Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > (HD) DVD, Blu-ray & (S)VCD > DVD & BD Rebuilder

Reply
 
Thread Tools Search this Thread Display Modes
Old 7th November 2013, 17:44   #18141  |  Link
HWK
Registered User
 
HWK's Avatar
 
Join Date: Feb 2009
Location: Toronto, Ontario, Canada
Posts: 1,059
Quote:
Originally Posted by Crocluvr92 View Post
I checked my heatsink and downloaded CoreAVC and yet I still get the error! This never used to happen even with the new beta. Here is my log


[11/07/13] BD Rebuilder v0.44.17 (beta)
[00:57:45] Source: LAST_SAMURAI
- Input BD size: 29.19 GB
- Approximate total content: [04:39:20.710]
- Target BD size: 23.31 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[00:57:47] PHASE ONE, Encoding
- [00:57:47] Processing: VID_00000 (1 of 16)
- [00:57:47] Extracting A/V streams [VID_00000]
- [01:33:51] Reencoding video [VID_00000]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 221,816 frames
- Bitrate: 14,440 Kbs
- [01:33:52] Reencoding: VID_00000, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.44.17 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4504, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- WAVI: Ok
- TSMUXER: Ok
[01:34:17] - Failed video encode, aborted
Uninstall all the codecs pack including ffdshow and Haali Matroska Splitter and then reinstall only ffdshow and Haali Matroska Splitter from forum first page.

http://forum.doom9.org/showthread.php?p=1227473#post1227473
__________________
If you fail to plan; you plan to fail, would you not agree? Think about it.
HWK is offline   Reply With Quote
Old 7th November 2013, 18:34   #18142  |  Link
Nico8583
Registered User
 
Join Date: Jan 2010
Location: France
Posts: 761
For me, file searched on second phase exists during the encoding process and it seems to be renamed after encoding finish...
And an other thing, all .stats files are auto deleted but the last .stats file isn't deleted. And this file is encoded but original .264 is also present in the directory and the size of original .264 is lower than .264 encoded...

Last edited by Nico8583; 7th November 2013 at 18:37.
Nico8583 is offline   Reply With Quote
Old 8th November 2013, 18:52   #18143  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
The 3D discussion had pulled the thread way off topic -- so I've moved it to a thread of its own.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 8th November 2013 at 18:57.
jdobbs is offline   Reply With Quote
Old 8th November 2013, 19:00   #18144  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
@Darth_Emma and others

I found the cause of the "file not found" error during rebuild and have fixed it for the next release.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 8th November 2013, 20:01   #18145  |  Link
mparade
Registered User
 
Join Date: Nov 2013
Posts: 576
Failed to reencode audio, aborted

I met with the following problem in BD-RB:

----------------------
[11.08.13] BD Rebuilder v0.44.17 (beta)
[18:20:40] Source: JACK_THE_GIANT_SLAYER_00100
- Input BD size: 27,09 GB
- Approximate total content: [01:54:08.883]
- Target BD size: 7,32 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[18:20:40] PHASE ONE, Encoding
- [18:20:40] Processing: VID_00085 (1 of 1)
- [18:20:40] Extracting A/V streams [VID_00085]
- [18:29:38] Reencoding video [VID_00085]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 164*209 frames
- Bitrate: 6*769 Kbs
- [18:29:38] Reencoding: VID_00085, Pass 1 of 2
- [18:54:11] Reencoding: VID_00085, Pass 2 of 2
- [19:18:57] Video Encode complete
- [19:18:57] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [19:18:57] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [19:18:57] ReencodeAudio() 00070 1801
[19:20:14] - Failed to reencode audio, aborted

I do not really understand because I marked the following options in the setup window which can affect on audio reencoding:

- Do not convert DTS to AC3;
- Do not reencode AC3;
- Keep HD Audio for BD25;

The other two options were unmarked.

