BD Rebuilder Beta - Bug Reports Only - Page 959

soneca · 10th February 2014, 17:55

Sure, but it did not work, no resizing. .

Code:

[02/10/14] BD Rebuilder v0.46.11 (beta)
[11:35:01] Source:  CHRIS_ISAAK_00003
  - Input BD size: 14,99 GB
  - Approximate total content: [00:54:57.193]
  - Target BD size: 4,38 GB
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY mode enabled
  - RESIZE 1080p to 720p enabled
  - Quality: Highest (Very Slow), Two Pass
  - Output folder: E:\VIDEOS\
  - Decoding/Frame serving: DGDecNV [3-way]
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=448
[11:35:01] PHASE ONE, Encoding
 - [11:35:01] Processing: VID_00004 (1 of 1)
 - [11:35:01] Extracting A/V streams [VID_00004]
 - [11:37:27] Reencoding video [VID_00004]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 29,970fps, 98.817 frames
   - Bitrate: 10.097 Kbs
 - [11:37:27] Reencoding: VID_00004, Pass 1 of 2
 - [11:53:08] Reencoding: VID_00004, Pass 2 of 2
 - [13:21:55] Video Encode complete
 - [13:21:55] Processing audio tracks
   - Track 4352 (eng): Reencoding audio to AC3...
[13:23:16]PHASE ONE complete
[13:23:16]PHASE TWO - Rebuild Started
 - [13:23:16] Rebuilding AVCHD file Structure
[13:25:15] - Encode and Rebuild complete
 - WORKFILES folder removed.
[13:25:16] JOB: CHRIS_ISAAK finished.

The result was this below.

Code:

Video
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High@L4.0
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Codec ID                                 : 27
Duration                                 : 54mn 57s
Bit rate mode                            : Variable
Bit rate                                 : 10.0 Mbps
Maximum bit rate                         : 15.0 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.161
Stream size                              : 3.84 GiB (90%)

I'll redo the conversion.

jdobbs · 10th February 2014, 18:56

Quote:

Originally Posted by soneca

Sure, but it did not work, no resizing. .

Code:

[02/10/14] BD Rebuilder v0.46.11 (beta)
[11:35:01] Source:  CHRIS_ISAAK_00003
  - Input BD size: 14,99 GB
  - Approximate total content: [00:54:57.193]
  - Target BD size: 4,38 GB
  - Windows Version: 6.1 [7601]
  - MOVIE-ONLY mode enabled
  - RESIZE 1080p to 720p enabled
  - Quality: Highest (Very Slow), Two Pass
  - Output folder: E:\VIDEOS\
  - Decoding/Frame serving: DGDecNV [3-way]
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=448
[11:35:01] PHASE ONE, Encoding
 - [11:35:01] Processing: VID_00004 (1 of 1)
 - [11:35:01] Extracting A/V streams [VID_00004]
 - [11:37:27] Reencoding video [VID_00004]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 29,970fps, 98.817 frames
   - Bitrate: 10.097 Kbs
 - [11:37:27] Reencoding: VID_00004, Pass 1 of 2
 - [11:53:08] Reencoding: VID_00004, Pass 2 of 2
 - [13:21:55] Video Encode complete
 - [13:21:55] Processing audio tracks
   - Track 4352 (eng): Reencoding audio to AC3...
[13:23:16]PHASE ONE complete
[13:23:16]PHASE TWO - Rebuild Started
 - [13:23:16] Rebuilding AVCHD file Structure
[13:25:15] - Encode and Rebuild complete
 - WORKFILES folder removed.
[13:25:16] JOB: CHRIS_ISAAK finished.

The result was this below.

Code:

Video
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High@L4.0
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Codec ID                                 : 27
Duration                                 : 54mn 57s
Bit rate mode                            : Variable
Bit rate                                 : 10.0 Mbps
Maximum bit rate                         : 15.0 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.161
Stream size                              : 3.84 GiB (90%)

I'll redo the conversion.

I can look at it, but I'm pretty confident it works (unless some recent change has caused an issue), are you sure you didn't miss something?

I'll dig up a 1080i source and run a test. Can you post the AVS file from the WORKFILES folder?

soneca · 10th February 2014, 19:15

The folder was removed but I'll redo a quick test again.

jdobbs · 10th February 2014, 19:17

I do notice something... the log should say "Convert: 1280x720, 59.940fps..." right after "- Rate/Length: 29,970fps, 98.817 frames" -- or at least it does on the job I'm currently running. I wonder if BD-RB's analysis is flagging that source as a menu? That could disable resizing.

