Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > (HD) DVD, Blu-ray & (S)VCD > DVD & BD Rebuilder

Reply
 
Thread Tools Search this Thread Display Modes
Old 28th November 2010, 15:30   #10321  |  Link
audit13
Registered User
 
Join Date: Feb 2010
Posts: 3
Quote:
Originally Posted by Capsbackup View Post
What are you playing the backups with, software player or standalone?
I used a Sony bdps-370 standalone.

I also used TotalMedia Theatre 3 on my htpc to playback the bdmv folder from my hard drive.

Quote:
Originally Posted by jdobbs View Post
It's never happened to me... but if you did it with a version prior to 36.3 it could be this:

Code:
- Corrected an error in which audio streams that
  contained delays, and were not in the initial
  (SETUP defined) list of selections, could (if
  later selected from the streams list) be muxed
  out-of-sync.
I used version 36.04 and it just finished compressing for a second time. I tried playing bak the bdmv folder on my htpc and the audio is out of synch. I went back to the original and the original is fine.

Not sure but I'll do a full backup to see if that makes a difference.

Thanks for the information.
audit13 is offline   Reply With Quote
Old 28th November 2010, 15:32   #10322  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by worknstiff View Post
FYI: Regarding my Panasonic DMP-BDT350 (Quote: Bluray player BDT350 plays most of my backup BD_RB disks just fine, but not all.) Don't know if there is an easy fix for this but just in case anyone else has this problem, the difference between the unplayable disks and the newest disks processed by BD_Rebuilder are that they are High Profile 4.0 instead of High Profile 4.1 that was used earlier. I wonder when this was changed and why? I wonder why my older BD35 can play both and the BDT-350 plays it but with no video output. It is weird because you would think the BDT350 would like the higher bitrate allowed by the 4.1 profile, but I'm sure jdobbs must have had a good reason to go back to 4.0 from the older 4.1 profile. I wish there was an easy fix to make these older disks playable without recoding and burning all of them. At any rate thanks jdobbs for the great program, even if there are a few glitches here and there. It is a work in progress after all.
It was changed to Level 4.0 on BD-5/9 specifically to provide greater compatibility on certain players. It's interesting that Panasonic would see issues. From the AVCHD Wiki:
Quote:
Panasonic AVCHD camcorders use AVC with High Profile @ Level 4.0 for all modes except 1080p50/1080p60, which are encoded with High Profile @ Level 4.2. Maximum data rate is limited to 24 Mbit/s for AVCCAM models, to 17 Mbit/s for most consumer models and to 28 Mbit/s for 1080p50/1080p60 recording modes.
My guess is that they have built their players to specifically support their recorders... Panasonic has a history of going their own way. Remember DVD-RAM?

It's one of those "how you interpret it" things... according to spec AVCHD will support Level 4.1 up to 24Mbs or Level 4.0 up to 18Mbs. DVD media (as defined in this context) is limited to 18Mbs -- so some people read that as "DVD must be Level 4.0". On the other hand, some would say there should no reason you can't use Level 4.1 -- since you can limit the bitrate as you see fit without changing the level.

There's really no disadvantage to using Level 4.0 when outputting to DVD, so I changed the code to make it more compatible.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 28th November 2010 at 16:06.
jdobbs is offline   Reply With Quote
Old 28th November 2010, 16:15   #10323  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by audit13 View Post
I used a Sony bdps-370 standalone.

I also used TotalMedia Theatre 3 on my htpc to playback the bdmv folder from my hard drive.



I used version 36.04 and it just finished compressing for a second time. I tried playing bak the bdmv folder on my htpc and the audio is out of synch. I went back to the original and the original is fine.

Not sure but I'll do a full backup to see if that makes a difference.

