StaxRip - Page 134

Magik Mark · 11th October 2017, 01:24

Stax

Windows 10 RS3 "Fall Update" is out. Do you see any incompatibilities?

Sxc · 11th October 2017, 04:08

Hi, if I use staxrip 1.7.0.0 stable to encode a mkv with AC3 audio that has a delay to a mkv with AAC audio, the audio is wildly out of sync and the resulting output file has the audio listed as being 1 second shorter (and a slightly smaller delay value).

Source from mediainfo before encoding:

Code:

Audio
ID                                       : 2
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Format settings, Endianness              : Big
Codec ID                                 : A_AC3
Duration                                 : 21 min 59 s
Bit rate mode                            : Constant
Bit rate                                 : 384 kb/s
Channel(s)                               : 6 channels
Channel positions                        : Front: L C R, Side: L R, LFE
Sampling rate                            : 48.0 kHz
Frame rate                               : 31.250 FPS (1536 SPF)
Bit depth                                : 16 bits
Compression mode                         : Lossy
Delay relative to video                  : -126 ms
Stream size                              : 60.4 MiB (7%)
Service kind                             : Complete Main
Default                                  : Yes
Forced                                   : No

From the output mkv file, note the duration is less by a second and the delay is adjusted:

Code:

Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : A_AAC-2
Duration                                 : 21 min 58 s
Bit rate                                 : 211 kb/s
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 kHz
Frame rate                               : 46.875 FPS (1024 SPF)
Compression mode                         : Lossy
Delay relative to video                  : -117 ms
Stream size                              : 33.2 MiB (4%)
Language                                 : English
Default                                  : No
Forced                                   : No

And using handbrake to encode the same file (and the sound is in sync) the mediainfo shows:

Code:

Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : A_AAC-2
Duration                                 : 21 min 59 s
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 kHz
Frame rate                               : 46.875 FPS (1024 SPF)
Compression mode                         : Lossy
Delay relative to video                  : -126 ms
Title                                    : Stereo
Default                                  : Yes
Forced                                   : No

I've tried using different encoders (qaac instead of the eac3to it uses for auto) and still the same result. Anyone else had this issue?

Magik Mark · 12th October 2017, 23:22

Stax

Just installed RS3 so far the the only problem that I encountered is "Shutdown" doesn't work after encoding

Zetti · 14th October 2017, 17:12

MKVToolNix v17.0.0 is released.

14th October 2017, 23:01

Could somebody please tell me how to include HSVadjust into Staxrip 1.6( I am a newcomer to scripting).
@ Stax:
I confirm the audio delay bug with 1.7.(see above: AC3 with delay > AAC to MKV or MP4 issue)
Encoding with 1.6 is OK.

stax76 · 15th October 2017, 00:33

@Lupissimo
@Sxc

Please post the full log file, I tried to reproduce it but couldn't find a problem.

@Zetti

Thanks, I've updated both.

Quote:

Just installed RS3 so far the the only problem that I encountered is "Shutdown" doesn't work after encoding

Is RS3 is officially released? I didn't notice news about it on my tech news site golem.de. staxrip uses shutdown.exe and I can't do much if it don't work.

@mparade

That don't contain the info I need, please upload a sample.

craigpro · 15th October 2017, 02:08

hi stax76 - unfortunately I have this recurring error with stable 1.7.0.0 with any file I try to encode (I upgraded NVencc 3.2.2 to 3.2.3):

Error Video encoding using NVEnc 3.22 (1.7.0.0)

Video encoding using NVEnc 3.22 failed with exit code: 1 (0x1)

The exit code might be a system error code: STATUS_WAIT_1

The exit code might be a system error code: Incorrect function.

------------------- Video encoding using NVEnc 3.22 -------------------

C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265

NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2)
OS Version Windows 7 x64 (7601)
CPU Intel Core i5-2500K @ 3.30GHz (4C/4T)
GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92)
NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto
Input Buffers CUDA, 36 frames
Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps
Vpp Filters copyHtoD
Output Info H.265/HEVC main10 @ Level auto
1280x720p 1:1 23.976fps (24000/1001fps)
Encoder Preset quality
Rate Control CQP I:18 P:20 B:22
Lookahead on, 16 frames, Adaptive I, B Insert
GOP length 240 frames
B frames 0 frames
Ref frames 3 frames, LTR: off
AQ off
CU max / min auto / auto
Others mv:auto
Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure).

