Processing: VID_00020 (1 of 1)
 - [13:18:42] Extracting A/V streams [VID_00020]
 - [13:23:50] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [13:23:50] Reencoding: VID_00020, Pass 1 of 2
[13:25:15]PHASE ONE aborted by user request

I changed MP to 0. Exited, re-ran program. Clicked to delete old files. Same RAM usage, and 1 instance of x264. Same scene as above except without DirectShow, as should be.

Code:

[02/10/12] BD Rebuilder v0.40.04 (beta)
[13:29:05] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[13:29:07] PHASE ONE, Encoding
 - [13:29:07] Processing: VID_00020 (1 of 1)
 - [13:29:07] Extracting A/V streams [VID_00020]
 - [13:34:07] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [13:34:07] Reencoding: VID_00020, Pass 1 of 2
[13:37:02]PHASE ONE aborted by user request

MP is now removed from the config. Exited program, and re-run.
----------------------

Code:

[02/10/12] BD Rebuilder v0.40.04 (beta)
[13:39:36] Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=448
[13:39:38] PHASE ONE, Encoding
 - [13:39:38] Processing: VID_00020 (1 of 1)
 - [13:39:38] Extracting A/V streams [VID_00020]
 - [13:44:38] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 5,675 Kbs
 - [13:44:38] Reencoding: VID_00020, Pass 1 of 2
[13:45:55]PHASE ONE aborted by user request

Now using MP=1 with 40.02. 3-was split is active. 3 processes of x264 are active. About 50MB RAM per x264. From the splitting process to seeing FPS was about 14 minutes. Holding around 53.xx FPS. After maybe 15 to 20 minutes I'm seeing 55-66.xx FPS. Finished at 51 minutes. This is all within the 1st pass.

2nd pass started. 3 processes of x264 using about 50MB+/- each for 14 minutes of processing before it shows FPS. Now ranges from 400 to 700MB each. It started at 40.xx FPS and has slowly dropped to 18.xx at 36% done. The process isn't done and I'll Watch the final result tonight.
-----------------------

Code:

[13:47:52] BD Rebuilder v0.40.02 (beta)
  - Source:  ASSAULTONPRECINCT13
  - Input BD size: 19.03 GB
  - Approximate total content: [01:30:49.444]
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
  - Mode: MKV Container, 1920x1080, Intact Audio
  - Automatic cropping of borders enabled
  - Audio Settings: AC3=0 DTS=1 HD=0 Kbs=640
[13:47:53] PHASE ONE, Encoding
 - [13:47:53] Processing: VID_00020 (1 of 1)
 - [13:47:53] Extracting A/V streams [VID_00020]
 - [13:52:52] Reencoding video [VID_00020]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 130,656 frames
   - Bitrate: 10,185 Kbs
 - [13:52:52] Reencoding: VID_00020, Pass 1 of 2
 - [14:51:14] Reencoding: VID_00020, Pass 2 of 2

NightHawkGuy · 11th February 2012, 01:25

Didn't the x264 version change between BD Rebuilder v0.40.01 thru v0.40.04?
Could that cause the difference in speed and amounts of RAM used by x264, noted above?

jdobbs · 11th February 2012, 01:58

Quote:

as in your website says it shouldn't work with VC-1.

Where did you get that? The only time it would not split VC-1 is if it is interlaced, which is very rare (virtually non-existent) for a feature -- and that wouldn't even matter with DGDecNV.

I'm telling you -- except for fixing the 00006 error, which isn't related to that, the code when using DirectshowSource is identical. I'll go back an check -- but I'm pretty sure that's true.

Maybe I'm dense, but as for your post... I read it about 5 times and I can't for the life of me figure out what you're trying to say. I also don't get the connection between what you are saying and LowDead's report. He's reporting an straight-forward error... and that doesn't sound anything like what you're posting.

Sticking with only the current version... please tell me what it is (or isn't) doing that you think it should (or should not) be doing???

10th February 2012, 12:18	#14343 \| Link
varekai Suspended for forum rule violations Join Date: Jul 2006 Posts: 528	@neuron2 Can't get DGDecNV to work with BDRB? After Extracting A/V Streams nothing happens? Tried to figure out what's going on and doubledchecked license info and that peculiar line feed but nothing worked. Finally found that the machine ID doesn't match? What's that about? Edit: Just found out that if I go online DGDecNV works?!? Is that it? I have to be connected to the web? When I go offline the machine ID changes and DGDecNV/BDRB won't work!? regards Last edited by varekai; 10th February 2012 at 15:55. Reason: more info added

10th February 2012, 19:27	#14348 \| Link
rendez2k Registered User Join Date: Jun 2003 Location: UK Posts: 625	Just donated for DGDecNV. Is there anyway for bdrb to record in the log the average FPS and time/speed etc for comparison? Last edited by rendez2k; 10th February 2012 at 22:11.

11th February 2012, 01:25	#14359 \| Link
NightHawkGuy Registered User Join Date: May 2011 Posts: 34	Didn't the x264 version change between BD Rebuilder v0.40.01 thru v0.40.04? Could that cause the difference in speed and amounts of RAM used by x264, noted above? Last edited by NightHawkGuy; 11th February 2012 at 02:08.

10th February 2012, 17:30	#14346 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	jdobbs, "--compression 0:none" or "--compression -1:none"?