Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
|
|
Thread Tools | Search this Thread | Display Modes |
27th April 2010, 17:39 | #7541 | Link |
Registered User
Join Date: Mar 2010
Posts: 12
|
Dzieki!!!
My CPU its an AMD X2 4200+, 4 GBs of RAM, a combo bluray-HDDVD drive, and playing fine with the bundled powerdvd ultra. Also, remuxed movies work fine, no matter what codec (VC1, H264). For your info, I tried another software to test the same conversion, and let it use the original VC1 codec bundled with Windows 7 instead of the ffdshow one: The result was a little better, more "in synch", but still not perfect. But the CPU power could be that important when converting video? I mean, besides taking longer, should be no problem, right? Thanks again. |
27th April 2010, 18:05 | #7542 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,806
|
show my demuxlog.txt from job folder.
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
27th April 2010, 20:15 | #7544 | Link | |
Registered User
Join Date: Apr 2006
Posts: 21
|
Quote:
I do go to standby mode when I can and Ripbot264 works fine in those situations. However, I run Ripbot in 64-bit Windows7 on a dual boot machine ('cause I do not have the resources to own two computers). I run Ripbot overnight in Windows7, but in the morning I need to run Windows XP. If Ripbot has not finished encoding, it means that I've got to abort the second pass, shut down my PC, and reboot in another OS. This means I have to start at the beginning again the next night. It sure would be nice if I could use the perfectly fine audio file and the perfectly fine first pass data files (job1.stats and job1.stats.mbtree?) that are already on my hard drive. This would save me a couple of hours of encoding time. I'm not asking to restart from where I left off in pass 2. I'm just asking for a couple of check boxes so I can cut directly to the code that creates the 2nd pass (and then remuxes). I can understand that my request may muck up your user interface or otherwise be too hard for you to program, but would you at least think about it? Also, could you tell me if it actually is OK to simply run job1_EncodeVideoPass2 followed by job1_MuxFiles in a CMD window? Edit It just occurred to me that if I comment out all of the lines the Encode_Audio and Encode_VideoPass1 batch files, then Ripbot will do what I want (if I do not edit the job). I'll give it a try. Last edited by Hyrax; 27th April 2010 at 20:21. Reason: more thoughts... |
|
27th April 2010, 20:34 | #7545 | Link | |
Registered User
Join Date: Apr 2010
Posts: 11
|
Quote:
- A radio button on the jobs window for a save-as option for wtv. - Create a script to issue the command: Code:
"<DVRMSToolbox Inst_dir>\Applications\todvrms.exe" "<mkv output dir>\output.mkv" "<final output dir>"\output.wtv" -wtv Is this possible? It would be so nice for the Win7 MC and xbox extender folks. thanks, Rob Last edited by robf; 27th April 2010 at 20:51. |
|
27th April 2010, 20:43 | #7546 | Link |
Registered User
Join Date: Mar 2010
Posts: 12
|
Hi there, Again.
Atak, there is no demuxlog.txt in the temp/job folder. There is one info.txt: 142806 23.976044 48000 6 285895680 1920 1080 and one mkvinfo.txt, attached to this post. The rest is the audio.ac3, chapters file, getframe and getinfo.avs, job.avs and mkvextract.cmd This is before conversion. Maybe that log you ask is after? Thanks in advance. |
27th April 2010, 21:17 | #7547 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,806
|
Don't use MakeMKV! Remember simpler solutions are often the best
1) Activate AnyDVD HD (it must run in background!) 2) select ANY .m2ts from Blu-Ray disc in ripbot264 3) demuxing may take even 30 min so don't panic 4) encode and let me know if you have still audio sync issues. Use lower resolution and CQ mode to speed up whole process.
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
28th April 2010, 00:56 | #7548 | Link |
Registered User
Join Date: Feb 2008
Posts: 21
|
RipBot does not like my TrueHD audio streams from my HD DVD rips. Is there a good way to get around this?
