Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > (HD) DVD, Blu-ray & (S)VCD > DVD Rebuilder

Reply
 
Thread Tools Search this Thread Display Modes
Old 15th December 2012, 19:25   #16281  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
@gonca

You are wasting your time, he wants to prove he is correct no matter how much you try to argue to the contrary.

@gkn

Once again. If you are outputting to DVD+-R the default format is going to be AVCHD. That's because AVCHD is supported on virtually every player on the planet. BD-9, however, is supported only on a select few. So it would be incredibly silly to output to a format in movie-only mode that will likely result in thousands of complaints about how it doesn't work on a lot of players. This is especially true since there is absolutely no reason to do so when the output is movie-only. So all DVD+-R output is AVCHD as a default. The exception (and thus the word "default") is when you do a full-backup -- and that is because it is required for a full-backup.

The strict AVCHD setting has an entirely different purpose than choosing AVCHD format -- and that is documented in this thread.

In other words, this isn't an issue. It works completely as it should, and no matter how many times you post unusually long posts to make a point -- it is going to stay that way. I'm not going to respond to hundreds of bug reports and get bad reviews just so you can save reencoding time on an extremely rare MPEG-2 source.

If I had looked closer at your log I could have said "definitely" instead of "probably" -- but you've derived way too much assumption out of that single word. I've removed it from my response.

I will check to see if there is an issue with FORCE_NOENCODE when used for BD-25 output. But based on your post #16274 I believe it is.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 15th December 2012 at 20:27.
jdobbs is offline   Reply With Quote
Old 15th December 2012, 19:41   #16282  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by gkn View Post
You know, that is really unnecessary.
It is necessary, I now have two additional pages of long-winded diatribe clogging up an already long thread that is meant to be used for simple bug reports -- I gave you an answer that you just don't want to accept. I realize you want to be right. Everybody does. But at some point you have to just accept the facts as they are and move on...
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 15th December 2012 at 19:44.
jdobbs is offline   Reply With Quote
Old 15th December 2012, 23:31   #16283  |  Link
Ch3vr0n
Registered User
 
Join Date: Jan 2009
Posts: 1,283
ey, it's your thread jdobbs. I'd split the non-bug related "crap"
Ch3vr0n is offline   Reply With Quote
Old 16th December 2012, 00:43   #16284  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
BD Rebuilder v0.42.06 (beta)

I have updated the first thread of this post with links to a new version of BD-RB (v0.42.06). Changes for this release:
Code:
- Added information to the video import routine
  so it would properly handle AVI files with the
  "DX50" fourcc value.
- Updated video file imports so that SRT streams
  contained in MKV files will be included in the
  pseudo source muxing.
- Corrected an error in which forced subtitles
  were not being carried over into ALTERNATE 
  movie-only DVD output.
- Created a hidden option OUTPUT_FOLDER that can
  be used to redirect the final output build to a 
  location other than the working folder. See the 
  file HIDDENOPTS.TXT for usage details.
- Updated BD-RB and INSPECT to accept an newer
  version of FFDSHOW (r4422) as "correct".
- Updated the included version of X264.EXE to the
  latest release (r2230).
- Updated the included version of X264-64.EXE to 
  the latest release (r2230).
- Other minor corrections and cosmetic fixes.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 16th December 2012, 01:00   #16285  |  Link
Ch3vr0n
Registered User
 
Join Date: Jan 2009
Posts: 1,283
sweet. Thanks for the output option. While it's no navigatable folder like the source or working path. Its a reroute for the final output. It'll work just the same. Thx alot
Ch3vr0n is offline   Reply With Quote
Old 16th December 2012, 01:01   #16286  |  Link
Nico8583
Registered User
 
