Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
31st March 2019, 11:19 | #55581 | Link | |
Registered User
Join Date: Mar 2009
Posts: 3,650
|
I'll put my vote in for lTSC 2019.
Quote:
If I lower queues to standard 16/8 my fan speed drops to nothing, my clocks lower, GPU usage is higher as a result and predicted wattage is around 10% with my setup as it is on Full HD content. If I increase this to 32/16 my fan speed is now 20% my clocks are higher, GPU usage is lower but predicted watts are almost twice that of the standard queues. Last edited by ryrynz; 31st March 2019 at 11:36. |
|
31st March 2019, 12:33 | #55582 | Link |
Registered User
Join Date: Sep 2011
Posts: 48
|
Thanks! Any specific things I need to keep in mind like which driver version,any windows display settings & any win 10 specific madvr optimization. My tv is 1080p60Hz non-hdr & I currently use smooth motion option & most of my media is 720p/1080p SDR 23.76fps.
|
31st March 2019, 12:45 | #55583 | Link |
Registered User
Join Date: Mar 2002
Posts: 2,323
|
I vote for ltsb 2016, that's what I use and I don't upgrade it until LAV or madVR requires it.
The reason behind this is MS breaks stuff with every new version, so your older utils that you may use and haven't been updated for a while may break too. (E.g. Winaero Theme Switcher) Since you (will) have a Pascal card just use the old 385.28 driver.
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config Last edited by chros; 31st March 2019 at 18:36. |
31st March 2019, 12:55 | #55584 | Link |
Registered User
Join Date: Mar 2009
Posts: 3,650
|
Wait to see what others recommend, for drivers see if the latest works for you without issues, and stick with it until such time you feel it's worthwhile to upgrade and are prepared to take time to test it. The latest 419.67 apparently seems to be fine for the 10 series but 385.28 is the least problematic at time of writing.
Display settings, just what others have said.. Adaptive power mode and disable Focus Assist, pretty much everything else I can think of is fine with defaults. A 1050 is likely to have less issues with drivers (like the stuttering of recent drivers on some the newer cards) If you can do 24Hz on your TV and create a display custom mode for it in madVR you may find that delivers the best experience, assess it vs your current setup with Smooth Motion enabled and decide for yourself. Last edited by ryrynz; 31st March 2019 at 21:31. |
31st March 2019, 18:37 | #55587 | Link |
Registered User
Join Date: Mar 2002
Posts: 2,323
|
385.28, I managed to screw it up, sorry.
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config |
31st March 2019, 19:33 | #55588 | Link | |
Registered User
Join Date: Sep 2007
Posts: 27
|
Quote:
I tried downgrading drivers, but older drivers simply won't detect the 1660 as a compatible card. I'm totally pulling my hair out as my HTPC is pretty much garbage with UHD 4k content at this point. Last edited by katodevin; 31st March 2019 at 20:42. |
|
31st March 2019, 21:13 | #55590 | Link |
Registered User
Join Date: Oct 2016
Posts: 896
|
If you want to keep the same Windows version for a long time (how long exactly?) but also upgrade to a more recent graphics card later, be aware that later hardware may need a minimum Windows 10 version to work. For example GeForce 20 series released 09/2018 need Windows 1709 minimum someone using LTSC 2016 would be out of luck. An hypothetical GeForce 21 or 22 series may or may not work on Windows LTSC 2019.
That's interesting. My clocks are basically the same with 16/8 and 32/16, but my card is passively cooled and lower power so maybe the power management is different.
__________________
HTPC: Windows 10 22H2, MediaPortal 1, LAV Filters/ReClock/madVR. DVB-C TV, Panasonic GT60, Denon 2310, Core 2 Duo E7400 oc'd, GeForce 1050 Ti 536.40 |
31st March 2019, 23:49 | #55592 | Link | |
Registered User
Join Date: Aug 2009
Posts: 136
|
Quote:
Right now I'm running 419.67 with an RTX2060 |
|
1st April 2019, 08:18 | #55594 | Link |
Registered User
Join Date: Sep 2007
Posts: 27
|
Windows HDR is off. I'm using MPC-BE and MadVR to pass through HDR to my LG C8. Worked perfect before I upgraded to this 1660 GTX. I've tried both 419.67 and 419.35 (the only 2 drivers that support the 1660 at this point in time). They both have huge stuttering issues. It is a bit strange though, when I initially installed .35 and enabled vsync in Nvidia control panel, everything seemed fine. After a couple of reboots and various video files, the issues came back. Really frustrating!
|
1st April 2019, 09:47 | #55595 | Link |
Registered User
Join Date: Jun 2018
Posts: 5
|
Hoping you guys can help me get deinterlacing working better on my setup. I just ripped my Buffy the Vampire Slayer season 1 NTSC DVDs to MKV files (no re-encoding of video or audio) with MakeMKV and I'm trying to play them back with MPC-HC and madVR (using MPC-HC's internal LAV filters). I don't have much experience at all playing back interlaced content - it's 2019, after all - so bear with me.
My first problem is that I can see a lot of combing artifacts in certain spots, typically in frames with motion that come immediately after a cut: Episode 7 01:00.277, Episode 11 00:11.713. My second problem is that deinterlacing doesn't get activated on 3 out of the 12 episodes according to marVR's OSD. These happen to be the 3 episodes that start with a cold open (straight to the first scene of the episode), rather than the usual intro sequence. If I switch the deinterlacing setting in madVR from "if in doubt, deactivate deinterlacing" to "if in doubt, activate deinterlacing," then deinterlacing is activated on all 12 episodes. Sample clips: First 15 seconds of episode 1, Clip from episode 7 (I see a lot of combing when the guy lights the lighter) One last thing that I've noticed is that in every sequence except for the intro sequence, I get a ton of repeated frames. In fact, when I step through the video frame by frame, every frame is repeated once. LAV Video settings madVR deinterlacing settings |
1st April 2019, 10:15 | #55597 | Link | |
Registered User
Join Date: Mar 2002
Posts: 2,323
|
Quote:
That's the latest one that doesn't brake lot of stuff , not necessarily the best. I wouldn't upgrade if everything works for you now, until you are bored
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config |
|
1st April 2019, 12:01 | #55600 | Link | |
Registered User
Join Date: Dec 2018
Posts: 207
|
Quote:
Last edited by DMU; 1st April 2019 at 12:05. |
|
Tags |
direct compute, dithering, error diffusion, madvr, ngu, nnedi3, quality, renderer, scaling, uhd upscaling, upsampling |
Thread Tools | Search this Thread |
Display Modes | |
|
|