Thanks for the information.
It's possible that the secondary video may be a hybrid or pulldown source that isn't being decoded properly... I'll take a look at it.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 28th November 2010, 16:18   #10324  |  Link
bassnut
Registered User
 
Join Date: May 2009
Posts: 51
Quote:
Originally Posted by omegaman7 View Post
Just encoded "The expendables"(BD-25) yesterday. Longest encode thus far. 13+ hours at High quality (Default) with quick encode for extras. I have a feeling it's gonna be a while before we tame that down to under an hour average :S

Jdobbs, you said you have a quad, I'm curious how yours fairs? My Phenom 940 @3.5Ghz is my X264 slave How long did your backup of "The Expendables" take? I'm planning a new build in february. Wondering if it's really worth it...
I am doing the Expendables now. Had a motherboard die on me and the system is not quite setup yet but will let you know how long. PII 109T on CROSSHAIR IV Extream. The PII1090T on my old 790FX was running about 1.5 hours on default quallity settings.
bassnut is offline   Reply With Quote
Old 28th November 2010, 19:23   #10325  |  Link
omegaman7
Registered User
 
omegaman7's Avatar
 
Join Date: Jan 2010
Location: USA, Oregon
Posts: 791
Thanks Jdobbs, and everyone concerned. I did realize that there is a great deal of video space on the disc(5+hrs). The BD-50 was after all 46+Gb. One of the largest I've dealt with.
Just over 7hrs eh? Hmmm, perhaps you removed things I did not. Most the time, it averages between 5 - 8 hrs. If 1090t can average 1.5hrs, Bulldozer WILL be justified. I guess I should wait and see though. I think they're figuring quarter one on Bulldozer release

I guess I could see how my 965 @ 3.9Ghz fairs by comparison. Could be an interesting experiment
omegaman7 is offline   Reply With Quote
Old 28th November 2010, 21:55   #10326  |  Link
bassnut
Registered User
 
Join Date: May 2009
Posts: 51
Quote:
Originally Posted by omegaman7 View Post
Thanks Jdobbs, and everyone concerned. I did realize that there is a great deal of video space on the disc(5+hrs). The BD-50 was after all 46+Gb. One of the largest I've dealt with.
Just over 7hrs eh? Hmmm, perhaps you removed things I did not. Most the time, it averages between 5 - 8 hrs. If 1090t can average 1.5hrs, Bulldozer WILL be justified. I guess I should wait and see though. I think they're figuring quarter one on Bulldozer release

I guess I could see how my 965 @ 3.9Ghz fairs by comparison. Could be an interesting experiment
Well the expendables is still running and looks like it will be done shortly so about 6 hrs at High Quality(default) Settings. So it comes out a little longer than expected averaging 38fps 1st ..pass and 32 fps .... second pass.

I ussually use the Automatic quality settings and my 1.5 hr comparison was with the 1090T OC'd to 4200ghz where I was averaging 48fps 1st pass and 42 fps 2nd pass when needed. The last Airbender and Sorcerers Aprentice.

I am stock right now with all 6 core maxed which I couldn't do when OC'd @ 4200 (about 60 - 70%) and have not had time to get the bugs out of the system yet and Asus has left a few in the MB. I found when I upgraded from the 965 also OC'd to 3900 I gained about 10 - 15 fps all around depending on the source. the 1090T loves to be OC'd compared to the 965.
bassnut is offline   Reply With Quote
Old 28th November 2010, 22:06   #10327  |  Link
omegaman7
Registered User
 
omegaman7's Avatar
 
Join Date: Jan 2010
Location: USA, Oregon
Posts: 791
Thanks for the info. I generally don't like running long processes on my primary machine(Phenom 965). But perhaps in the not too distant future, I can retire 940(sell on ebay), and purchase 1090t. Really depends on Bulldozers cost, and how much money I can make over the next month. Hopefully I pick up some overtime
omegaman7 is offline   Reply With Quote
Old 28th November 2010, 23:20   #10328  |  Link
Sharc
Registered User
 
Join Date: May 2006
Posts: 3,810
When I select 'Alternate Output' and for example one of the MKV containers, I can activate both 'Constant Rate Factor Output (CRF)' AND 'Two Pass Bitrate Encoding'. I thought the 2 should be exclusive.

When I unselect 'Constant Rate Factor Output (CRF)' and select 'Two Pass Bitrate Encoding', I cannot edit the target bitrate, but only the CRF.