StaxRip.ErrorAbortException: Video encoding using NVEnc 3.22 failed with exit code: 1 (0x1)

The exit code might be a system error code: STATUS_WAIT_1

The exit code might be a system error code: Incorrect function.

------------------- Video encoding using NVEnc 3.22 -------------------

C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265

NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2)
OS Version Windows 7 x64 (7601)
CPU Intel Core i5-2500K @ 3.30GHz (4C/4T)
GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92)
NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto
Input Buffers CUDA, 36 frames
Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps
Vpp Filters copyHtoD
Output Info H.265/HEVC main10 @ Level auto
1280x720p 1:1 23.976fps (24000/1001fps)
Encoder Preset quality
Rate Control CQP I:18 P:20 B:22
Lookahead on, 16 frames, Adaptive I, B Insert
GOP length 240 frames
B frames 0 frames
Ref frames 3 frames, LTR: off
AQ off
CU max / min auto / auto
Others mv:auto
Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure).

at StaxRip.Proc.Start() in D:\Projekte\VS\VB\StaxRip\General\Proc.vb:line 338
at StaxRip.NVEnc.Encode() in D:\Projekte\VS\VB\StaxRip\Encoding\NVEnc.vb:line 82
at StaxRip.GlobalClass.ProcessVideo() in D:\Projekte\VS\VB\StaxRip\General\GlobalClass.vb:line 225
at System.Threading.Tasks.Parallel.<>c__DisplayClass4_0.<Invoke>b__0()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at StaxRip.GlobalClass.ProcessJob(String jobPath) in D:\Projekte\VS\VB\StaxRip\General\GlobalClass.vb:line 137

the complete log file :

-------------------------- System Environment --------------------------

StaxRip : 1.7.0.0
Windows : Windows 7 Home Premium
Language : English (Australia)
CPU : Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
GPU : NVIDIA GeForce GTX 1060 6GB
Resolution : 1920 x 1080
DPI : 96

------------------------ MediaInfo Source File ------------------------

H:\NEW\testfile.mkv

General
Complete name : H:\NEW\testfile.mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 2.18 GiB
Duration : 56 min 53 s
Overall bit rate mode : Variable
Overall bit rate : 5 479 kb/s
Encoded date : UTC 2017-08-21 21:21:11
Writing application : mkvmerge v8.3.0 ('Over the Horizon') 64bit
Writing library : libebml v1.3.1 + libmatroska v1.4.2

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4.1
Format settings : CABAC / 5 Ref Frames
Format, CABAC : Yes
Format, RefFrames : 5 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 56 min 53 s
Bit rate : 4 773 kb/s
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.216
Stream size : 1.89 GiB (87%)
Writing library : x264 core 152 r2851 ba24899
Language : English
Default : Yes
Forced : No

Audio
ID : 2
Format : FLAC
Format/Info : Free Lossless Audio Codec
Codec ID : A_FLAC
Duration : 56 min 53 s
Bit rate mode : Variable
Bit rate : 720 kb/s
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 48.0 kHz
Frame rate : 11.719 FPS (4096 SPF)
Bit depth : 24 bits
Stream size : 293 MiB (13%)
Writing library : libFLAC 1.2.1 (UTC 2007-09-17)
Language : English
Default : Yes
Forced : No

Menu
00 : 00:00.000 : en:00:00:00.000
00 : 07:07.552 : en:00:07:07.552
00 : 11:30.023 : en:00:11:30.023
00 : 23:31.076 : en:00:23:31.076
00 : 29:10.207 : en:00:29:10.207
00 : 36:12.712 : en:00:36:12.712
00 : 45:33.314 : en:00:45:33.314

------------------ Demux MKV using mkvextract 15.0.0 ------------------

C:\GPU\StaxRip-x64-1.7\Apps\MKVToolNix\mkvextract.exe tracks H:\NEW\testfile.mkv 1:"H:\NEW\testfile_temp\testfile ID1 English.flac" --ui-language en

Extracting track 1 with the CodecID 'A_FLAC' to the file 'H:\NEW\testfile_temp\testfile ID1 English.flac'. Container format: raw data

Start: 11:58:46 AM
End: 11:58:58 AM
Duration: 00:00:12

General
Complete name : H:\NEW\testfile_temp\testfile ID1 English.flac
Format : FLAC
Format/Info : Free Lossless Audio Codec
File size : 293 MiB
Duration : 56 min 53 s
Overall bit rate mode : Variable
Overall bit rate : 720 kb/s