[Edit] Nope... I just looked at the code and the menu check is only done on a full backup...

soneca · 10th February 2014, 19:32

AVS file

Code:

#Created by BD Rebuilder - v0.46.11 (beta)
LoadPlugin("C:\Programas\DGDenNV 2046\DGDecodeNV.dll")
DGSource("E:\BDREBUILDER_TEMP\WORKFILES\VID_00004.DGI", fieldop=0)
ConvertToYV12()
LoadPlugin("C:\Programas\BD_Rebuilder\tools\decomb521.dll")
FieldDeinterlace(blend=true)
ConvertToYV12().AssumeFPS(30000,1001)

jdobbs · 10th February 2014, 19:56

Quote:

Originally Posted by soneca

AVS file

Code:

#Created by BD Rebuilder - v0.46.11 (beta)
LoadPlugin("C:\Programas\DGDenNV 2046\DGDecodeNV.dll")
DGSource("E:\BDREBUILDER_TEMP\WORKFILES\VID_00004.DGI", fieldop=0)
ConvertToYV12()
LoadPlugin("C:\Programas\BD_Rebuilder\tools\decomb521.dll")
FieldDeinterlace(blend=true)
ConvertToYV12().AssumeFPS(30000,1001)

Here's what mine says:

Code:

#Created by BD Rebuilder - v0.46.12 (beta)
DirectshowSource("N:\BD\SOURCE_BD\BDMV\STREAM\00002.m2ts", fps=29.97, framecount=93557, audio=false)
ConvertToYV12()
LoadPlugin("D:\BD_Rebuilder\tools\decomb521.dll")
FieldDeinterlace(blend=false)
BicubicResize(1280,720)
ConvertToYV12().AssumeFPS(30000,1001)

The frame rate is changed with the --pulldown double command in X264.

Here's what it says when I have PULLDOWN_720=0 (the default):

Code:

#Created by BD Rebuilder - v0.46.12 (beta)
DirectshowSource("N:\BD\SOURCE_BD\BDMV\STREAM\00002.m2ts", fps=29.97, framecount=93557, audio=false)
ConvertToYV12()
LoadPlugin("D:\BD_Rebuilder\tools\decomb521.dll")
FieldDeinterlace(blend=false)
BicubicResize(1280,720).ChangeFPS(60000,1001)
ConvertToYV12().AssumeFPS(60000,1001)

I have another job running on my computer with an nVidia card, and I'll test it with DGDecNV when it completes, but I think it will say the same.

omegaman7 · 10th February 2014, 20:01

Do you ever have to click the "Backup" button more than once? 3rd time's a charm just now :S But I was centered on the button. I wouldn't think that would matter. Perhaps even though the import completed, it was still doing something. No HDD activity though. It's done this a few times before too. Not really a big deal, just curious if anyone else noticed it.

jdobbs · 10th February 2014, 20:07

Quote:

Originally Posted by omegaman7

Do you ever have to click the "Backup" button more than once? 3rd time's a charm just now :S But I was centered on the button. I wouldn't think that would matter. Perhaps even though the import completed, it was still doing something. No HDD activity though. It's done this a few times before too. Not really a big deal, just curious if anyone else noticed it.

I've seen it when the cursor was off center before. But that's about it.

omegaman7 · 10th February 2014, 20:12

Quote:

Originally Posted by jdobbs

I've seen it when the cursor was off center before. But that's about it.

Ok. I believe I understand.

mparade · 10th February 2014, 23:20

....just have sent 100 bucks for this fantastic program and for further improvements on the 3D feature. Keep it up!

slimm · 11th February 2014, 00:13

Yeah, just got my tax refund, time to ante up.

jdobbs · 11th February 2014, 00:37

Quote:

Originally Posted by mparade

....just have sent 100 bucks for this fantastic program and for further improvements on the 3D feature. Keep it up!

Quote:

Originally Posted by slimm

Yeah, just got my tax refund, time to ante up.

Thank you very much! It is truly appreciated.

soneca · 11th February 2014, 02:20

Quote:

Originally Posted by jdobbs

Here's what mine says:

Code:

#Created by BD Rebuilder - v0.46.12 (beta)
DirectshowSource("N:\BD\SOURCE_BD\BDMV\STREAM\00002.m2ts", fps=29.97, framecount=93557, audio=false)
ConvertToYV12()
LoadPlugin("D:\BD_Rebuilder\tools\decomb521.dll")
FieldDeinterlace(blend=false)
BicubicResize(1280,720)
ConvertToYV12().AssumeFPS(30000,1001)

The frame rate is changed with the --pulldown double command in X264.