[EDIT] Perhaps I spoke too soon. Here's the error I am getting now: DirectShowSource: couldn't open file D:\Temp\RipBot264temp\job1\video.mkv: Cannot play back the video stream: no suitable decompressor could be found. (D:\Temp\RipBot264temp\job1\getinfo.avs, line 2) I have everything required installed, including the most current version of FFDshow. I'm trying to do this to a ripped version of my Blade Runner HD DVD on a Windows Server 2003 machine (with some codec stuff installed to handle what Server 2k3 lacks there). Last edited by Happysin; 28th April 2010 at 01:07. Reason: I made a mistake. |
28th April 2010, 03:50 | #7550 | Link |
Registered User
Join Date: Feb 2008
Posts: 21
|
No, it's WMP10, but I have Windows Media Encoder and something else (I forget what, it was a while back) that is supposed to make WMP handle everything WMP11 is supposed to, media-wise.
Unfortunately, until Windows Home Server 2 comes out, I have no choice on upgrading that OS. :/ |
28th April 2010, 21:58 | #7554 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,806
|
Upload sample where corruption occurs to www.mediafire.com
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
28th April 2010, 22:01 | #7555 | Link | ||
Registered User
Join Date: Apr 2010
Posts: 3
|
Thanks for the replies guys..
Quote:
Quote:
Also, what does everyone use to insert forced subtitles? I would prefer to use something like SupTitle as it renders it into the image vs having to OCR it. But as of so far, I haven't been able to make it work ( video renders with no subtitles). This is my modified job avs script if someone can point me in the right direction... As a note, I tried moving the subtitles section before the resize section without any effect. Code:
#MT #VideoSource video=DirectShowSource("[temp path]\job3\video.mkv",audio=false).ConvertToYV12() #Deinterlace #Decimate #Crop #Resize video=Spline36Resize(video,1280,720).Sharpen(0.2) #Subtitles LoadPlugin("[tools path]\SupTitle.dll") video.SupTitle("[temp path]\job3\English_FORCED.sup",forcedOnly=true,swapCbCr=false,relocate=true,relocOffset="0,0,0,0") #Colors #Denoise #AudioSource LoadPlugin("[tools path]\NicAudio\NicAudio.dll") audio=RaWavSource("[temp path]\job3\audio_English.dtsma.wav",1) audio=ResampleAudio(audio,48000) #DownMix #Delay audio=DelayAudio(audio,0) #Tempo #Normalize audio=Normalize(audio,1) #AudioDub audio=ConvertAudioTo16bit(audio) AudioDub(video,audio) #Triming #AVSameLength Trim(0,232607) #ColorSpace Last edited by TheAncientEvil; 28th April 2010 at 22:04. |
||
29th April 2010, 00:04 | #7556 | Link |
Registered User
Join Date: Dec 2008
Posts: 9
|
Here is a sample of the encode. The anomaly happens right when the crow appears.
http://www.mediafire.com/?zghm43izdjw |
29th April 2010, 13:38 | #7559 | Link |
RipBot264 author
Join Date: May 2006
Location: Poland
Posts: 7,806
|
@Peakr
1) Make sure your CPU and memory are 100% stable. Run this for couple hours. Select max memory. 2) Update ffdshow 3) download newer x264_x86.exe and x264_x64.exe from x264.nl
__________________
Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper |
29th April 2010, 21:14 | #7560 | Link |
Registered User
Join Date: Dec 2008
Posts: 9
|
Yeah I ran LinX and Prime95 for hours on end when I first overclocked this rig. Stable as a rock. I'll check again though and try the other things. Thanks for the input.
edit: By the way which version of ffdshow do you recommend. I've been using THIS one for years now. Last edited by Peakr; 30th April 2010 at 04:40. |
Tags |
264, 265, appletv, avchd, bluray, gui, iphone, ipod, ps3, psp, ripbot264, x264 2-pass, x264 gui, x264_64, x265, xbox360 |
Thread Tools | Search this Thread |
Display Modes | |
|
|