x265 3.0 Dolby Vision encoding

[ghostshadow]

Originally Posted by quietvoid

It might be related to the memory, buffer allocations..
My stack size on linux was limited to 8MB, and I was using 4MB in the code.
I have lowered it way down, please try again.

Hello quietvoid, it's good it works, that was it.
Now I'm going to try encoded in x265 and give it this rpu as a parameter. I will let you know

[imhh11]

@quietvoid thanks a lot for your tool. Just for fun, I tried to encode p7 dual-layer bluray to p5 single layer full range. Seems to work well on my bluray player and Nvidia Shield but I don't know if I used proper x265.exe settings.
But I probably should use profile 8 and keep the BL HDR10 compatible.

P5 encoded sample:
https://drive.google.com/file/d/12Cm...ew?usp=sharing

P8 encoded sample:
https://drive.google.com/file/d/1HSe...ew?usp=sharing

Video
ID                                       : 1
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
HDR format                               : Dolby Vision, Version 1.0, dvhe.05.06, BL+RPU
Codec ID                                 : dvhe
Codec ID/Info                            : High Efficiency Video Coding with Dolby Vision
Duration                                 : 1 min 0 s
Bit rate                                 : 8 440 kb/s
Width                                    : 3 840 pixels
Height                                   : 2 160 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 23.976 (24000/1001) FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0 (Type 0)
Bit depth                                : 10 bits
Bits/(Pixel*Frame)                       : 0.042
Stream size                              : 61.2 MiB (100%)
Writing library                          : x265 3.4+26-ga82c6c7a7:[Windows][GCC 10.2.1][64 bit] 10bit
Encoding settings                        : cpuid=1111039 / frame-threads=4 / numa-pools=28 / wpp / no-pmode / no-pme / no-psnr / no-ssim / log-level=2 / input-csp=1 / input-res=3840x2160 / interlace=0 / total-frames=1459 / level-idc=51 / high-tier=1 / uhd-bd=0 / ref=3 / no-allow-non-conformance / repeat-headers / annexb / aud / hrd / info / hash=0 / no-temporal-layers / no-open-gop / min-keyint=23 / keyint=250 / gop-lookahead=0 / bframes=4 / b-adapt=2 / b-pyramid / bframe-bias=0 / rc-lookahead=20 / lookahead-slices=8 / scenecut=40 / hist-scenecut=0 / radl=0 / no-splice / no-intra-refresh / ctu=64 / min-cu-size=8 / no-rect / no-amp / max-tu-size=32 / tu-inter-depth=1 / tu-intra-depth=1 / limit-tu=0 / rdoq-level=0 / dynamic-rd=0.00 / no-ssim-rd / signhide / no-tskip / nr-intra=0 / nr-inter=0 / no-constrained-intra / no-strong-intra-smoothing / max-merge=3 / limit-refs=1 / no-limit-modes / me=1 / subme=2 / merange=57 / temporal-mvp / no-frame-dup / no-hme / weightp / no-weightb / no-analyze-src-pics / deblock=-2:-2 / no-sao / no-sao-non-deblock / rd=3 / selective-sao=0 / early-skip / rskip / no-fast-intra / no-tskip-fast / no-cu-lossless / b-intra / no-splitrd-skip / rdpenalty=0 / psy-rd=2.00 / psy-rdoq=0.00 / no-rd-refine / no-lossless / cbqpoffs=0 / crqpoffs=3 / rc=crf / crf=14.0 / qcomp=0.60 / qpstep=4 / stats-write=0 / stats-read=0 / vbv-maxrate=160000 / vbv-bufsize=160000 / vbv-init=0.9 / min-vbv-fullness=50.0 / max-vbv-fullness=80.0 / crf-max=0.0 / crf-min=0.0 / ipratio=1.40 / pbratio=1.30 / aq-mode=2 / aq-strength=1.00 / cutree / zone-count=0 / no-strict-cbr / qg-size=32 / no-rc-grain / qpmax=69 / qpmin=0 / no-const-vbv / sar=0 / overscan=0 / videoformat=5 / range=1 / colorprim=2 / transfer=2 / colormatrix=2 / chromaloc=1 / chromaloc-top=0 / chromaloc-bottom=0 / display-window=0 / cll=0,0 / min-luma=0 / max-luma=1023 / log2-max-poc-lsb=8 / vui-timing-info / vui-hrd-info / slices=1 / no-opt-qp-pps / no-opt-ref-list-length-pps / no-multi-pass-opt-rps / scenecut-bias=0.05 / hist-threshold=0.03 / no-opt-cu-delta-qp / no-aq-motion / no-hdr10 / no-hdr10-opt / no-dhdr10-opt / no-idr-recovery-sei / analysis-reuse-level=0 / analysis-save-reuse-level=0 / analysis-load-reuse-level=0 / scale-factor=0 / refine-intra=0 / refine-inter=0 / refine-mv=1 / refine-ctu-distortion=0 / no-limit-sao / ctu-info=0 / no-lowpass-dct / refine-analysis-type=0 / copy-pic=1 / max-ausize-factor=1.0 / no-dynamic-refine / no-single-sei / no-hevc-aq / no-svt / no-field / qp-adaptation-range=1.00 / no-scenecut-aware-qpconformance-window-offsets / right=0 / bottom=0 / decoder-max-rate=0 / no-vbv-live-multi-pass
Default                                  : No
Encoded date                             : UTC 2020-11-24 00:29:30
Tagged date                              : UTC 2020-11-24 00:29:30
Color range                              : Full
Codec configuration box                  : hvcC+dvcC