Please advise.
mparade is offline   Reply With Quote
Old 8th November 2013, 20:29   #18146  |  Link
Nico8583
Registered User
 
Join Date: Jan 2010
Location: France
Posts: 761
I have made a new test (but I have seen you have found the bug). I have choose 47 GB output (instead of 25GB) and I have launch backup with same settings. All is working (it's logical, there is no encode) but strange result is final ISO file fit into a BD25 without reencode
Nico8583 is offline   Reply With Quote
Old 8th November 2013, 20:35   #18147  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
Quote:
Originally Posted by mparade View Post
I met with the following problem in BD-RB:

----------------------
[11.08.13] BD Rebuilder v0.44.17 (beta)
[18:20:40] Source: JACK_THE_GIANT_SLAYER_00100
- Input BD size: 27,09 GB
- Approximate total content: [01:54:08.883]
- Target BD size: 7,32 GB
- Windows Version: 6.1 [7601]
- MOVIE-ONLY mode enabled
- Quality: Good (Very Fast), Two Pass
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[18:20:40] PHASE ONE, Encoding
- [18:20:40] Processing: VID_00085 (1 of 1)
- [18:20:40] Extracting A/V streams [VID_00085]
- [18:29:38] Reencoding video [VID_00085]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 164*209 frames
- Bitrate: 6*769 Kbs
- [18:29:38] Reencoding: VID_00085, Pass 1 of 2
- [18:54:11] Reencoding: VID_00085, Pass 2 of 2
- [19:18:57] Video Encode complete
- [19:18:57] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [19:18:57] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [19:18:57] ReencodeAudio() 00070 1801
[19:20:14] - Failed to reencode audio, aborted

I do not really understand because I marked the following options in the setup window which can affect on audio reencoding:

- Do not convert DTS to AC3;
- Do not reencode AC3;
- Keep HD Audio for BD25;

The other two options were unmarked.

Please advise.
Error 70 is "Permission Denied". It could be that you don't have rights to the output folder, a file is locked by another process, you don't have rights to the file, and a couple of other circumstances. Bottom line is that it is related to rights.

I'm guessing the source is DTS and you're outputting to AVCHD. In that case the flags don't matter, because AVCHD doesn't accept DTS (it isn't part of the AVCHD standard). You might try unclicking "Strict AVCHD" in SETUP.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 8th November 2013 at 20:53.
jdobbs is offline   Reply With Quote
Old 8th November 2013, 21:06   #18148  |  Link
mparade
Registered User
 
Join Date: Nov 2013
Posts: 576
Quote:
Originally Posted by jdobbs View Post
Error 70 is "Permission Denied". It could be that you don't have rights to the output folder, a file is locked by another process, you don't have rights to the file, and a couple of other circumstances. Bottom line is that it is related to rights.

I'm guessing the source is DTS and you're outputting to AVCHD. In that case the flags don't matter, because AVCHD doesn't accept DTS (it isn't part of the AVCHD standard). You might try unclicking "Strict AVCHD" in SETUP.
Yes, you are right, strict avchd remained checked.....
mparade is offline   Reply With Quote
Old 8th November 2013, 23:20   #18149  |  Link
Darth_Emma
Registered User
 
Join Date: Jan 2011
Posts: 38
Quote:
Originally Posted by jdobbs View Post
@Darth_Emma and others

I found the cause of the "file not found" error during rebuild and have fixed it for the next release.
Thank you. I will look for the new release and use that when you make it available.
Darth_Emma is offline   Reply With Quote
Old 8th November 2013, 23:40   #18150  |  Link
mparade
Registered User
 
Join Date: Nov 2013
Posts: 576
choosing which VID to encode problem

I would like to know what is the basis of choosing between the VIDS to reencode when switching from one output option to the other in case of full backup mode? BD-rebuilder chooses by itself specific VIDS to reencode based on the given capacity on which to store. The VIDS which are not going to be reencoded will remain intact (supposed to be). I would just like to know the process "behind the curtain". I am asking it because it seems to me that it doesn't really depend on the size of the VIDS, there must be something else, too I think. For example if I switch the target size from BD-5 to BD-25 a lot of big sized VIDS are going to be left intact, but some with similar or even smaller sizes are about to be reencoded. Please advise.
mparade is offline   Reply With Quote
Old 8th November 2013, 23:58   #18151  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
Quote:
Originally Posted by mparade View Post
I would like to know what is the basis of choosing between the VIDS to reencode when switching from one output option to the other in case of full backup mode? BD-rebuilder chooses by itself specific VIDS to reencode based on the given capacity on which to store. The VIDS which are not going to be reencoded will remain intact (supposed to be). I would just like to know the process "behind the curtain". I am asking it because it seems to me that it doesn't really depend on the size of the VIDS, there must be something else, too I think. For example if I switch the target size from BD-5 to BD-25 a lot of big sized VIDS are going to be left intact, but some with similar or even smaller sizes are about to be reencoded. Please advise.
Look in the HIDDENOPTS.TXT file for MIN_M2TS_SIZE. The only other determining factor would be whether or not the file is determined to be a menu.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 9th November 2013, 00:14   #18152  |  Link
mparade
Registered User
 