Is this a bug?
Sharc is offline   Reply With Quote
Old 29th November 2010, 01:01   #10329  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by Sharc View Post
When I select 'Alternate Output' and for example one of the MKV containers, I can activate both 'Constant Rate Factor Output (CRF)' AND 'Two Pass Bitrate Encoding'. I thought the 2 should be exclusive.

When I unselect 'Constant Rate Factor Output (CRF)' and select 'Two Pass Bitrate Encoding', I cannot edit the target bitrate, but only the CRF.

Is this a bug?
It must be... I'll check it out. You obviously can run both at once.


[Edit] I just tested it, and I can't activate both... the checkbox can only be set on one or the other. You can never edit the bitrate (currently), it is set in the ALTERNATE.TXT file that holds all the profiles. You can always edit the CRF, but it is only applicable if you have CRF encoding selected.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 29th November 2010 at 01:05.
jdobbs is offline   Reply With Quote
Old 29th November 2010, 06:49   #10330  |  Link
MickJT
Registered User
 
Join Date: Apr 2007
Location: Somewhere down under
Posts: 51
Has something changed since the 4th of November, page 502, and now, with the Inspect tool?

I don't think i've ever seen "FFDSHOW_RAW_AUDIO" listed in the Inspect tool, but it's not often I use BD-Rebuilder, and generally it gets removed when i'm done, and a new version is out when I need it again.

FFDSHOW_RAW_AUDIO is not mentioned in the Inspect tool here. Should it be?

Edit: I'm also hesistant to ask this next question, because it's probably been repeated many times. Why is "FFMPEG encoder" unselectable in "Encoder"? Is there any condition in which it is selectable?

Last edited by MickJT; 29th November 2010 at 13:35.
MickJT is offline   Reply With Quote
Old 29th November 2010, 10:39   #10331  |  Link
rilopes
Registered User
 
Join Date: Oct 2001
Location: Sao Paulo - Brasil
Posts: 17
Quote:
Originally Posted by rilopes View Post
Thanks jdobbs !

I tried default settings, but changed a little bit...and it worked ( logs attached ). Burned to a BD-RE and played in my Samsung BD-3600 player.

Toy Story 3 movie has some frames which are specific for each language. So, every time these frames are shown, the image freezes ( not sound ) and is played again seconds later from exactly same point.

I remember some Disney DVD's where it happened too.

May be a BD-rebuilder bug ?

Sorry jdobbs, any comments ? Has anyone been through this ???
rilopes is offline   Reply With Quote
Old 29th November 2010, 14:15   #10332  |  Link
wooper
Registered User
 
Join Date: Feb 2010
Posts: 22
Quote:
Originally Posted by jdobbs View Post
I'd need a lot more information in order to be able to help you, please post your BDREBUILDER.INI, the .INF file for the disc you're processing, and the log from the encode.
Hi here is the log file