Join Date: Jan 2010
Location: France
Posts: 721
Quote:
Originally Posted by jdobbs View Post
I have updated the first thread of this post with links to a new version of BD-RB (v0.42.06). Changes for this release:
Code:
- Added information to the video import routine
  so it would properly handle AVI files with the
  "DX50" fourcc value.
- Updated video file imports so that SRT streams
  contained in MKV files will be included in the
  pseudo source muxing.
- Corrected an error in which forced subtitles
  were not being carried over into ALTERNATE 
  movie-only DVD output.
- Created a hidden option OUTPUT_FOLDER that can
  be used to redirect the final output build to a 
  location other than the working folder. See the 
  file HIDDENOPTS.TXT for usage details.
- Updated BD-RB and INSPECT to accept an newer
  version of FFDSHOW (r4422) as "correct".
- Updated the included version of X264.EXE to the
  latest release (r2230).
- Updated the included version of X264-64.EXE to 
  the latest release (r2230).
- Other minor corrections and cosmetic fixes.
Thanks for this release, I'll test tomorrow :-)
Do you include a correction for multi angle ?
Edit : do we could upgrade to the new version of FFDShow ?

Last edited by Nico8583; 16th December 2012 at 01:03.
Nico8583 is offline   Reply With Quote
Old 16th December 2012, 01:15   #16287  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by Nico8583 View Post
Thanks for this release, I'll test tomorrow :-)
Do you include a correction for multi angle ?
Edit : do we could upgrade to the new version of FFDShow ?
No changes made for multi-angle selection. That will have to wait until the next release. I just wanted to get this out before the holidays -- and I have another project that has to take priority for the next couple of weeks.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 16th December 2012, 01:28   #16288  |  Link
Ch3vr0n
Registered User
 
Join Date: Jan 2009
Posts: 1,283
Since the ffdshow link got updated to 4422 pretty safe to assume you can update. I did :-)

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk
Ch3vr0n is offline   Reply With Quote
Old 16th December 2012, 01:31   #16289  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by Ch3vr0n View Post
Since the ffdshow link got updated to 4422 pretty safe to assume you can update. I did :-)

Verstuurd van mijn HTC Sensation XE with Beats Audio Z715e met Tapatalk
I've been using that one for a few months now with no issues.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 16th December 2012, 01:37   #16290  |  Link
omegaman7
Registered User
 
omegaman7's Avatar
 
Join Date: Jan 2010
Location: USA, Oregon
Posts: 791
I used to use Ripbot264 for certain abilities. Which requires a newer version of FFDshow. But since Bd Rebuilder has allowed output to Dvd, as well as a wonderful import function, I haven't seen the need. The newer version worked just fine with Bd Rebuilder. If I had had any issues, I obviously would have rolled back to the trusted version on page 1. BEFORE posting a bug report
__________________
Only one rooster, need be in the hen house...
omegaman7 is offline   Reply With Quote
Old 16th December 2012, 01:39   #16291  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by omegaman7 View Post
I used to use Ripbot264 for certain abilities. Which requires a newer version of FFDshow. But since Bd Rebuilder has allowed output to Dvd, as well as a wonderful import function, I haven't seen the need. The newer version worked just fine with Bd Rebuilder. If I had had any issues, I obviously would have rolled back to the trusted version on page 1. BEFORE posting a bug report
That's exactly how I'd lke it to work. I don't want to forbid using a newer version -- but I can't respond to bug reports unless a recommended is used.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 16th December 2012, 01:50   #16292  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by Ch3vr0n View Post
sweet. Thanks for the output option. While it's no navigatable folder like the source or working path. Its a reroute for the final output. It'll work just the same. Thx alot
My biggest mistake with DVD Rebuilder was making it too complicated by adding everything that was asked and crowding up the user interface & menus. So I decided that I'd take a different approach with BD Rebuilder. I won't ignore feature requests, but if I think they're not necessarily something that would benefit everyone or aren't major improvements -- they will be implemented in a less instrusive way, as a hidden option.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 16th December 2012 at 01:59.
jdobbs is offline   Reply With Quote
Old 16th December 2012, 04:25   #16293  |  Link
soneca
Registered User
 
Join Date: Feb 2008
Location: Brazil
Posts: 753
Thanks for the new version!
soneca is offline   Reply With Quote
Old 16th December 2012, 13:10   #16294  |  Link
wakko709
Registered User
 