Audio
Format : FLAC
Format/Info : Free Lossless Audio Codec
Duration : 56 min 53 s
Bit rate mode : Variable
Bit rate : 720 kb/s
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 48.0 kHz
Bit depth : 24 bits
Stream size : 293 MiB (100%)
Writing library : libFLAC 1.2.1 (UTC 2007-09-17)

-------------- Demux xml chapters using mkvextract 15.0.0 --------------

C:\GPU\StaxRip-x64-1.7\Apps\MKVToolNix\mkvextract.exe chapters H:\NEW\testfile.mkv --redirect-output H:\NEW\testfile_temp\testfile_chapters.xml

File 'H:\NEW\testfile.mkv': container: Matroska
Track ID 0: video (MPEG-4p10/AVC/h.264)
Track ID 1: audio (FLAC)
Chapters: 7 entries

Start: 11:58:58 AM
End: 11:58:59 AM
Duration: 00:00:00

-------------- Demux ogg chapters using mkvextract 15.0.0 --------------

C:\GPU\StaxRip-x64-1.7\Apps\MKVToolNix\mkvextract.exe chapters H:\NEW\testfile.mkv --redirect-output H:\NEW\testfile_temp\testfile_chapters.txt --simple

File 'H:\NEW\testfile.mkv': container: Matroska
Track ID 0: video (MPEG-4p10/AVC/h.264)
Track ID 1: audio (FLAC)
Chapters: 7 entries

Start: 11:58:59 AM
End: 11:58:59 AM
Duration: 00:00:00

----------------------- Indexing using ffmsindex -----------------------

C:\GPU\StaxRip-x64-1.7\Apps\Plugins\both\ffms2\ffmsindex.exe H:\NEW\testfile.mkv H:\NEW\testfile_temp\testfile.ffindex

Writing index... done.

Start: 11:58:59 AM
End: 11:59:03 AM
Duration: 00:00:04

--------------------------- AviSynth Script ---------------------------

LoadPlugin("C:\GPU\StaxRip-x64-1.7\Apps\Plugins\both\ffms2\ffms2.dll")
FFVideoSource("H:\NEW\testfile.mkv", colorspace = "YV12", \
cachefile = "H:\NEW\testfile_temp\testfile.ffindex")

-------------------------- Script Properties --------------------------

Source Frame Count : 81838
Source Frame Rate : 23.976024
Source Duration : 00:56:53.3270000
Target Frame Count : 81838
Target Frame Rate : 23.976024
Target Duration : 00:56:53.3270000

----------------------- MediaInfo Audio Source 1 -----------------------

General
Complete name : H:\NEW\testfile_temp\testfile ID1 English.flac
Format : FLAC
Format/Info : Free Lossless Audio Codec
File size : 293 MiB
Duration : 56 min 53 s
Overall bit rate mode : Variable
Overall bit rate : 720 kb/s

Audio
Format : FLAC
Format/Info : Free Lossless Audio Codec
Duration : 56 min 53 s
Bit rate mode : Variable
Bit rate : 720 kb/s
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 48.0 kHz
Bit depth : 24 bits
Stream size : 293 MiB (100%)
Writing library : libFLAC 1.2.1 (UTC 2007-09-17)

---------------- Error Video encoding using NVEnc 3.22 ----------------

Video encoding using NVEnc 3.22 failed with exit code: 1 (0x1)

The exit code might be a system error code: STATUS_WAIT_1

The exit code might be a system error code: Incorrect function.

------------------- Video encoding using NVEnc 3.22 -------------------

C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265

NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2)
OS Version Windows 7 x64 (7601)
CPU Intel Core i5-2500K @ 3.30GHz (4C/4T)
GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92)
NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto
Input Buffers CUDA, 36 frames
Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps
Vpp Filters copyHtoD
Output Info H.265/HEVC main10 @ Level auto
1280x720p 1:1 23.976fps (24000/1001fps)
Encoder Preset quality
Rate Control CQP I:18 P:20 B:22
Lookahead on, 16 frames, Adaptive I, B Insert
GOP length 240 frames
B frames 0 frames
Ref frames 3 frames, LTR: off
AQ off
CU max / min auto / auto
Others mv:auto
Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure).