Code:
-----------------------
[23:11:53] BD Rebuilder v0.35.01 (beta)
  - Source:  HARRY_POTTER_6
  - Input BD size: 28.97 GB
  - Approximate total content: [03:23:33.284]
  - Target BD size: 22.66 GB
  - Windows Version: 6.1 [7600]
  - Auto Quality: Good (Very Fast), ABR
  - Audio Settings: AC3=1 DTS=1 HD=0 Kbs=640
[23:11:53] PHASE ONE, Encoding
 - [23:11:53] Extracting A/V streams [VID_00067]
 - [23:11:57] Reencoding: VID_00067 (1 of 17)
 - [23:11:57] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 2,824 frames
 - [23:11:57] Reencoding: VID_00067, Pass 1 of 1
 - [23:13:26] Video Encode complete
 - [23:13:26] Reencoding audio tracks (if req'd)
 - [23:13:28] Multiplexing M2TS
 - [23:13:30] Extracting A/V streams [VID_00004]
 - [23:13:34] Reencoding: VID_00004 (2 of 17)
 - [23:13:34] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 2,998 frames
 - [23:13:34] Reencoding: VID_00004, Pass 1 of 1
 - [23:15:08] Video Encode complete
 - [23:15:08] Reencoding audio tracks (if req'd)
 - [23:15:09] Multiplexing M2TS
 - [23:15:11] Extracting A/V streams [VID_00009]
 - [23:15:15] Reencoding: VID_00009 (3 of 17)
 - [23:15:15] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 2,991 frames
 - [23:15:15] Reencoding: VID_00009, Pass 1 of 1
 - [23:16:49] Video Encode complete
 - [23:16:49] Reencoding audio tracks (if req'd)
 - [23:16:51] Multiplexing M2TS
 - [23:16:52] Extracting A/V streams [VID_00072]
 - [23:16:57] Reencoding: VID_00072 (4 of 17)
 - [23:16:57] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 3,021 frames
 - [23:16:57] Reencoding: VID_00072, Pass 1 of 1
 - [23:18:28] Video Encode complete
 - [23:18:28] Reencoding audio tracks (if req'd)
 - [23:18:30] Multiplexing M2TS
 - [23:18:31] Extracting A/V streams [VID_00007]
 - [23:18:35] Reencoding: VID_00007 (5 of 17)
 - [23:18:35] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 3,062 frames
 - [23:18:35] Reencoding: VID_00007, Pass 1 of 1
 - [23:20:13] Video Encode complete
 - [23:20:13] Reencoding audio tracks (if req'd)
 - [23:20:15] Multiplexing M2TS
 - [23:20:17] Extracting A/V streams [VID_00069]
 - [23:20:21] Reencoding: VID_00069 (6 of 17)
 - [23:20:21] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 3,590 frames
 - [23:20:21] Reencoding: VID_00069, Pass 1 of 1
 - [23:22:18] Video Encode complete
 - [23:22:18] Reencoding audio tracks (if req'd)
 - [23:22:19] Multiplexing M2TS
 - [23:22:22] Extracting A/V streams [VID_00010]
 - [23:22:27] Reencoding: VID_00010 (7 of 17)
 - [23:22:27] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 3,154 frames
 - [23:22:27] Reencoding: VID_00010, Pass 1 of 1
 - [23:24:13] Video Encode complete
 - [23:24:13] Reencoding audio tracks (if req'd)
 - [23:24:14] Multiplexing M2TS
 - [23:24:17] Extracting A/V streams [VID_00680]
 - [23:24:29] Reencoding: VID_00680 (8 of 17)
 - [23:24:29] Reencoding secondary video [TRK_02]
 - [23:25:17] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 14,498 frames
 - [23:25:17] Reencoding: VID_00680, Pass 1 of 1
 - [23:31:08] Video Encode complete
 - [23:31:08] Reencoding audio tracks (if req'd)
 - [23:31:11] Multiplexing M2TS
 - [23:31:13] Extracting A/V streams [VID_00005]
 - [23:31:17] Reencoding: VID_00005 (9 of 17)
 - [23:31:17] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 3,965 frames