Join Date: Nov 2013
Posts: 576
Quote:
Originally Posted by jdobbs View Post
Look in the HIDDENOPTS.TXT file for MIN_M2TS_SIZE. The only other determining factor would be whether or not the file is determined to be a menu.
Ok, but it is still not clear, sorry. I have a VID with the size of 465 Mbyte for example, and I am in the output mode of BD-5, the program "wants" to reencode it, but if I simply switch to BD-25 mode the program ends up with the VID not located in the list anymore to be reencoded. It is not a menu and the size is above 100Mbyte, so there must be some other determining factor skipped.
mparade is offline   Reply With Quote
Old 9th November 2013, 20:55   #18153  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
BD Rebuilder v0.45.03 (beta)

I have updated the first post of this thread with a link to the most recent release of BD-RB (v0.45.03). Note: This release has a LOT of changes and new code related to the way importing and Quick-Play reauthoring works. I ask that beta testers please concentrate on these features and post any issues you find. One other note - remember that an import or Quick-Play reauthored disc that only has one item does NOT create a menu, so it will be very much like a movie-only disc. At least two playlists have to match the import criteria (minimum threshold) to be included and invoke the need for a menu.

Changes for this release:
Code:
- Made major changes to how the Quick-Play
  reauthoring mechanism works. Implemented an 
  interactive menu to the reauthored output.  
  Now you can browse and select from multiple 
  titles on Quick-Play reauthored discs. This 
  feature applies also to all imported titles 
  (DVD, Videofile, and BD).  This feature is 
  especially useful for combining and 
  reencoding multiple BD or DVD series discs 
  into a single BD-25 or BD-50.  It is also
  nice for creating a disc backup that comes
  up-and-running without annoying leader and
  sales information.
- Added significant new editing capabilities 
  associated with Quick-Play menu items.  The
  features include a dialog for viewing and/or
  modifying title information for imports and 
  Quick-Play reauthored discs.
- Improved the algorithm for finding duplicate
  playlists during import of multiple BDs via
  Quick-Play reauthoring.
- Changed the MP4BOX temporary folder setting 
  to use the specified working folder rather
  than the system default.
- Made a correction to the code related to
  the hidden option FORCED_SUB_LANG.  The 
  option wasn't working as designed in 
  v0.44.17. Also modified it so you can add 
  more than one language separated using a 
  semicolon. The languages are prioritized as 
  entered from left to right.
- Added a new hidden option REMOVE_IMPORT. If
  set, BD-RB will remove the folder used for
  import after the reencoding is successfully
  completed.  As with any auto-removal feature
  you should be very careful in its use.
- Added a multiple BD import feature.  Similar
  to the DVD import function, if multiple BDs
  are grouped together under a single selected
  source folder, BD-RB gives you the option
  of importing them as one (combining with the
  Quick-Play reauthoring format). Please note
  that the output to the IMPORT folder can be
  very large (equal to all the combined source
  BD folders).
- Improved the algorithm for determining title
  playback order during IMPORT of DVDs or BDs.
- Added BD-50 as a selectable target size in
  the OUTPUT OPTIONS menu.  This should be of
  particular use when creating collections via
  the IMPORT functions.
- Removed DVD_IMPORT_THRESHOLD from the hidden
  options. It was renamed to IMPORT_THRESHOLD,
  now applies to both DVD imports and BD 
  imports, and is set via dialong.
- Added new option MENU_AUTO_BACKGROUND. This
  setting is currently experimental to some
  degree.  When set to "1" (the default) it 
  will tell BD-RB to attempt to find and 
  utilize a menu background & audio track from 
  the source disc when doing an import or 
  Quick-Play encode. Set via dialog.
- Made "zlib" compression the default for MKV
  output to better comply with the Matroska 
  standard. Also added a new hidden option 
  "USE_ZLIB" that is documented in the 
  HIDDENOPTS.TXT file. Setting this option to 
  "0" disables zlib compression (for the few 
  players that may not support it).
- Corrected an issue in which an out-of-place
  secondary audio stream could cause the PIDs
  to be incorrectly updated in the MPLS file
  during a full backup.
- Corrected an error in which LPCM sources in
  DVDs were not being imported.
- Added code that will shorten the amount of 
  time used to scan sources on movie-only
  backups -- especially in situations where the
  number of M2TS files is large.
- Fixed an error that could result in failed
  rebuild due to missing .264 file on certain
  multipart sources being encoded in movie-only
  mode.
- Updated the included version of X264.EXE to 
  the latest release (r2377).
- Updated the included version of X264-64.EXE 
  to the latest release (r2377).
- Other minor corrections and cosmetic fixes.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 9th November 2013 at 21:57.
jdobbs is offline   Reply With Quote
Old 9th November 2013, 21:38   #18154  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
I just noticed there is a bug I caused recently in the BD import function that results in "Runtime Error 9, Subscript out of Range" -- ugghhh... after two weeks of testing I cause an error in the last couple of changes.