------------------- Video encoding using NVEnc 3.22 -------------------

C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265

NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2)
OS Version Windows 7 x64 (7601)
CPU Intel Core i5-2500K @ 3.30GHz (4C/4T)
GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92)
NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto
Input Buffers CUDA, 36 frames
Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps
Vpp Filters copyHtoD
Output Info H.265/HEVC main10 @ Level auto
1280x720p 1:1 23.976fps (24000/1001fps)
Encoder Preset quality
Rate Control CQP I:18 P:20 B:22
Lookahead on, 16 frames, Adaptive I, B Insert
GOP length 240 frames
B frames 0 frames
Ref frames 3 frames, LTR: off
AQ off
CU max / min auto / auto
Others mv:auto
Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure).

Start: 11:59:30 AM
End: 12:01:01 PM
Duration: 00:01:30

hope this helps, any further information I can give please let me know.

Please note that the issue does ALSO occur with stable 1.6.0.0 - so it might be video driver related - I updated my Nvidia GPU drivers to v387.92 two days ago.

Thank you.

stax76 · 15th October 2017, 02:11

Yes I think it's related to the new driver.

https://github.com/rigaya/NVEnc/issues/15

craigpro · 15th October 2017, 02:25

Quote:

Originally Posted by stax76

Yes I think it's related to the new driver.

https://github.com/rigaya/NVEnc/issues/15

mate, you are a legend. thank you. I had a look at that other bloke's error report and I'll try it without the weightp option (if possible) as a workaround.. otherwise guess I need to wait until the issue is identified as a driver issue or not.

thank you.

EDIT: tried a quick test by disabling the weightp option and it works but video size is hardly compressed at all.

suprasaiyan123 · 15th October 2017, 05:07

what's the correct way to encode x265 2160p HDR video?? I tried a test vid however after encoding(x265) the HDR metadata was no longer picked up and the encode was washed out, thought the metadata would automatically pass through to the encode??? using staxrip 1.7.0.0

LazyNcoder · 15th October 2017, 07:52

I also need a proper way to convert HDR to SDR. I think we need a guide for HDR -> HDR, HDR -> SDR, SDR -> HDR.
I think they talked about it before on the forum but it's needed to be gathered from many posts here as we don't have any complete guide about this.

Zetti · 15th October 2017, 13:20

FFmpeg v3.3.4 is released.
and
MP4Box v0.7.2-DEV-rev292 is released.

Natty · 15th October 2017, 23:56

https://mkvtoolnix.download/doc/NEWS.md

mkvtoolnix 17.0.0

mparade · 17th October 2017, 07:42

I have done one test encode using NVEnc and my Quadro K4200.
I have set output bitdepth to 10bit. The output became only 8bit. Does NVEnc support 10bit h264 encoding with any other Nvidia card at all (my card is from the 1st (Kepler) generation)? I haven't found anything about it in the NVEnc docs.

On top of it, all I have found some artifacts in the output as well

Please help.

Yanak · 17th October 2017, 09:19

Stax released a new test version yesterday 1.7.0.4 : https://github.com/stax76/staxrip/bl...r/changelog.md

There is a new option for the HDR metadata and one thing related to nvenc --transfer flags , not using those myself but maybe previous posts related to HDR or nvenc issues can give it a try and find this one more helpful.

mparade · 20th October 2017, 07:19

@stax76

Quote:

That don't contain the info I need, please upload a sample.

No problem. Just have to find out how to cut properly a BD 3D structure. If there is is no SSIF folder it is not a problem because only an m2ts container needs to be cut. But if storing is done using the other method when AVC and MVC part is stored in separate containers, I still do not know.

Quote:

If you have a HDR source and have x265 enabled prior opening the source file, the latest build will read HDR info from the source and set the according x265 options, you can use the built in MediaInfo viewer to verify if your source contains HDR info.

If you have a regular HD source you can use:

Main Menu > Tools > Scripts > Convert Bluray (BT709) to 10bit 400nits (MaxFALL) HDR

What about when using NVEncC? I have an Nvidia GTX 1080Ti and try to make some tests using the CQP method on HDR 4K and "Convert Bluray (BT709) to 10bit 400nits (MaxFALL) HDR" converted sources.
But in this case we need to feed the encoder (NVEncC) with the correct HDR metadata as well. Is it currently possible? The player is going to use such metadata when the source is HDR10:

- "SMPTE 2086 mastering display information (gamut, min + max luminance), MaxCLL and MaxFALL. Stuff like the video's color primaries, matrix, transfer etc are usually "assumed" and not transported;"

So, if they lack of such metadata, I do not really know if they will be handled properly at all by the display/player.

Thank you very much for the info.