 - [23:31:17] Reencoding: VID_00005, Pass 1 of 1
 - [23:33:25] Video Encode complete
 - [23:33:25] Reencoding audio tracks (if req'd)
 - [23:33:27] Multiplexing M2TS
 - [23:33:30] Extracting A/V streams [VID_00003]
 - [23:33:34] Reencoding: VID_00003 (10 of 17)
 - [23:33:34] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 4,029 frames
 - [23:33:34] Reencoding: VID_00003, Pass 1 of 1
 - [23:35:43] Video Encode complete
 - [23:35:43] Reencoding audio tracks (if req'd)
 - [23:35:45] Multiplexing M2TS
 - [23:35:47] Extracting A/V streams [VID_00006]
 - [23:35:52] Reencoding: VID_00006 (11 of 17)
 - [23:35:52] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 4,075 frames
 - [23:35:52] Reencoding: VID_00006, Pass 1 of 1
 - [23:38:03] Video Encode complete
 - [23:38:03] Reencoding audio tracks (if req'd)
 - [23:38:05] Multiplexing M2TS
 - [23:38:07] Extracting A/V streams [VID_00008]
 - [23:38:12] Reencoding: VID_00008 (12 of 17)
 - [23:38:12] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 4,239 frames
 - [23:38:12] Reencoding: VID_00008, Pass 1 of 1
 - [23:40:30] Video Encode complete
 - [23:40:30] Reencoding audio tracks (if req'd)
 - [23:40:32] Multiplexing M2TS
 - [23:40:34] Extracting A/V streams [VID_00068]
 - [23:40:39] Reencoding: VID_00068 (13 of 17)
 - [23:40:39] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 4,312 frames
 - [23:40:39] Reencoding: VID_00068, Pass 1 of 1
 - [23:42:58] Video Encode complete
 - [23:42:58] Reencoding audio tracks (if req'd)
 - [23:43:00] Multiplexing M2TS
 - [23:43:02] Extracting A/V streams [VID_00071]
 - [23:43:07] Reencoding: VID_00071 (14 of 17)
 - [23:43:07] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 4,942 frames
 - [23:43:07] Reencoding: VID_00071, Pass 1 of 1
 - [23:45:35] Video Encode complete
 - [23:45:35] Reencoding audio tracks (if req'd)
 - [23:45:37] Multiplexing M2TS
 - [23:45:40] Extracting A/V streams [VID_00001]
 - [23:45:46] Reencoding: VID_00001 (15 of 17)
 - [23:45:46] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 4,965 frames
 - [23:45:46] Reencoding: VID_00001, Pass 1 of 1
 - [23:48:24] Video Encode complete
 - [23:48:24] Reencoding audio tracks (if req'd)
 - [23:48:26] Multiplexing M2TS
 - [23:48:29] Extracting A/V streams [VID_00070]
 - [23:48:35] Reencoding: VID_00070 (16 of 17)
 - [23:48:35] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 5,320 frames
 - [23:48:35] Reencoding: VID_00070, Pass 1 of 1
 - [23:51:18] Video Encode complete
 - [23:51:18] Reencoding audio tracks (if req'd)
 - [23:51:21] Multiplexing M2TS
 - [23:51:24] Extracting A/V streams [VID_00000]
 - [00:02:38] Reencoding: VID_00000 (17 of 17)
 - [00:02:38] Reencoding secondary video [TRK_02]
 - [00:24:12] Collecting video information
   - Source Video: VC-1, 1920x1080
   - Rate/Length: 23.976fps, 220,841 frames
   - Bitrate: 15,418 Kbs
 - [00:24:12] Reencoding: VID_00000, Pass 1 of 1
 - [02:40:41] Video Encode complete
 - [02:40:41] Reencoding audio tracks (if req'd)
 - [02:45:41] Multiplexing M2TS
[02:59:15]PHASE ONE complete
[02:59:15]PHASE TWO - Rebuild Started
 - [02:59:15] Rebuilding BD file Structure
[02:59:25] - Encode and Rebuild complete
 - WORKFILES folder removed.
[02:59:27]JOB: HARRY_POTTER_6 finished.
and the rebuilder.ini

