RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[burt123]

Originally Posted by Atak_Snajpera

ipconfig /all and show us what you have there.

What ip is associated by your router? Do you have more than one network card?

Hi Atak,

I can post the ipconfig/all info later, OK.

Ummm, I actually haven't got a router, it's just an 8 port 100/1000Mb hub that "join's" everything.

Some of my PC's "do" have more than 1 onboard NIC, but on the Windows 10 PC, I have disabled the Realtek, and left the Intel enabled.

I was using another Windows 8.1 PC with DE, with no problem, so it's either a Windows 10 thing, or the mobo...haven't used this PC for a while.

I generally only use 1 PC, with all DE servers running within the same PC...works well, makes a huge difference. I just need to have the hub powered up.

I will have a better look tomorrow.

Cheers

[Atak_Snajpera]

Ummm, I actually haven't got a router, it's just an 8 port 100/1000Mb hub that "join's" everything.

Maybe that's the problem here. You do not have device (router) which would control ip association for connected devices (PCs).
Also check what you have in those sections. I have router (IPs are associated with MAC adresses) so I do not have to fill in anything.

[burt123]

Originally Posted by Atak_Snajpera

Maybe that's the problem here. You do not have device (router) which would control ip association for connected devices (PCs).
Also check what you have in those sections. I have router (IPs are associated with MAC adresses) so I do not have to fill in anything.

OK, well, I haven't had this problem with any other PC's, so it must be a Windows 10 hiccup, but to answer your question....

No, I do not have device (router) which would control ip association for connected devices (PCs).

I just slightly change the IP addresses, on the other PC's, seems to work fine for "normal" networking.

So on the PC in question, the settings are :-

IP is 192.168.0.3
Subnet 255.255.255.0
No Gateway
Preferred DNS 208.67.222.222
Alt DNS 208.67.220.220

[burt123]

Hi Atak,

So I checked ipconfig/all, and found a Tunnel TAP adaptor that had DHCP enabled, which generated that IP of 192.55.233.2, so I had several failed attempts at deleting/disabling it, but with no success, then I noticed an Intel TAP entry in Device Manager, it was a hidden device, so I uninstalled that, rebooted, it all came back, so then I switched from the onboard Intel NIC, to the Realtek NIC, and now everything is working.

I have a theory on what might have happened, but I would need to do a fresh clean install on Windows 10, and I can't be bothered, as the final release is "just around the corner".

I really appreciate your input & suggestions, it lead me in the right direction, to get it working.

I am currently DE'ing with the PC I couldn't connect to, yesterday.

Many thanks

[Reveal]

This is the first time I have a problem with Ripbot.

It seems only to affect this movie: The man with the iron fists uncut version region B. 5053083037550

Ripbot stops after first or second pass. No error message.
HDD > Blu-ray > mkv. Windows 8.1 X64 / Ripbot 1.18.3

If I roll back to 1.18.1, it´s working again.
Same settings.

[soneca]

Originally Posted by Reveal

This is the first time I have a problem with Ripbot.

It seems only to affect this movie: The man with the iron fists uncut version region B. 5053083037550

Ripbot stops after first or second pass. No error message.
HDD > Blu-ray > mkv. Windows 8.1 X64 / Ripbot 1.18.3

If I roll back to 1.18.1, it´s working again.
Same settings.

Replace with this RipBot264.exe to solve. http://forum.doom9.org/showthread.ph...51#post1728651

[agressiv]

Curious why you even use avs2avi.exe with how slow it is compared to Mediainfo.dll? Is Mediainfo.dll unreliable? I haven't used the DLL personally but I've scripted the CLI version and it's very fast.

[Atak_Snajpera]

I need to know what avisynth exactly knows about opened script. Number of frames reported by decoder,fps and so on. MediaInfo will never give me that accurate information.
Gathering information on my machine takes few seconds. No idea why this takes minutes on your side.

[agressiv]

Again, avs2avi.exe is scanning the entire Audio file. In my latest Movie (Dances with Wolves) - that .dts file is 8.5gb. It took about 3 minutes to scan that on an SSD. MediaInfo scans it in a half a second. Crop the movie, and it scans the whole audio file again (3 more minutes)

Yes, it's lightning fast with SD content, but I rarely am ever dealing with that. On Blu-rays, every audio file is lossless - many are 4gb+ in size.

Avs2Avi is over 10 years old. Guess I'll see if I can find something other than mediaInfo which might do the job. Maybe ffprobe? I know it can do similar functions as well.