Blackshadow · 21st October 2017, 07:22

Quote:

Originally Posted by mparade

@stax76

No problem. Just have to find out how to cut properly a BD 3D structure. If there is is no SSIF folder it is not a problem because only an m2ts container needs to be cut. But if storing is done using the other method when AVC and MVC part is stored in separate containers, I still do not know.

What about when using NVEncC? I have an Nvidia GTX 1080Ti and try to make some tests using the CQP method on HDR 4K and "Convert Bluray (BT709) to 10bit 400nits (MaxFALL) HDR" converted sources.
But in this case we need to feed the encoder (NVEncC) with the correct HDR metadata as well. Is it currently possible? The player is going to use such metadata when the source is HDR10:

- "SMPTE 2086 mastering display information (gamut, min + max luminance), MaxCLL and MaxFALL. Stuff like the video's color primaries, matrix, transfer etc are usually "assumed" and not transported;"

So, if they lack of such metadata, I do not really know if they will be handled properly at all by the display/player.

Thank you very much for the info.

You can cut 3d blue ray using dvdfab latest version
It allow mvc mkv passthrough simultaneously trim the movie output is same like make mkv or you can generate small 3d blue ray from SBS clip for testing using Sony Vegas

mparade · 21st October 2017, 10:33

Quote:

Originally Posted by stax76

@mparade

That don't contain the info I need, please upload a sample.

Sample1 (the original m2ts container was cut including both AVC and MVC streams, in-mux "storage") is uploaded here:

http://s1.toldacuccot.hu/letoltes?si...t1_inmux3D.zip

Please let me know if it contains the info you need.

Thank you very much for your amazing software.

mparade · 21st October 2017, 11:29

Quote:

Originally Posted by stax76

@mparade

That don't contain the info I need, please upload a sample.

2nd sample is uploaded here as an ISO file (SSIF structure):

http://s1.toldacuccot.hu/letoltes?si...t2_SSIF_3D.zip

mparade · 21st October 2017, 11:32

Quote:

Originally Posted by Blackshadow

You can cut 3d blue ray using dvdfab latest version
It allow mvc mkv passthrough simultaneously trim the movie output is same like make mkv or you can generate small 3d blue ray from SBS clip for testing using Sony Vegas

Finally, I have found out that tsMuxer GUI can solve these problems, but first of all, we should wait for stax76 to know if he can use the uploaded sources.

11th October 2017, 01:24	#2661 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Stax Windows 10 RS3 "Fall Update" is out. Do you see any incompatibilities? __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

12th October 2017, 23:22	#2663 \| Link
Magik Mark Registered User Join Date: Dec 2014 Posts: 666	Stax Just installed RS3 so far the the only problem that I encountered is "Shutdown" doesn't work after encoding __________________ Asus ProArt Z790 - 13th Gen Intel i9 - RTX 3080 - DDR5 64GB Predator - LG OLED C9 - Yamaha A3030 - Windows 11 x64 - PotPlayerr - Lav - MadVR

15th October 2017, 02:11	#2668 \| Link
stax76 Registered User Join Date: Jun 2002 Location: On thin ice Posts: 6,837	Yes I think it's related to the new driver. https://github.com/rigaya/NVEnc/issues/15 __________________ https://github.com/stax76/software-list https://www.youtube.com/@stax76/playlists

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

14th October 2017, 17:12	#2664 \| Link
Zetti Registered User Join Date: Dec 2015 Posts: 309	MKVToolNix v17.0.0 is released.

14th October 2017, 23:01	#2665 \| Link
Lupissimo Guest Posts: n/a	Could somebody please tell me how to include HSVadjust into Staxrip 1.6( I am a newcomer to scripting). @ Stax: I confirm the audio delay bug with 1.7.(see above: AC3 with delay > AAC to MKV or MP4 issue) Encoding with 1.6 is OK.