Anyway, I'll find it, fix it, and post another version in the next hour or so.

[Edit] Ok, it's fixed and has been uploaded -- the first post has also been updated. I've also fixed it so any attempts to download v0.45.02 from the jdobbs site will actually get v0.45.03 as well.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 9th November 2013 at 22:10.
jdobbs is offline   Reply With Quote
Old 9th November 2013, 23:09   #18155  |  Link
RobertM
Registered User
 
Join Date: Apr 2011
Posts: 424
Quote:
Originally Posted by jdobbs View Post
...a link to the most recent release of BD-RB (v0.45.03). Note: This release has a LOT of changes...
Boy, that looks like it was a lot of work! Thanks, again, JD, for keeping this app going - much appreciated. Without a doubt I'll be making my usual Christmas donation
RobertM is offline   Reply With Quote
Old 9th November 2013, 23:21   #18156  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,665
Quote:
Originally Posted by RobertM View Post
Boy, that looks like it was a lot of work! Thanks, again, JD, for keeping this app going - much appreciated. Without a doubt I'll be making my usual Christmas donation
It was definitely a lot of work. The reauthoring mechanism turned out to be a much bigger project than I anticipated.

I appreciate your support.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 10th November 2013, 00:20   #18157  |  Link
Glarioo
Registered User
 
Join Date: Dec 2011
Posts: 126
MKV vbv buffer/maxrate settings

Quote:
Originally Posted by jdobbs View Post
Two pass doesn't necessarily give better quality -- it just makes sure the output size is predictable. That's important when you have to fit your output on a DVD or BD disc, but not really that important for most MKV applications. It's more accurate to say that 2-pass gives the best quality available at a given average bitrate and CRF gives the most consistent quality level (keeping the Q about the same no matter how complex the picture) but with lots of variability in output size. The max bitrate would make a difference only in the most complex picture elements (assuming it is reasonable) -- and that would apply to both methods.

MKV vbv buffer/maxrate settings will be available in the next release. Be careful, though, you don't want to set the max bitrate too high. I used the 30Mbs value because it can be supported within the limitations of a blu-ray disc (e.g. storing MKVs on a BD-R). You'd likely have to increase resolution beyond 1080p to need more than that.
Is it possible to set vbv buffer/maxrate (2-pass MKV) in v0.45.0.3?
I can't find it the hidden options.

Last edited by Glarioo; 10th November 2013 at 00:35.
Glarioo is offline   Reply With Quote
Old 10th November 2013, 00:36   #18158  |  Link
Darth_Emma
Registered User
 
Join Date: Jan 2011
Posts: 38
jdobbs:
FYI... the new version worked great on Monsters U.

Thanks for all the hard work you do.

I am sending a lil something via Paypal right now. Been meaning to do that for quite a while...
Darth_Emma is offline   Reply With Quote
Old 10th November 2013, 00:38   #18159  |  Link
soneca
Registered User
 
Join Date: Feb 2008
Location: Brazil
Posts: 753
Quote:
Originally Posted by jdobbs View Post
I have updated the first post of this thread with a link to the most recent release of BD-RB (v0.45.03).
Thanks!!!
soneca is offline   Reply With Quote
Old 10th November 2013, 01:14   #18160  |  Link
gonca
Registered User
 
Join Date: Jul 2012
Posts: 1,023
Import DVD(s)----Default menu works perfectly. Edited menu seems to hang. Must state that I am using TMT 6 to test. Doing encode with default menu now.
gonca is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:47.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.