Detailed:
Start AVS2AVI - 0m
Log outputs to console - 1m 5 sec
File scans again - 1m 40sec

Total time 2min 45sec

Total throughput is 24k IOPS. My SSD is going absolutely nuts.

Edit: It's NicAudio.dll which is causing the file scanning.
DirectshowSource on the DTS works but shows an incorrect length (large negative number) in info.txt
uNicAudio.dll behaves the same as NicAudio.dll
Tried NicAudio.dll version 2.06, same behavior.
Directshowsource on the source MKV works. Obviously not ideal.

[sneaker_ger]

Lossless compressed audio has a variable bitrate. If it's not in an container that supplies total duration (like mkv) it has to be scanned to get the correct duration (and AviSynth needs duration at script loading time, cannot be changed dynamically, I think).
But does NicAudio even do DTS-HD/TrueHD? I don't know if it's the best choice source filter in this case.

[Atak_Snajpera]

nicaudio does not see hd part. Only core is decoded.

[Vereor]

Originally Posted by Atak_Snajpera

Vereor
This should help

Hi Atak_Snajpera, I just wanted to confirm that your new EncodingClient.exe fixed the problem.

I posted back on the day, but because I quoted your link I think the post was not approved.

Thanks again.

[Reveal]

Tnx for your help.

Originally Posted by soneca

Replace with this RipBot264.exe to solve. http://forum.doom9.org/showthread.ph...51#post1728651

[squezer]

Hi, Atak,

I have a strange problem - I upgraded recently from 1.18.1 to 1.18.3 and now encoding of this audio to aac (MOV from camera)

Audio
ID : 2
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : sowt
Duration : 8s 775ms
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 1.61 MiB (2%)
Language : English

is skipped silently and output mkv is not created at all...
I tried to copy only new ripbot.exe into old directory - the problem is here.
Old ripbot.exe with new stuff - encoded_aac is created, output mkv is here.
Any help, please?

[Atak_Snajpera]

see log file for details.

[squezer]

strangely, there is not any note about audio...

F:\>"C:\Program Files (x86)\RipBot264\tools\avs2yuv\avs2yuv.exe" "F:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\Program Files (x86)\RipBot264\tools\x264\x264_x64.exe" --pass 1 --bitrate 4096 --stats "F:\Temp\RipBot264temp\job1\job1.stats" --fps 30000/1001 --force-cfr --min-keyint 30 --keyint 300 --frames 263 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --b-pyramid none --stdin y4m --output NUL -
y4m [info]: 1920x1080p 1:1 @ 5000000/166833 fps (cfr)
x264 [info]: using SAR=1/1
x264 [warning]: VBV bitrate (25000) > level limit (20000)
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
x264 [info]: profile Main, level 4.0
F:\Temp\RipBot264temp\job1\job1.avs: 1920x1080, 5000000/166833 fps, 264 frames

x264 [info]: frame I:3 Avg QP:24.94 size:151261
x264 [info]: frame P:143 Avg QP:28.72 size: 25265
x264 [info]: frame B:117 Avg QP:31.79 size: 3668
x264 [info]: consecutive B-frames: 20.5% 54.0% 19.4% 6.1%
x264 [info]: mb I I16..4: 25.7% 0.0% 74.3%
x264 [info]: mb P I16..4: 10.1% 0.0% 0.0% P16..4: 58.6% 0.0% 0.0% 0.0% 0.0% skip:31.3%
x264 [info]: mb B I16..4: 0.9% 0.0% 0.0% B16..8: 14.5% 0.0% 0.0% direct: 4.7% skip:79.9% L0:26.6% L1:69.3% BI: 4.1%
x264 [info]: final ratefactor: 25.83
x264 [info]: coded y,uvDC,uvAC intra: 33.7% 44.3% 7.2% inter: 13.7% 6.3% 0.0%
x264 [info]: i16 v,h,dc,p: 26% 45% 21% 8%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 17% 17% 13% 9% 10% 11% 8% 8% 7%
x264 [info]: i8c dc,h,v,p: 52% 35% 9% 4%
x264 [info]: Weighted P-Frames: Y:30.8% UV:0.0%
x264 [info]: kb/s:4098.59