Join Date: Sep 2011
Posts: 87
Code:
----------------------
[12/15/12] BD Rebuilder v0.42.04 (beta)
[16:02:28] Source:  DARK_SHADOWS
  - Input BD size: 23.82 GB
  - Approximate total content: [02:18:35.390]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7600]
  - Auto Quality: Good (Very Fast), ABR
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[16:02:31] PHASE ONE, Encoding
 - [16:02:31] Processing: VID_00058 (8 of 8)
 - [16:02:31] Extracting A/V streams [VID_00058]
[16:02:57]PHASE ONE aborted by user request
----------------------
[12/15/12] BD Rebuilder v0.42.04 (beta)
[16:03:00] Source:  DARK_SHADOWS
  - Input BD size: 23.82 GB
  - Approximate total content: [02:18:35.390]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7600]
  - Auto Quality: Good (Very Fast), ABR
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[16:03:03] PHASE ONE, Encoding
 - [16:03:03] Processing: VID_00015 (1 of 8)
 - [16:03:03] Extracting A/V streams [VID_00015]
 - [16:07:16] Reencoding video [VID_00015]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 8,159 frames
   - Bitrate: 3,751 Kbs
 - [16:07:16] Reencoding: VID_00015, Pass 1 of 1
 - [16:10:31] Video Encode complete
 - [16:10:31] Processing audio tracks
 - [16:10:31] Multiplexing M2TS
 - [16:10:42] Processing: VID_00031 (2 of 8)
 - [16:10:42] Extracting A/V streams [VID_00031]
 - [16:14:38] Reencoding video [VID_00031]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 2,689 frames
   - Bitrate: 11,083 Kbs
 - [16:14:38] Reencoding: VID_00031, Pass 1 of 1
 - [16:19:10] Video Encode complete
 - [16:19:10] Processing audio tracks
   - Track 4352 (spa): Keeping original audio
 - [16:19:10] Multiplexing M2TS
 - [16:19:20] Processing: VID_00036 (3 of 8)
 - [16:19:20] Extracting A/V streams [VID_00036]
 - [16:22:13] Reencoding video [VID_00036]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 2,627 frames
   - Bitrate: 9,259 Kbs
 - [16:22:13] Reencoding: VID_00036, Pass 1 of 1
 - [16:26:06] Video Encode complete
 - [16:26:06] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [16:26:06] Multiplexing M2TS
 - [16:26:16] Processing: VID_00054 (4 of 8)
 - [16:26:16] Extracting A/V streams [VID_00054]
 - [16:31:32] Reencoding video [VID_00054]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,601 frames
   - Bitrate: 9,203 Kbs
 - [16:31:32] Reencoding: VID_00054, Pass 1 of 1
 - [16:37:13] Video Encode complete
 - [16:37:13] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [16:37:13] Multiplexing M2TS
 - [16:37:24] Processing: VID_00055 (5 of 8)
 - [16:37:24] Extracting A/V streams [VID_00055]
 - [16:41:46] Reencoding video [VID_00055]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,697 frames
   - Bitrate: 9,254 Kbs
 - [16:41:46] Reencoding: VID_00055, Pass 1 of 1
 - [16:57:54] Video Encode complete
 - [16:57:54] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [16:57:54] Multiplexing M2TS
 - [16:58:14] Processing: VID_00056 (6 of 8)
 - [16:58:14] Extracting A/V streams [VID_00056]
 - [17:03:02] Reencoding video [VID_00056]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,366 frames
   - Bitrate: 10,986 Kbs
 - [17:03:02] Reencoding: VID_00056, Pass 1 of 1
 - [17:07:42] Video Encode complete
 - [17:07:42] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [17:07:42] Multiplexing M2TS
 - [17:07:49] Processing: VID_00057 (7 of 8)
 - [17:07:49] Extracting A/V streams [VID_00057]
 - [17:11:12] Reencoding video [VID_00057]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,409 frames
   - Bitrate: 8,941 Kbs
 - [17:11:12] Reencoding: VID_00057, Pass 1 of 1
 - [22:28:05] Video Encode complete
 - [22:28:05] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:28:05] Multiplexing M2TS
 - [22:28:29] Processing: VID_00058 (8 of 8)
 - [22:28:29] Extracting A/V streams [VID_00058]
 - [05:05:50] DoEncoding() 00052  1606
[05:06:35] - Failed to complete.
_____________________________
----------------------