15th October 2017, 02:08	#2667 \| Link
craigpro Registered User Join Date: Feb 2003 Posts: 68	hi stax76 - unfortunately I have this recurring error with stable 1.7.0.0 with any file I try to encode (I upgraded NVencc 3.2.2 to 3.2.3): Error Video encoding using NVEnc 3.22 (1.7.0.0) Video encoding using NVEnc 3.22 failed with exit code: 1 (0x1) The exit code might be a system error code: STATUS_WAIT_1 The exit code might be a system error code: Incorrect function. ------------------- Video encoding using NVEnc 3.22 ------------------- C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265 NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2) OS Version Windows 7 x64 (7601) CPU Intel Core i5-2500K @ 3.30GHz (4C/4T) GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92) NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto Input Buffers CUDA, 36 frames Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps Vpp Filters copyHtoD Output Info H.265/HEVC main10 @ Level auto 1280x720p 1:1 23.976fps (24000/1001fps) Encoder Preset quality Rate Control CQP I:18 P:20 B:22 Lookahead on, 16 frames, Adaptive I, B Insert GOP length 240 frames B frames 0 frames Ref frames 3 frames, LTR: off AQ off CU max / min auto / auto Others mv:auto Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure). StaxRip.ErrorAbortException: Video encoding using NVEnc 3.22 failed with exit code: 1 (0x1) The exit code might be a system error code: STATUS_WAIT_1 The exit code might be a system error code: Incorrect function. ------------------- Video encoding using NVEnc 3.22 ------------------- C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265 NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2) OS Version Windows 7 x64 (7601) CPU Intel Core i5-2500K @ 3.30GHz (4C/4T) GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92) NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto Input Buffers CUDA, 36 frames Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps Vpp Filters copyHtoD Output Info H.265/HEVC main10 @ Level auto 1280x720p 1:1 23.976fps (24000/1001fps) Encoder Preset quality Rate Control CQP I:18 P:20 B:22 Lookahead on, 16 frames, Adaptive I, B Insert GOP length 240 frames B frames 0 frames Ref frames 3 frames, LTR: off AQ off CU max / min auto / auto Others mv:auto Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure). at StaxRip.Proc.Start() in D:\Projekte\VS\VB\StaxRip\General\Proc.vb:line 338 at StaxRip.NVEnc.Encode() in D:\Projekte\VS\VB\StaxRip\Encoding\NVEnc.vb:line 82 at StaxRip.GlobalClass.ProcessVideo() in D:\Projekte\VS\VB\StaxRip\General\GlobalClass.vb:line 225 at System.Threading.Tasks.Parallel.<>c__DisplayClass4_0.<Invoke>b__0() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at StaxRip.GlobalClass.ProcessJob(String jobPath) in D:\Projekte\VS\VB\StaxRip\General\GlobalClass.vb:line 137 the complete log file : -------------------------- System Environment -------------------------- StaxRip : 1.7.0.0 Windows : Windows 7 Home Premium Language : English (Australia) CPU : Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz GPU : NVIDIA GeForce GTX 1060 6GB Resolution : 1920 x 1080 DPI : 96 ------------------------ MediaInfo Source File ------------------------ H:\NEW\testfile.mkv General Complete name : H:\NEW\testfile.mkv Format : Matroska Format version : Version 4 / Version 2 File size : 2.18 GiB Duration : 56 min 53 s Overall bit rate mode : Variable Overall bit rate : 5 479 kb/s Encoded date : UTC 2017-08-21 21:21:11 Writing application : mkvmerge v8.3.0 ('Over the Horizon') 64bit Writing library : libebml v1.3.1 + libmatroska v1.4.2 Video ID : 1 Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4.1 Format settings : CABAC / 5 Ref Frames Format, CABAC : Yes Format, RefFrames : 5 frames Codec ID : V_MPEG4/ISO/AVC Duration : 56 min 53 s Bit rate : 4 773 kb/s Width : 1 280 pixels Height : 720 pixels Display aspect ratio : 16:9 Frame rate mode : Constant Frame rate : 23.976 (24000/1001) FPS Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.216 Stream size : 1.89 GiB (87%) Writing library : x264 core 152 r2851 ba24899 Language : English Default : Yes Forced : No Audio ID : 2 Format : FLAC Format/Info : Free Lossless Audio Codec Codec ID : A_FLAC Duration : 56 min 53 s Bit rate mode : Variable Bit rate : 720 kb/s Channel(s) : 1 channel Channel positions : Front: C Sampling rate : 48.0 kHz Frame rate : 11.719 FPS (4096 SPF) Bit depth : 24 bits Stream size : 293 MiB (13%) Writing library : libFLAC 1.2.1 (UTC 2007-09-17) Language : English Default : Yes Forced : No Menu 00 : 00:00.000 : en:00:00:00.000 00 : 07:07.552 : en:00:07:07.552 00 : 11:30.023 : en:00:11:30.023 00 : 23:31.076 : en:00:23:31.076 00 : 29:10.207 : en:00:29:10.207 00 : 36:12.712 : en:00:36:12.712 00 : 45:33.314 : en:00:45:33.314 ------------------ Demux MKV using mkvextract 15.0.0 ------------------ C:\GPU\StaxRip-x64-1.7\Apps\MKVToolNix\mkvextract.exe tracks H:\NEW\testfile.mkv 1:"H:\NEW\testfile_temp\testfile ID1 English.flac" --ui-language en Extracting track 1 with the CodecID 'A_FLAC' to the file 'H:\NEW\testfile_temp\testfile ID1 English.flac'. Container format: raw data Start: 11:58:46 AM End: 11:58:58 AM