encoded 263 frames, 72.37 fps, 4098.59 kb/s

F:\>"C:\Program Files (x86)\RipBot264\tools\avs2yuv\avs2yuv.exe" "F:\Temp\RipBot264temp\job1\job1.avs" -o - | "C:\Program Files (x86)\RipBot264\tools\x264\x264_x64.exe" --pass 2 --bitrate 4096 --stats "F:\Temp\RipBot264temp\job1\job1.stats" --fps 30000/1001 --force-cfr --min-keyint 30 --keyint 300 --frames 263 --sar 1:1 --level 4.0 --aud --nal-hrd vbr --vbv-bufsize 25000 --vbv-maxrate 25000 --b-pyramid none --stdin y4m --output "F:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x1080p 1:1 @ 5000000/166833 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
x264 [info]: profile High, level 4.0
F:\Temp\RipBot264temp\job1\job1.avs: 1920x1080, 5000000/166833 fps, 264 frames

x264 [info]: frame I:3 Avg QP:26.36 size:129316
x264 [info]: frame P:143 Avg QP:29.05 size: 25082
x264 [info]: frame B:117 Avg QP:31.82 size: 4029
x264 [info]: consecutive B-frames: 20.5% 54.0% 19.4% 6.1%
x264 [info]: mb I I16..4: 6.0% 78.2% 15.8%
x264 [info]: mb P I16..4: 2.4% 8.9% 0.6% P16..4: 42.7% 7.1% 4.8% 0.0% 0.0% skip:33.6%
x264 [info]: mb B I16..4: 0.2% 0.2% 0.0% B16..8: 28.4% 0.6% 0.2% direct: 1.0% skip:69.3% L0:28.1% L1:70.7% BI: 1.2%
x264 [info]: 8x8 transform intra:75.0% inter:80.5%
x264 [info]: coded y,uvDC,uvAC intra: 48.8% 54.7% 9.2% inter: 14.7% 9.0% 0.0%
x264 [info]: i16 v,h,dc,p: 11% 64% 10% 15%
x264 [info]: i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 22% 25% 4% 6% 5% 9% 5% 7%
x264 [info]: i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 18% 11% 6% 13% 11% 12% 6% 8%
x264 [info]: i8c dc,h,v,p: 57% 29% 10% 4%
x264 [info]: Weighted P-Frames: Y:31.5% UV:0.0%
x264 [info]: ref P L0: 69.3% 19.6% 7.4% 3.1% 0.5%
x264 [info]: ref B L0: 94.8% 5.2%
x264 [info]: kb/s:4053.16

encoded 263 frames, 24.50 fps, 4053.16 kb/s

F:\>"C:\Program Files (x86)\RipBot264\tools\mkvtoolnix\mkvmerge.exe" -o "D:\2015-07-01_6379.mkv" --compression 0:none --title "2015-07-01_6379" --default-duration 0:30000/1001fps "F:\Temp\RipBot264temp\video.264" --compression 0:none --language 0:und --aac-is-sbr 0:0 "F:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac"
mkvmerge v8.1.0 ('Psychedelic Postcard') 64bit
Error: The file 'F:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac' could not be opened for reading: open file error.
-------------------------

Elapsed Time: 00h:00m:15s

[Atak_Snajpera]

have you tried this file http://forum.doom9.org/showthread.ph...09#post1729209

[squezer]

yes, i did

[Atak_Snajpera]

run manually job1_EncodeAudio1.cmd and show output.

[squezer]

here you are

f:\Temp\RipBot264temp\job1>job1_EncodeAudio1.cmd

f:\Temp\RipBot264temp\job1>"C:\Program Files (x86)\RipBot264\tools\avs2pipemod\avs2pipemod.exe" -wav "F:\Temp\RipBot264temp\job1\job1_AUDIO1.avs" | "C:\Progra
m Files (x86)\RipBot264\Tools\fhgaacenc\fhgaacenc.exe" --profile lc --cbr 128 --adts --ignorelength --quiet - "F:\Temp\RipBot264temp\job1\Encoded_Audio_1.aac"
avs2pipemod[error]: Script error: the named argument "length" was passed more than once to BlankClip
(F:\Temp\RipBot264temp\job1\job1_AUDIO1.avs, line 6)

job1_AUDIO1.avs

#MT


#VideoSource

video=BlankClip(length=264, width=1920, height=1080, fps=29,97, pixel_type="YV12", channels=0)

#Deinterlace



#Decimate



#Crop



#Resize



#Colors



#Denoise




#Subtitles



#AudioSource
Import("F:\Temp\RipBot264temp\job1\job1_a1.avs")


#Triming



#AVSameLength



#ColorSpace