[12/15/12] BD Rebuilder v0.42.04 (beta)
[16:02:28] Source:  DARK_SHADOWS
  - Input BD size: 23.82 GB
  - Approximate total content: [02:18:35.390]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7600]
  - Auto Quality: Good (Very Fast), ABR
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
- Resuming from previously started job.
[16:02:31] PHASE ONE, Encoding
 - [16:02:31] Processing: VID_00058 (8 of 8)
 - [16:02:31] Extracting A/V streams [VID_00058]
[16:02:57]PHASE ONE aborted by user request
----------------------
[12/15/12] BD Rebuilder v0.42.04 (beta)
[16:03:00] Source:  DARK_SHADOWS
  - Input BD size: 23.82 GB
  - Approximate total content: [02:18:35.390]
  - Target BD size: 22.95 GB
  - Windows Version: 6.1 [7600]
  - Auto Quality: Good (Very Fast), ABR
  - Decoding/Frame serving: DirectShow
  - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[16:03:03] PHASE ONE, Encoding
 - [16:03:03] Processing: VID_00015 (1 of 8)
 - [16:03:03] Extracting A/V streams [VID_00015]
 - [16:07:16] Reencoding video [VID_00015]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 8,159 frames
   - Bitrate: 3,751 Kbs
 - [16:07:16] Reencoding: VID_00015, Pass 1 of 1
 - [16:10:31] Video Encode complete
 - [16:10:31] Processing audio tracks
 - [16:10:31] Multiplexing M2TS
 - [16:10:42] Processing: VID_00031 (2 of 8)
 - [16:10:42] Extracting A/V streams [VID_00031]
 - [16:14:38] Reencoding video [VID_00031]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 2,689 frames
   - Bitrate: 11,083 Kbs
 - [16:14:38] Reencoding: VID_00031, Pass 1 of 1
 - [16:19:10] Video Encode complete
 - [16:19:10] Processing audio tracks
   - Track 4352 (spa): Keeping original audio
 - [16:19:10] Multiplexing M2TS
 - [16:19:20] Processing: VID_00036 (3 of 8)
 - [16:19:20] Extracting A/V streams [VID_00036]
 - [16:22:13] Reencoding video [VID_00036]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 2,627 frames
   - Bitrate: 9,259 Kbs
 - [16:22:13] Reencoding: VID_00036, Pass 1 of 1
 - [16:26:06] Video Encode complete
 - [16:26:06] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [16:26:06] Multiplexing M2TS
 - [16:26:16] Processing: VID_00054 (4 of 8)
 - [16:26:16] Extracting A/V streams [VID_00054]
 - [16:31:32] Reencoding video [VID_00054]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,601 frames
   - Bitrate: 9,203 Kbs
 - [16:31:32] Reencoding: VID_00054, Pass 1 of 1
 - [16:37:13] Video Encode complete
 - [16:37:13] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [16:37:13] Multiplexing M2TS
 - [16:37:24] Processing: VID_00055 (5 of 8)
 - [16:37:24] Extracting A/V streams [VID_00055]
 - [16:41:46] Reencoding video [VID_00055]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,697 frames
   - Bitrate: 9,254 Kbs
 - [16:41:46] Reencoding: VID_00055, Pass 1 of 1
 - [16:57:54] Video Encode complete
 - [16:57:54] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [16:57:54] Multiplexing M2TS
 - [16:58:14] Processing: VID_00056 (6 of 8)
 - [16:58:14] Extracting A/V streams [VID_00056]
 - [17:03:02] Reencoding video [VID_00056]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,366 frames
   - Bitrate: 10,986 Kbs
 - [17:03:02] Reencoding: VID_00056, Pass 1 of 1
 - [17:07:42] Video Encode complete
 - [17:07:42] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [17:07:42] Multiplexing M2TS
 - [17:07:49] Processing: VID_00057 (7 of 8)
 - [17:07:49] Extracting A/V streams [VID_00057]
 - [17:11:12] Reencoding video [VID_00057]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23.976fps, 3,409 frames
   - Bitrate: 8,941 Kbs
 - [17:11:12] Reencoding: VID_00057, Pass 1 of 1
 - [22:28:05] Video Encode complete
 - [22:28:05] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [22:28:05] Multiplexing M2TS
 - [22:28:29] Processing: VID_00058 (8 of 8)
 - [22:28:29] Extracting A/V streams [VID_00058]
 - [05:05:50] DoEncoding() 00052  1606
[05:06:35] - Failed to complete.

