RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Ajax_Undone]

Originally Posted by cafevincent

Now the AviSynth Error says:

DirectShowSource : Timeout waiting for graph to start.
(C:\Temp\RipBot264temp\job1\getinfo.avs, line 2)

Use the file from here.

http://forum.doom9.org/showpost.php?...postcount=7335

[cafevincent]

Originally Posted by Ajax_Undone

Use the file from here.

http://forum.doom9.org/showpost.php?...postcount=7335

Still the same error message.

AviSynth Error

DirectShowSource : Timeout waiting for graph to start.
(C:\Temp\RipBot264temp\job1\getinfo.avs, line 2)

edit:

Other file gives AviSynth error
DirectShowSource: couldn't open file C:\Temp\RipBot264temp\job1\video.mkv:
The system cannot find the file specified.
(C:\Temp\RipBot264temp\job1\getinfo.avs, line 2)

[krazdkiller]

Originally Posted by krazdkiller

ripbot once it gets to a certain point in gathering data i get the error. any help with this would be greatly appreciated.

avs2avi.exe has stopped working

Problem signature:
Problem Event Name: APPCRASH
Application Name: avs2avi.exe
Application Version: 0.0.0.0
Application Timestamp: 40eb0522
Fault Module Name: DivXDec.ax_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4bb651da
Exception Code: c0000005
Exception Offset: 04fd9292
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Windows 7 Ultimate
Asus Rampage Formula
Asus Nvidia 9500 - 512mb

EDIT:

i managed to get pass the avs2avi.exe error, but now when ripbot is done it is not creating the out put file.

C:\>"E:\My Downloads\Monitors - Sound - Video - Video Cards - Web Cam\RipBot264 1.15.1\tools\x264\x264_x86.exe" "C:\temp\RipBot264temp\job1\job1.avs" --crf 22 --fps 24000/1001 --min-keyint 24 --keyint 240 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --filter 0,0 --ref 3 --bframes 3 --b-adapt 1 --b-pyramid none --subme 7 --aq-mode 1 --trellis 1 --partitions all --me umh --output "C:\temp\RipBot264temp\video.264"

avs [info]: 608x320p 1:1 @ 10000000/417083 fps (cfr)

x264 [info]: using SAR=1/1

x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64

x264 [info]: profile High, level 4.0

x264 [info]: frame I:1333 Avg QP:16.53 size: 24412

x264 [info]: frame P:57631 Avg QP:20.67 size: 5103

x264 [info]: frame B:118284 Avg QP:26.74 size: 795

x264 [info]: consecutive B-frames: 4.0% 13.2% 18.0% 64.9%

x264 [info]: mb I I16..4: 8.2% 81.2% 10.6%

x264 [info]: mb P I16..4: 1.0% 5.5% 0.6% P16..4: 45.4% 16.9% 6.7% 0.5% 0.5% skip:22.9%

x264 [info]: mb B I16..4: 0.1% 0.4% 0.0% B16..8: 33.1% 0.8% 1.2% direct: 1.1% skip:63.3% L0:37.1% L1:51.4% BI:11.5%

x264 [info]: 8x8 transform intra:78.4% inter:72.7%

x264 [info]: coded y,uvDC,uvAC intra: 71.3% 71.2% 31.5% inter: 13.0% 12.1% 0.9%

x264 [info]: i16 v,h,dc,p: 44% 22% 15% 19%

x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 18% 27% 4% 5% 6% 5% 6% 5%

x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 16% 14% 6% 9% 9% 8% 7% 6%

x264 [info]: Weighted P-Frames: Y:0.9%

x264 [info]: ref P L0: 69.1% 10.4% 15.7% 4.7% 0.1%

x264 [info]: ref B L0: 90.4% 9.6%

x264 [info]: kb/s:455.23



encoded 177248 frames, 49.67 fps, 455.23 kb/s


C:\>"E:\My Downloads\Monitors - Sound - Video - Video Cards - Web Cam\RipBot264 1.15.1\tools\mkvtoolnix\mkvmerge.exe" -o "C:\Users\KrazdKiller\Desktop\Julie & Julia.mkv" --title "Julie & Julia" --default-duration 0:24000/1001fps -d 0 -A -S "C:\temp\RipBot264temp\video.264" --language 0:und --sync 0:0 -a 0 -D -S "C:\temp\RipBot264temp\job1\audio.mp3"

The system cannot find the path specified.
-------------------------

Elapsed Time: 00h:59m:32s

[TRONDROM]

Originally Posted by Zorro70

Firstly thank you for this great app, been using it for ages and its fantastic.

Can somebody please tell me why this version just will not work for me.

If i use the inbuilt profiles its fine but im after great avchd quality.

can you take a look at my 1080p profile and see why its not working with this version, but works with 1.15.0

--level 4.1 --aud --nal-hrd --vbv-bufsize 25000 --vbv-maxrate 25000 --rc-lookahead 50 --aq-mode 1 --aq-strength 0.8 --merange 64 --psy-rd 0.80:0.00 --no-dct-decimate --no-fast-pskip --filter -2,-2 --keyint 240 --min-keyint 24 --ref 3 --bframes 5 --b-pyramid strict --b-adapt 2 --direct auto --subme 9 --trellis 2 --partitions p8x8,b8x8,i4x4,i8x8 --me esa



there must be something wrong in my profile....help


and thank you

There's no hope for this, buddy....go back to DVDs.....