Duration: 00:00:12 General Complete name : H:\NEW\testfile_temp\testfile ID1 English.flac Format : FLAC Format/Info : Free Lossless Audio Codec File size : 293 MiB Duration : 56 min 53 s Overall bit rate mode : Variable Overall bit rate : 720 kb/s Audio Format : FLAC Format/Info : Free Lossless Audio Codec Duration : 56 min 53 s Bit rate mode : Variable Bit rate : 720 kb/s Channel(s) : 1 channel Channel positions : Front: C Sampling rate : 48.0 kHz Bit depth : 24 bits Stream size : 293 MiB (100%) Writing library : libFLAC 1.2.1 (UTC 2007-09-17) -------------- Demux xml chapters using mkvextract 15.0.0 -------------- C:\GPU\StaxRip-x64-1.7\Apps\MKVToolNix\mkvextract.exe chapters H:\NEW\testfile.mkv --redirect-output H:\NEW\testfile_temp\testfile_chapters.xml File 'H:\NEW\testfile.mkv': container: Matroska Track ID 0: video (MPEG-4p10/AVC/h.264) Track ID 1: audio (FLAC) Chapters: 7 entries Start: 11:58:58 AM End: 11:58:59 AM Duration: 00:00:00 -------------- Demux ogg chapters using mkvextract 15.0.0 -------------- C:\GPU\StaxRip-x64-1.7\Apps\MKVToolNix\mkvextract.exe chapters H:\NEW\testfile.mkv --redirect-output H:\NEW\testfile_temp\testfile_chapters.txt --simple File 'H:\NEW\testfile.mkv': container: Matroska Track ID 0: video (MPEG-4p10/AVC/h.264) Track ID 1: audio (FLAC) Chapters: 7 entries Start: 11:58:59 AM End: 11:58:59 AM Duration: 00:00:00 ----------------------- Indexing using ffmsindex ----------------------- C:\GPU\StaxRip-x64-1.7\Apps\Plugins\both\ffms2\ffmsindex.exe H:\NEW\testfile.mkv H:\NEW\testfile_temp\testfile.ffindex Writing index... done. Start: 11:58:59 AM End: 11:59:03 AM Duration: 00:00:04 --------------------------- AviSynth Script --------------------------- LoadPlugin("C:\GPU\StaxRip-x64-1.7\Apps\Plugins\both\ffms2\ffms2.dll") FFVideoSource("H:\NEW\testfile.mkv", colorspace = "YV12", \ cachefile = "H:\NEW\testfile_temp\testfile.ffindex") -------------------------- Script Properties -------------------------- Source Frame Count : 81838 Source Frame Rate : 23.976024 Source Duration : 00:56:53.3270000 Target Frame Count : 81838 Target Frame Rate : 23.976024 Target Duration : 00:56:53.3270000 ----------------------- MediaInfo Audio Source 1 ----------------------- General Complete name : H:\NEW\testfile_temp\testfile ID1 English.flac Format : FLAC Format/Info : Free Lossless Audio Codec File size : 293 MiB Duration : 56 min 53 s Overall bit rate mode : Variable Overall bit rate : 720 kb/s Audio Format : FLAC Format/Info : Free Lossless Audio Codec Duration : 56 min 53 s Bit rate mode : Variable Bit rate : 720 kb/s Channel(s) : 1 channel Channel positions : Front: C Sampling rate : 48.0 kHz Bit depth : 24 bits Stream size : 293 MiB (100%) Writing library : libFLAC 1.2.1 (UTC 2007-09-17) ---------------- Error Video encoding using NVEnc 3.22 ---------------- Video encoding using NVEnc 3.22 failed with exit code: 1 (0x1) The exit code might be a system error code: STATUS_WAIT_1 The exit code might be a system error code: Incorrect function. ------------------- Video encoding using NVEnc 3.22 ------------------- C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265 NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2) OS Version Windows 7 x64 (7601) CPU Intel Core i5-2500K @ 3.30GHz (4C/4T) GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92) NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto Input Buffers CUDA, 36 frames Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps Vpp Filters copyHtoD Output Info H.265/HEVC main10 @ Level auto 1280x720p 1:1 23.976fps (24000/1001fps) Encoder Preset quality Rate Control CQP I:18 P:20 B:22 Lookahead on, 16 frames, Adaptive I, B Insert GOP length 240 frames B frames 0 frames Ref frames 3 frames, LTR: off AQ off CU max / min auto / auto Others mv:auto Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure). ------------------- Video encoding using NVEnc 3.22 ------------------- C:\GPU\StaxRip-x64-1.7\Apps\NVEnc\NVEncC64.exe --cqp 18:20:22 --codec h265 --preset quality --output-depth 10 --weightp --lookahead 16 --transfer auto -i H:\NEW\testfile_temp\testfile.avs -o H:\NEW\testfile_temp\testfile_out.h265 NVEncC (x64) 3.23 (r667) by rigaya, Sep 26 2017 20:51:36 (VC 1900/Win/avx2) OS Version Windows 7 x64 (7601) CPU Intel Core i5-2500K @ 3.30GHz (4C/4T) GPU #0: GeForce GTX 1060 6GB (10 EU) @ 1708 MHz (387.92) NVENC / CUDA NVENC API 8.0, CUDA 9.1, schedule mode: auto Input Buffers CUDA, 36 frames Input Info Avisynth 2.60(yv12)->p010 [AVX], 1280x720, 24000/1001 fps Vpp Filters copyHtoD Output Info H.265/HEVC main10 @ Level auto 1280x720p 1:1 23.976fps (24000/1001fps) Encoder Preset quality Rate Control CQP I:18 P:20 B:22 Lookahead on, 16 frames, Adaptive I, B Insert GOP length 240 frames B frames 0 frames Ref frames 3 frames, LTR: off AQ off CU max / min auto / auto Others mv:auto Error cudaEventSynchronize: 4 (cudaErrorLaunchFailure). Start: 11:59:30 AM End: 12:01:01 PM Duration: 00:01:30 hope this helps, any further information I can give please let me know. Please note that the issue does ALSO occur with stable 1.6.0.0 - so it might be video driver related - I updated my Nvidia GPU drivers to v387.92 two days ago. Thank you.