Last edited by jdobbs; 16th December 2012 at 14:38.
wakko709 is offline   Reply With Quote
Old 16th December 2012, 13:14   #16295  |  Link
wakko709
Registered User
 
Join Date: Sep 2011
Posts: 87
- Windows Version: 6.1 [7600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- AnyDVD settings check: Ok.
- BD Rebuilder v0.42.0.4, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
wakko709 is offline   Reply With Quote
Old 16th December 2012, 13:23   #16296  |  Link
gonca
Registered User
 
Join Date: Jul 2012
Location: Scarborough, Canada
Posts: 915
@wakko709
I see that there is a 6 1/2 hours difference between the beginning of extraction and the error.
Try re-ripping the movie.
Are you working directly from the BD disc?
gonca is offline   Reply With Quote
Old 16th December 2012, 17:46   #16297  |  Link
lauguru
Registered User
 
Join Date: May 2004
Posts: 241
hello jdobbs
I worked perfectly in the previous version windows 8 and now with this beta, and installing the updated programs, I have this error



[12/16/12] BD Rebuilder v0.42.06 (beta)
[18:14:21] Source: Enemy At The Gates 2001 Blu-ray 1080p AVC
- Input BD size: 41,04 GB
- Approximate total content: [03:13:30.254]
- Target BD size: 24,33 GB
- Windows Version: 6.2 [9200]
- MOVIE and MENUS mode enabled
- Quality: Ultra High Quality (Extremely Slow), Two Pass
- Decoding/Frame serving: X264/LAVF [4-way]
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[18:14:37] PHASE ONE, Encoding
- [18:14:37] Blanking: VID_00000 (1 of 77)
- [18:14:37] Processing: VID_00001 (2 of 77)
- [18:14:37] Extracting A/V streams [VID_00001]
- [18:28:57] Reencoding video [VID_00001]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23,976fps, 188.592 frames
- Bitrate: 19.107 Kbs
- [18:28:57] Reencoding: VID_00001, Pass 1 of 2
- Encode failed. Aborting.
- BD-Rebuilder v0.42.06 (beta)
- Windows Version: 6.2 [9200]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 4422, Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok



*just replace X264.EXE X264-64.EXE file (r2230) files for the previous beta version v0.42.04 (Version r2216)and now it works. So the problem comes with the new version (r2230) of x264.exe

Last edited by lauguru; 16th December 2012 at 22:21.
lauguru is offline   Reply With Quote
Old 16th December 2012, 18:36   #16298  |  Link
gg72
Registered User
 
Join Date: Mar 2009
Location: Hungary
Posts: 34
Quote:
Originally Posted by lauguru View Post
installing the updated programs, I have this error
Unfortunately I have also problems (encode failed) with the new version. The same source worked perfectly with the previous version (with the same settings).
gg72 is offline   Reply With Quote
Old 16th December 2012, 19:44   #16299  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by lauguru View Post
hello jdobbs
I worked perfectly in the previous version windows 8 and now with this beta, and installing the updated programs, I have this error


*just replace X264.EXE X264-64.EXE file (r2230) files for the previous beta version v0.42.04 (Version r2216)and now it works. So the problem comes with the new version (r2230) of x264.exe
I can't imagine what could have been introduced in this release of X264 that might have caused it. You might want to right-click and look at the properties and make sure it isn't blocked.

I've been encoding successfully with r2230 since it was released in mid-November.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 16th December 2012, 19:48   #16300  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,316
Quote:
Originally Posted by gg72 View Post
Unfortunately I have also problems (encode failed) with the new version. The same source worked perfectly with the previous version (with the same settings).
Provide some specifics about your system so we can see what might be causing the issue.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:46.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.