Here's what it says when I have PULLDOWN_720=0 (the default):

Code:

#Created by BD Rebuilder - v0.46.12 (beta)
DirectshowSource("N:\BD\SOURCE_BD\BDMV\STREAM\00002.m2ts", fps=29.97, framecount=93557, audio=false)
ConvertToYV12()
LoadPlugin("D:\BD_Rebuilder\tools\decomb521.dll")
FieldDeinterlace(blend=false)
BicubicResize(1280,720).ChangeFPS(60000,1001)
ConvertToYV12().AssumeFPS(60000,1001)

I have another job running on my computer with an nVidia card, and I'll test it with DGDecNV when it completes, but I think it will say the same.

I do not know what's going on...

but I can not resize anything interlaced.

slvrsrfr · 11th February 2014, 03:19

Quote:

Originally Posted by jdobbs

Often it can be fixed by simply reinstalling BD-RB, AVISYNTH, FFDHOW, and HAALI. But if the offending software is executed again -- you might be right back where you started.

Unfortunately, uninstalling/reinstalling everything didn't seem to fix it. Any other suggestions are appreciated!

jdobbs · 11th February 2014, 15:51

Quote:

Originally Posted by slvrsrfr

Unfortunately, uninstalling/reinstalling everything didn't seem to fix it. Any other suggestions are appreciated!

Post the contents of your CONFIG/INI file and I'll run a job using your settings.

slvrsrfr · 12th February 2014, 01:38

Quote:

Originally Posted by jdobbs

Post the contents of your CONFIG/INI file and I'll run a job using your settings.

Here you go ... if it still runs w/out issue for you i may just have to wipe my OS and start fresh, although i'd rather not do that; hopefully the clouds will part and a ray of light will beam down w/ an answer!

jdobbs · 12th February 2014, 05:48

Quote:

Originally Posted by slvrsrfr

Here you go ... if it still runs w/out issue for you i may just have to wipe my OS and start fresh, although i'd rather not do that; hopefully the clouds will part and a ray of light will beam down w/ an answer!

I'll try it first thing tomorrow.

slvrsrfr · 12th February 2014, 16:49

Quote:

Originally Posted by jdobbs

I'll try it first thing tomorrow.

Thanks, JDOBBS!

jdobbs · 12th February 2014, 18:40

Quote:

Originally Posted by slvrsrfr

Thanks, JDOBBS!

I ran "The Wire S1, Disc 1" again only with your settings this time. It still came out perfectly in sync. Sorry -- but it appears to be something on your system that is interfering with the decoding.

slvrsrfr · 12th February 2014, 20:14

Quote:

Originally Posted by jdobbs

I ran "The Wire S1, Disc 1" again only with your settings this time. It still came out perfectly in sync. Sorry -- but it appears to be something on your system that is interfering with the decoding.

I'm actually trying all 4 DVD discs from Season 1 (13 episodes) to one 25 GB BD...that's what your first test was right?

It seems to only be when BDRB has to reencode the episodes that they get out of sync. When the total content is less than 25 GB and it keeps the original content I don't have any issues (This happened with The Simpsons Season 4).

In any event, I can wipe my machine over the weekend and try fresh...

10th February 2014, 19:17	#19164 \| Link
jdobbs Moderator Join Date: Oct 2001 Posts: 21,108	I do notice something... the log should say "Convert: 1280x720, 59.940fps..." right after "- Rate/Length: 29,970fps, 98.817 frames" -- or at least it does on the job I'm currently running. I wonder if BD-RB's analysis is flagging that source as a menu? That could disable resizing. [Edit] Nope... I just looked at the code and the menu check is only done on a full backup... __________________ Help with development of new apps: Donations. Website: www.jdobbs.net Last edited by jdobbs; 10th February 2014 at 19:26.

10th February 2014, 20:01	#19167 \| Link
omegaman7 Registered User Join Date: Jan 2010 Location: USA, Oregon Posts: 791	Do you ever have to click the "Backup" button more than once? 3rd time's a charm just now :S But I was centered on the button. I wouldn't think that would matter. Perhaps even though the import completed, it was still doing something. No HDD activity though. It's done this a few times before too. Not really a big deal, just curious if anyone else noticed it. __________________ Only one rooster, need be in the hen house...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10th February 2014, 19:15	#19163 \| Link
soneca Registered User Join Date: Feb 2008 Location: Brazil Posts: 753	The folder was removed but I'll redo a quick test again.

10th February 2014, 23:20	#19170 \| Link
mparade Registered User Join Date: Nov 2013 Posts: 577	....just have sent 100 bucks for this fantastic program and for further improvements on the 3D feature. Keep it up!

11th February 2014, 00:13	#19171 \| Link
slimm Registered User Join Date: Dec 2009 Posts: 9	Yeah, just got my tax refund, time to ante up.