Video
ID                                       : 1
Format                                   : HEVC
Format/Info                              : High Efficiency Video Coding
Format profile                           : Main 10@L5.1@High
HDR format                               : Dolby Vision, Version 1.0, dvhe.08.06, BL+RPU / SMPTE ST 2086, HDR10 compatible
Codec ID                                 : dvhe
Codec ID/Info                            : High Efficiency Video Coding with Dolby Vision
Duration                                 : 1 min 0 s
Bit rate                                 : 6 795 kb/s
Width                                    : 3 840 pixels
Height                                   : 2 160 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 23.976 (24000/1001) FPS
Color space                              : YUV
Chroma subsampling                       : 4:2:0 (Type 2)
Bit depth                                : 10 bits
Bits/(Pixel*Frame)                       : 0.034
Stream size                              : 49.3 MiB (100%)
Writing library                          : x265 3.4+26-ga82c6c7a7:[Windows][GCC 10.2.1][64 bit] 10bit
Encoding settings                        : cpuid=1111039 / frame-threads=4 / numa-pools=28 / wpp / no-pmode / no-pme / no-psnr / no-ssim / log-level=2 / input-csp=1 / input-res=3840x2160 / interlace=0 / total-frames=1459 / level-idc=51 / high-tier=1 / uhd-bd=0 / ref=4 / no-allow-non-conformance / repeat-headers / annexb / aud / hrd / info / hash=0 / no-temporal-layers / no-open-gop / min-keyint=23 / keyint=250 / gop-lookahead=0 / bframes=4 / b-adapt=2 / b-pyramid / bframe-bias=0 / rc-lookahead=25 / lookahead-slices=4 / scenecut=40 / hist-scenecut=0 / radl=0 / no-splice / no-intra-refresh / ctu=64 / min-cu-size=8 / rect / no-amp / max-tu-size=32 / tu-inter-depth=1 / tu-intra-depth=1 / limit-tu=0 / rdoq-level=2 / dynamic-rd=0.00 / no-ssim-rd / signhide / no-tskip / nr-intra=0 / nr-inter=0 / no-constrained-intra / no-strong-intra-smoothing / max-merge=3 / limit-refs=3 / limit-modes / me=3 / subme=3 / merange=57 / temporal-mvp / no-frame-dup / no-hme / weightp / no-weightb / no-analyze-src-pics / deblock=-2:-2 / no-sao / no-sao-non-deblock / rd=4 / selective-sao=0 / no-early-skip / rskip / no-fast-intra / no-tskip-fast / no-cu-lossless / no-b-intra / no-splitrd-skip / rdpenalty=0 / psy-rd=2.00 / psy-rdoq=1.00 / no-rd-refine / no-lossless / cbqpoffs=0 / crqpoffs=0 / rc=crf / crf=14.0 / qcomp=0.60 / qpstep=4 / stats-write=0 / stats-read=0 / vbv-maxrate=160000 / vbv-bufsize=160000 / vbv-init=0.9 / min-vbv-fullness=50.0 / max-vbv-fullness=80.0 / crf-max=0.0 / crf-min=0.0 / ipratio=1.40 / pbratio=1.30 / aq-mode=2 / aq-strength=1.00 / cutree / zone-count=0 / no-strict-cbr / qg-size=32 / no-rc-grain / qpmax=69 / qpmin=0 / no-const-vbv / sar=0 / overscan=0 / videoformat=5 / range=0 / colorprim=9 / transfer=16 / colormatrix=9 / chromaloc=1 / chromaloc-top=2 / chromaloc-bottom=2 / display-window=0 / master-display=G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(10000000,1) / cll=233,63 / min-luma=0 / max-luma=1023 / log2-max-poc-lsb=8 / vui-timing-info / vui-hrd-info / slices=1 / no-opt-qp-pps / no-opt-ref-list-length-pps / no-multi-pass-opt-rps / scenecut-bias=0.05 / hist-threshold=0.03 / no-opt-cu-delta-qp / no-aq-motion / hdr10 / hdr10-opt / no-dhdr10-opt / no-idr-recovery-sei / analysis-reuse-level=0 / analysis-save-reuse-level=0 / analysis-load-reuse-level=0 / scale-factor=0 / refine-intra=0 / refine-inter=0 / refine-mv=1 / refine-ctu-distortion=0 / no-limit-sao / ctu-info=0 / no-lowpass-dct / refine-analysis-type=0 / copy-pic=1 / max-ausize-factor=1.0 / no-dynamic-refine / no-single-sei / no-hevc-aq / no-svt / no-field / qp-adaptation-range=1.00 / no-scenecut-aware-qpconformance-window-offsets / right=0 / bottom=0 / decoder-max-rate=0 / no-vbv-live-multi-pass
Default                                  : No
Encoded date                             : UTC 2020-11-24 01:57:43
Tagged date                              : UTC 2020-11-24 01:57:43
Color range                              : Limited
Color primaries                          : BT.2020
Transfer characteristics                 : PQ
Matrix coefficients                      : BT.2020 non-constant
Mastering display color primaries        : Display P3
Mastering display luminance              : min: 0.0001 cd/m2, max: 1000 cd/m2
Maximum Content Light Level              : 233 cd/m2
Maximum Frame-Average Light Level        : 63 cd/m2
Codec configuration box                  : hvcC+dvcC