Code:
[Options]
MODE=1
ENCODE_QUALITY=1
ONEPASS_ENCODING=0
AUTO_QUALITY=1
TARGET_SIZE=8032
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=0
DTS_REENCODE=1
AC3_REENCODE=1
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=0
REMOVE_WORKFILES=1
MOVIE_ONLY_LOOP=1
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=23450
[Paths]
SOURCE_PATH=T:\PELICULAS BD\DARKN_BD25_WWW.SVERDOS.COM\
WORKING_PATH=T:\PELICULAS BD\DARK KNIGHT RECDIFICADO\

the inf for the disc

[Status]
LABEL=HARRY_POTTER_6
VERSION=v0.35.01 (beta)
SOURCE_SIZE=31102790871
SOURCE_VIDEO_SIZE=30885642240
TARGET_SIZE=24326963200
REDUCTION=.780615613612702
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=all
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
QUICK=1
ENCODE_STEP=0
COMPLETED=17
REBUILD_COMPLETE=1
[00067]
AUDIO=1
PGS=11
M2TS_TARGET=127106304
NSTART=27000000
NEND=32300640
NSIZE=120809472
FLINK=0
MLINK=0
[00004]
AUDIO=1
PGS=11
M2TS_TARGET=133969526
NSTART=27000000
NEND=32627520
NSIZE=127672320
FLINK=0
MLINK=0
[00009]
AUDIO=1
PGS=11
M2TS_TARGET=134075041
NSTART=27000000
NEND=32613120
NSIZE=110739456
FLINK=0
MLINK=0
[00072]
AUDIO=1
PGS=11
M2TS_TARGET=134583427
NSTART=27000000
NEND=32670720
NSIZE=112558080
FLINK=0
MLINK=0
[00007]
AUDIO=1
PGS=11
M2TS_TARGET=136310024
NSTART=27000000
NEND=32747040
NSIZE=131438592
FLINK=0
MLINK=0
[00069]
AUDIO=1
PGS=11
M2TS_TARGET=159556732
NSTART=27000000
NEND=33737760
NSIZE=182212608
FLINK=0
MLINK=0
[00010]
AUDIO=1
PGS=
M2TS_TARGET=178285512
NSTART=27000000
NEND=32919840
NSIZE=227106816
FLINK=0
MLINK=0
[00680]
AUDIO=11
PGS=
M2TS_TARGET=178482152
NSTART=27000000
NEND=54209056
NSIZE=147707904
FLINK=0
MLINK=0
[00005]
AUDIO=1
PGS=11
M2TS_TARGET=178654812
NSTART=27000000
NEND=34441920
NSIZE=156469248
FLINK=0
MLINK=0
[00003]
AUDIO=1
PGS=11
M2TS_TARGET=180995310
NSTART=27000000
NEND=34561440
NSIZE=151007232
FLINK=0
MLINK=0
[00006]
AUDIO=1
PGS=11
M2TS_TARGET=184347785
NSTART=27000000
NEND=34647840
NSIZE=180873216
FLINK=0
MLINK=0
[00008]
AUDIO=1
PGS=11
M2TS_TARGET=190170253
NSTART=27000000
NEND=34956000
NSIZE=206966784
FLINK=0
MLINK=0
[00068]
AUDIO=1
PGS=11
M2TS_TARGET=193503545
NSTART=27000000
NEND=35092800
NSIZE=176019456
FLINK=0
MLINK=0
[00071]
AUDIO=1
PGS=11
M2TS_TARGET=218481646
NSTART=27000000
NEND=36275040
NSIZE=184694784
FLINK=0
MLINK=0
[00001]
AUDIO=1
PGS=11
M2TS_TARGET=222505575
NSTART=27000000
NEND=36318240
NSIZE=211550208
FLINK=0
MLINK=0
[00070]
AUDIO=1
PGS=11
M2TS_TARGET=238874673
NSTART=27000000
NEND=36984960
NSIZE=215482368
FLINK=0
MLINK=0
[00000]
AUDIO=1011
PGS=10110
M2TS_TARGET=21466506025
RATE=15418
NSTART=27000000
NEND=441534240
NSIZE=20569491456
FLINK=0
MLINK=0

and the process is, fullbackup, "Quicker encode extras", encoder "x264 encoder", output options "BD25", verbose status reporting

let me know if you need more info

Last edited by jdobbs; 29th November 2010 at 15:00.
wooper is offline   Reply With Quote
Old 29th November 2010, 14:31   #10333  |  Link
wooper
Registered User
 
Join Date: Feb 2010
Posts: 22
Quote:
Originally Posted by wooper View Post
Hi there, i have a problem with the movie "Harry Potter and the Half-Blood prince", I did a full backup but the weird thing is that BD-Rebuilder doesn't show any error, it just says thats everything went perfect, but when i reproduce the movie in my pc the spanish audio doesn't hear very well, it sounds paused and sometimes slow, so what might be the problem? some settings to change? thanks
the last post is for this problem
wooper is offline   Reply With Quote
Old 29th November 2010, 14:59   #10334  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by MickJT View Post
Has something changed since the 4th of November, page 502, and now, with the Inspect tool?

I don't think i've ever seen "FFDSHOW_RAW_AUDIO" listed in the Inspect tool, but it's not often I use BD-Rebuilder, and generally it gets removed when i'm done, and a new version is out when I need it again.