[mmmmdonut]

Originally Posted by Ajax_Undone

Same results as above.
The old aTV profile has --no-cabac --weightp 0 It always seemed to work
fine for me. Then again the vbv buf size and max have changed to 14000 each
and so has the level from 3.0 to 3.1. I did as mmmmdonut did and got the
same results. Only I used independents day.

I don't think ATV was meant to play 30fps @ 720p.

Over at the handbrake site there was a quick post about x264 dev's stating it was bad idea to use small vbv buf size. Now the profile Atak put together has always been good and through the numerous encodes I have only exceeded the 5000 buffer size once. I dont think bumping the buffer size up to say 10000 and leaving max at 12000 or moving it to 14000 would hurt anything.

As for 3.1 vs 3.0 there is zero difference there. Using 3.1 just cleans up the log files since it raises the bit rate limit.

I do like in the new profile the bump in ref frames. Also new is --aud --nal-hrd which I'm not sure what that setting does as I havent researched it yet. I know I've seen folks talk about it before in the PS3 profile.

[mmmmdonut]

@krazdkiller whats in your temp\ripbot... dir? Specifically job1 dir.

[krazdkiller]

Originally Posted by mmmmdonut

@krazdkiller whats in your temp\ripbot... dir? Specifically job1 dir.

you mean my normal temp folder? if so there is no ripbot folder in it. what is in the last post is job 1 listed in the logs folder.

[Zorro70]

Originally Posted by TRONDROM

There's no hope for this, buddy....go back to DVDs.....

thank for the help tron lol

[mmmmdonut]

@krazdkiller - While I dont see anything wrong with pathing other than the really long path to ripbot, try the following from command line

change your working directory to tools\mkvtoolnix. Then run the following: mkvmerge.exe -o "C:\Users\KrazdKiller\Desktop\Julie & Julia.mkv" --title "Julie & Julia" --default-duration 0:24000/1001fps -d 0 -A -S "C:\temp\RipBot264temp\video.264" --language 0:und --sync 0:0 -a 0 -D -S "C:\temp\RipBot264temp\job1\audio.mp3"


You might want to verify that c:\temp\ripbot264temp\video.264 and c:\temp\ripbot264temp\job1\audio.mp3 exist prior to.

My guess is the error "The system cannot find the path specified" is when it calls mkvmerge. Running the command by hand will help you narrow down where the problem is.

[krazdkiller]

Originally Posted by mmmmdonut

@krazdkiller - While I dont see anything wrong with pathing other than the really long path to ripbot, try the following from command line

change your working directory to tools\mkvtoolnix. Then run the following: mkvmerge.exe -o "C:\Users\KrazdKiller\Desktop\Julie & Julia.mkv" --title "Julie & Julia" --default-duration 0:24000/1001fps -d 0 -A -S "C:\temp\RipBot264temp\video.264" --language 0:und --sync 0:0 -a 0 -D -S "C:\temp\RipBot264temp\job1\audio.mp3"


You might want to verify that c:\temp\ripbot264temp\video.264 and c:\temp\ripbot264temp\job1\audio.mp3 exist prior to.

My guess is the error "The system cannot find the path specified" is when it calls mkvmerge. Running the command by hand will help you narrow down where the problem is.

so how do i go about changing the working directory? i have RipBot264\Tools but no "mkvtoolnix"

i created the folder structures on c, and i created the mkvtoolnix folder. i am not finding mkvmerge.exe. i have checked both f and c.

[mmmmdonut]

redownload the package back on page one. When you extract it you should see a mkvtoolnix directory under tools. Since you are missing this one tool you might want to compare what you just downloaded versus what you have loaded on your machine.

[krazdkiller]

Originally Posted by mmmmdonut

redownload the package back on page one. When you extract it you should see a mkvtoolnix directory under tools. Since you are missing this one tool you might want to compare what you just downloaded versus what you have loaded on your machine.

Atak_Snajpera, upload a new ripbot installer that downloads and installs all the required files / programs. i have installed it and it looks like i have everything you have mentioned so far. i am now attempting another conversion. be done in about 13 minutes.

EDIT:

Downloading and installing the latest installer did the trick. I have my movie sitting on my desktop now. Thanks for the help. I know basically what messed me up in the first place. That was installing the Divx Plus Codec pack so i could have MKV thumbnails. Now I know in the future that i deal with k-lite first, Divx Codecs second, and then RipBot264. Thanks again for the help.

P.S.

Ripbot is a great program. I have tried WonderShare, but you have to go into the setting for each video you want to convert and make sure that it does not change the aspect ratio. I have tried Total Video Converter, and it decreases the quality. RipBot264 is just set it and forget it. The amount of space I am able to save using MKV's versus AVI's, and the video is the same quality or better is fantastic.