[quietvoid]

I'm not sure BT2020 primaries is meant to be played as profile 5 :P
They both play just fine on my device, otherwise.
But yes, the profile 5 only plays in Dolby Vision.

[imhh11]

yes you're right, it's probably not possible yet to encode p7 bt2020 to true p5 which uses a different colorspace. or maybe you know how ?
profile 8 file with HDR10 BL should be standard though

thank's again for your great work.

[quietvoid]

There still seem to be unknowns in Dolby's IPTQc2 colorspace, if you're interested this mpv issue has good info: https://github.com/mpv-player/mpv/issues/7326

[SeeMoreDigital]

Originally Posted by quietvoid

I'm not sure BT2020 primaries is meant to be played as profile 5 :P
They both play just fine on my device, otherwise.
But yes, the profile 5 only plays in Dolby Vision.

Both files display the Dolby Vision logo on my 2016 LG television...

[ghostshadow]

Originally Posted by SeeMoreDigital

Both files display the Dolby Vision logo on my 2016 LG television...

Hello SeeMoreDigital, your encodings are in mp4, have you tried in mkv?

thank you again to quietvoid after the hdr10 + it finds the solution of the dolby vision

[imhh11]

Originally Posted by ghostshadow

Hello SeeMoreDigital, your encodings are in mp4, have you tried in mkv?

thank you again to quietvoid after the hdr10 + it finds the solution of the dolby vision

x265.exe produces raw HEVC stream. not an mp4 nor an mkv.