FFDSHOW_RAW_AUDIO is not mentioned in the Inspect tool here. Should it be?

Edit: I'm also hesistant to ask this next question, because it's probably been repeated many times. Why is "FFMPEG encoder" unselectable in "Encoder"? Is there any condition in which it is selectable?
Ignore it. I've taken it out again.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 29th November 2010, 15:03   #10335  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by wooper View Post
the last post is for this problem
1. You're using an old version that is out of date. There have been four newer releases since then. I only accept bug reports on current versions.

2. Have you tried it on a standalone player? PC codecs and playback can be flakey...

3. It looks like the only language you have selected in SETUP is English.

It could be this (from v0.36.03):
Code:
- Corrected an error in which audio streams that
  contained delays, and were not in the initial
  (SETUP defined) list of selections, could (if
  later selected from the streams list) be muxed
  out-of-sync.
or this if you stopped and started over (from v0.36.01):
Code:
- Corrected an issue in which stopping BD-RB during
  audio encoding would leave the WAVI and AFTEN
  processes running.  As a result, restarting soon
  afterward could cause unpredictable anomalies in
  the audio, including sync and size issues.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 29th November 2010 at 15:12.
jdobbs is offline   Reply With Quote
Old 29th November 2010, 20:05   #10336  |  Link
Sharc
Registered User
 
Join Date: May 2006
Posts: 3,810
Quote:
Originally Posted by jdobbs View Post
It must be... I'll check it out. You obviously can run both at once.


[Edit] I just tested it, and I can't activate both... the checkbox can only be set on one or the other. You can never edit the bitrate (currently), it is set in the ALTERNATE.TXT file that holds all the profiles. You can always edit the CRF, but it is only applicable if you have CRF encoding selected.
Thanks. The double activation was gone after rebooting the system. So something was probably out of order here.
Sharc is offline   Reply With Quote
Old 29th November 2010, 21:05   #10337  |  Link
m.rup
Registered User
 
Join Date: Oct 2005
Posts: 84
BD Rebuilder doesn't like languages other than english

Unfortunately, an encode with version 3604 still shows the problem. I tried it with some other BDs (e.g. Alice in Wonderland), and it worked well. So this seems to be a special problem of the CARS BD.
Besides, is there a way to downgrade to an earlier version of BD-Rebuilder for testing purposes? I tried but got a message that there is anewer version and I should use it.
Attached Files
File Type: txt BD-REBUILDER.INF.TXT (13.6 KB, 5 views)
File Type: 7z BD-REBUILDER.LOG.TXT.7z (21.9 KB, 3 views)
m.rup is offline   Reply With Quote
Old 29th November 2010, 21:12   #10338  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by m.rup View Post
Unfortunately, an encode with version 3604 still shows the problem. I tried it with some other BDs (e.g. Alice in Wonderland), and it worked well. So this seems to be a special problem of the CARS BD.
Besides, is there a way to downgrade to an earlier version of BD-Rebuilder for testing purposes? I tried but got a message that there is anewer version and I should use it.
I tested "CARS" over-and-over and it worked correctly. I've also gotten no other reports of this issue as you've described it from any other users... I'm not sure what else I can do.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 29th November 2010 at 21:16.
jdobbs is offline   Reply With Quote
Old 29th November 2010, 21:17   #10339  |  Link
m.rup
Registered User
 
Join Date: Oct 2005
Posts: 84
Maybe you could tell me how to downgrade, so I can try some earlier version of BD_Rebuilder, and if it works then, maybe the logs could be helpful.
m.rup is offline   Reply With Quote
Old 29th November 2010, 22:55   #10340  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,817
Quote:
Originally Posted by m.rup View Post
Maybe you could tell me how to downgrade, so I can try some earlier version of BD_Rebuilder, and if it works then, maybe the logs could be helpful.
Sorry, but I have to continue to treat this as a beta program -- I make the old versions expire so I don't keep getting reports on things that have been fixed. I have to believe that the copy of "CARS" you have is corrupted -- because your report is the only one in which there is an issue. An old version isn't going to act any differently.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:36.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.