[illestdomer2005]

So I am doing 2-pass encodes, and my first pass CPU utilization varies wildly. Right now, I am doing another encode of Avatar (forgot subtitles), and my first pass is running at 45fps, but it's only using 45% of the CPU. The CPU is an i7 920 @4.2GHz w/HT on. On 2nd pass, it is darn near 100% utilization, but I read/heard that the problem could be that ffdshow can't decode it as fast as x264 is trying to sample it?

Any help is appreciated!

[vickiy]

Have some questions here,

I've tried this 1.15.1 ver. there're some minor things and I'm wonder whether there'll be update. First of all, i'm dealing some files with Chinese filenames, and GUI doesn't recognize CHN.ts files but does for CHN.mpg files. second is that, even it can work with the CHN.mpg files, after done with setting, I click OK. when it returns to the job lists, the CHN filenames with become miscoded and unreadable. I remember the previous version doesn't have this same problem. Can you please do some minor update to fix the language issue? Thanks a lot, I really love this simple but powerful tool!

[vickiy]

Originally Posted by vickiy

Have some questions here,

I've tried this 1.15.1 ver. there're some minor things and I'm wonder whether there'll be update. First of all, i'm dealing some files with Chinese filenames, and GUI doesn't recognize CHN.ts files but does for CHN.mpg files. second is that, even it can work with the CHN.mpg files, after done with setting, I click OK. when it returns to the job lists, the CHN filenames with become miscoded and unreadable. I remember the previous version doesn't have this same problem. Can you please do some minor update to fix the language issue? Thanks a lot, I really love this simple but powerful tool!

I've uploaded a sample

http://www.megaupload.com/?d=WKMIE16U

can you please try if you can open it ? Thanks a lot!

[harrystruman]

Hello there.

@atak

Long time since my last question. Remember what was the problem? The VC1 sources "moving around" with the audio synch, sometimes more, sometimes less (but always miliseconds, enough to notice that the audio comes first, then the picture of the action). The last thing you told was to use anydvd instead of makemkv, so I'd let ripbot all the process.

I did it, and it wasn't possible until last night to check it, well, I checked, and it goes the same. So the problem isn't in the MKV or ripped files. It has to be in the directshow system, 'cause now, in addition to those mini-synch problems, I have a couple of "scratches" (blockiness) in the movie (in fact, when one of those scratches occurs, the picture freezes for a milisecond, maybe its the cause of all of this)

The point being, ffdshow seems to have a problem in my system decoding vc1 streams, as it would skip some frames sometimes, or not decoding it that good, then it could be the reason.

I think I didnt had any problem before, in windows XP, but in windows 7 I havent managed to make one good conversion from a warner bluray.

Any advice? thanks in advance.

[Ajax_Undone]

Originally Posted by krazdkiller

Atak_Snajpera, upload a new ripbot installer that downloads and installs all the required files / programs. i have installed it and it looks like i have everything you have mentioned so far. i am now attempting another conversion. be done in about 13 minutes.

EDIT:

Downloading and installing the latest installer did the trick. I have my movie sitting on my desktop now. Thanks for the help. I know basically what messed me up in the first place. That was installing the Divx Plus Codec pack so i could have MKV thumbnails. Now I know in the future that i deal with k-lite first, Divx Codecs second, and then RipBot264. Thanks again for the help.

P.S.

Ripbot is a great program. I have tried WonderShare, but you have to go into the setting for each video you want to convert and make sure that it does not change the aspect ratio. I have tried Total Video Converter, and it decreases the quality. RipBot264 is just set it and forget it. The amount of space I am able to save using MKV's versus AVI's, and the video is the same quality or better is fantastic.

LOL I am the one who builds the installer.... The link is in my signature...

[dragon_warrior]

Hi guys
I've downloaded a vid ripped from .VOB -> .MKV. It's quite good but I dunno how to do it
Btw, this is the command line

cabac=1 / ref=9 / deblock=1:-2:-2 / analyse=0x3:0x133 / me=umh / subme=7 / psy=1 / psy_rd=1.0:0.0 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=3 / nr=0 / decimate=1 / mbaff=0 / constrained_intra=0 / bframes=9 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=1 / wpredb=0 / wpredp=2 / keyint=300 / keyint_min=30 / scenecut=40 / rc_lookahead=40 / rc=2pass / mbtree=1 / bitrate=2292 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=30000 / vbv_bufsize=30000 / ip_ratio=1.40 / aq=1:1.00

Anyone understands this? And how to adjust this in RipBot?

[Guest]

Originally Posted by dragon_warrior

I've downloaded a vid ripped from .VOB -> .MKV

Please read and follow our forum rules, specifically rule 6. You may not discuss such downloaded material.

@all

Do not respond to this issue.

[MKVCrazy]

Grr, there's no such thing is 'got-over-with-problems' when it comes to encoding/converting I have a new problem. I have everything working but somehow it will not continue to encode. For example I queued a lot of videos in the RipBot but it'll do only the first one or two then skips the rest. See this example. I have K-Lite and everything was working. I don't know what messed up my baby RipBot