To create those samples, I encoded with x265.exe and then I used the mp4muxer to create a DV MP4. You could also use the nightly tsMuxer and make a TS file with Atmos and maybe you can try the yusesope tool (mkv patcher ?) but I have minimal experience with his tool.

[ghostshadow]

Originally Posted by imhh11

x265.exe produces raw HEVC stream. not an mp4 nor an mkv.

To create those samples, I encoded with x265.exe and then I used the mp4muxer to create a DV MP4. You could also use the nightly tsMuxer and make a TS file with Atmos and maybe you can try the yusesope tool (mkv patcher ?) but I have minimal experience with his tool.

no I encode in x265 and then with mkvtoolnix

[imhh11]

Originally Posted by ghostshadow

no I encode in x265 and then with mkvtoolnix

someone correct me if I'm wrong but mkvtoolnix has been updated to support dual-layer profile 7 Dolby Vision remixing(only the file created by makemkv) and does not support single layer DV remuxing.

[ghostshadow]

After you have to go back to Makemkv that's all

[SeeMoreDigital]

Originally Posted by ghostshadow

Hello SeeMoreDigital, your encodings are in mp4, have you tried in mkv?

Playing Dolby Vision HEVC encoded video streams placed within the .mkv container on an LG television is currently not possible because an entirely new .mkv file parser and splitter will have to be created first.

The same goes for any other SoC hardware playback device...

[imhh11]

Originally Posted by ghostshadow

After you have to go back to Makemkv that's all

I'm curious, how do you do that? I know it works with dual layers files but I never heard of MakeMkv working with single-layer file
I just tried and the DV metadata are gone once the new MKV is created.

[theweasley]

Originally Posted by quietvoid

Posting in this thread as it's the oldest.

I made a first release of my tool: https://github.com/quietvoid/dovi_to.../tag/0.1.0-fix
It can be used to create an RPU file from a profile 5, 7 or 8 HEVC encoded file.

Commands:
demux: Demuxes single track dual layer Dolby Vision into Base layer and Enhancement layer files.
extract-rpu: Extracts Dolby Vision RPU from an HEVC encoded file.

More info in the README.
Enjoy.

Thank you this is a Great tool! Works really well. I've managed to successfully create a profile 8.1 x265 uncropped encode with it.

I have a quick question on cropping.

I'd like to crop the encode as well. Looking at these specific lines in vdr_dm_data.rs (https://github.com/quietvoid/dovi_to...a.rs#L309-L310)

Am I right to assume that the active area for DV can be altered here by hard coding it into the RPU / EL to get a properly cropped encode with DV? Been experimenting with it a bit and I'm having trouble figuring out how the values can be altered. Can I simply hardcode a custom offset here and if so what would be the correct way to input them?

Once again, thank you very much for the script. Works amazingly. And your insight would be most appreciated!

[quietvoid]

From what I understand, they are only necessary to tell the decoder how large the black bars are.
If you crop them off, it would probably be 0.

[theweasley]

Originally Posted by quietvoid

From what I understand, they are only necessary to tell the decoder how large the black bars are.
If you crop them off, it would probably be 0.

Oh I see that makes more sense. Thanks! I'll test and report back.

One more quick thing: I've noticed that if I build your script from the source (without changing anything in the code), the dovi parsing runs super slow with a simple ffmpeg stream copy to EL.hevc, like at 0.5x even. But when I use your prebuilt tool that you release on github, it's 10 times faster. I am probably building it wrong. I use cargo build on the src directory. Should I be doing something else?

[quietvoid]

You need to build with optimizations, usually "cargo build --release".

[theweasley]

Originally Posted by quietvoid

You need to build with optimizations, usually "cargo build --release".

Amazing! Both your suggestions worked. Setting it to 0 allowed me to create a cropped encode that works without issues and the optimized build fixed the slow EL extraction. Without your tool this wouldn't be possible! Thanks again