15th October 2017, 05:07	#2670 \| Link
suprasaiyan123 Registered User Join Date: Sep 2017 Posts: 14	what's the correct way to encode x265 2160p HDR video?? I tried a test vid however after encoding(x265) the HDR metadata was no longer picked up and the encode was washed out, thought the metadata would automatically pass through to the encode??? using staxrip 1.7.0.0

15th October 2017, 07:52	#2671 \| Link
LazyNcoder Registered User Join Date: Feb 2015 Posts: 33	I also need a proper way to convert HDR to SDR. I think we need a guide for HDR -> HDR, HDR -> SDR, SDR -> HDR. I think they talked about it before on the forum but it's needed to be gathered from many posts here as we don't have any complete guide about this.

15th October 2017, 13:20	#2672 \| Link
Zetti Registered User Join Date: Dec 2015 Posts: 309	FFmpeg v3.3.4 is released. and MP4Box v0.7.2-DEV-rev292 is released.

15th October 2017, 23:56	#2673 \| Link
Natty Noob Join Date: Mar 2017 Posts: 221	https://mkvtoolnix.download/doc/NEWS.md mkvtoolnix 17.0.0

17th October 2017, 07:42	#2674 \| Link
mparade Registered User Join Date: Nov 2013 Posts: 577	I have done one test encode using NVEnc and my Quadro K4200. I have set output bitdepth to 10bit. The output became only 8bit. Does NVEnc support 10bit h264 encoding with any other Nvidia card at all (my card is from the 1st (Kepler) generation)? I haven't found anything about it in the NVEnc docs. On top of it, all I have found some artifacts in the output as well Please help.

17th October 2017, 09:19	#2675 \| Link
Yanak Registered User Join Date: Oct 2011 Posts: 275	Stax released a new test version yesterday 1.7.0.4 : https://github.com/stax76/staxrip/bl...r/changelog.md There is a new option for the HDR metadata and one thing related to nvenc --transfer flags , not using those myself but maybe previous posts related to HDR or nvenc issues can give it a try and find this one more helpful.