tsMuxer Open Source

[staina]

@justdan96 Yes one saying UI issue - Red area width and overlap text.

Two saying - Still would it would in the same parts behind command Play PL_MK 0, GPR10 (HEX: 42 82 00 00 00 00 00 00 00 00 00 0A) change command Jump Title 1 (HEX: 21 81 00 00 00 00 00 01 00 00 00 00) to command Break (HEX: 00 02 00 00 00 00 00 00 00 00 00 00). Command Jump Title 1 playback bluray disk over and over in loop order ending playback at the end movie.

[imhh11]

Hi, is it possible to add an option for batch jobs ( queue) ?

[zeropc]

Doesn't anyone know how to get the app properly working on macOS?

[filler56789]

Originally Posted by zeropc

Doesn't anyone know how to get the app properly working on macOS?

According to the official README.md:

This ZIP file for MacOS can just be unzipped and the executables can be used after installing a couple of dependencies.
To install those run the commands below in the Terminal:

ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" < /dev/null 2> /dev/null
brew install freetype
brew install zlib

which in my not-so-humble opinion is not good enough.
I mean, why no static builds for the Mac operating system?

I have already asked this question but it went ignored

--- by justdan96 and by the "contributors" as well.

[zeropc]

Originally Posted by filler56789

snip...

Thanks. This worked

[filler56789]

Originally Posted by zeropc

Thanks. This worked

Great
Now all we have to do is give an to justdan96.

[justdan96]

I haven't tried a static build on Mac, I can look into it at some point. Alternatively we could put the dynamic libraries into the app package. Xavery is working on a native build for Mac so he might be better placed to comment.

[Hombre007]

I’am using ts MuxeR 2.6.15 fore remuxing UHD discs.

I take the v.i. a Complete UHD version and select video and English audio streams and ad the Dutch subtitles. But sometimes I encounter 2 problems.

1. tsMuxer chances the frame rate from 24 too 23,976 by the video stream ab subtitles, bet not de audio. Result the audio is out of sync and the picture stutters.
2. The HDR is not done correctly in the remux. Result the UHD player says that the video stream is SDR or gives a minimum 0.000 and maximum 0.000 Nits instead of o.005 -1.000/4.000 Nits as the source file.

So is this a bug ore do I something wrong?

[a5180007]

Originally Posted by Hombre007

1. tsMuxer chances the frame rate from 24 too 23,976 by the video stream ab subtitles, bet not de audio. Result the audio is out of sync and the picture stutters.

To change the audio framerate, the audio needs to be re-encoded first (eg via ffmpeg).

Originally Posted by Hombre007

2. The HDR is not done correctly in the remux. Result the UHD player says that the video stream is SDR or gives a minimum 0.000 and maximum 0.000 Nits instead of o.005 -1.000/4.000 Nits as the source file.

Please provide link for a 20MB sample of the original m2ts -cut with a hex editor.

[Hombre007]

Originally Posted by a5180007

To change the audio framerate, the audio needs to be re-encoded first (eg via ffmpeg).

Please provide link for a 20MB sample of the original m2ts -cut with a hex editor.

Thanks fore responding.

Fore problem no 1. someone gave me a tip.
“Try forcing the video stream to stay in 24p with the change fps option”..
Must try if this works.

I did a Blue-ray folder remux with the full UHD of Pan (2015), Rambo 3 and T2 and they played without HDR on the Oppo-203 UHD player. Even forcing HDR in the player did not work.
But how do a make a 20mb source file?

[Pauly Dunne]

Originally Posted by Hart2hart

I posted a way to do this a few years ago. Instead of joining playlists join ssif files. The results are seamless. Only thing I had to do was to fix chapter marks on second half. I’ll see if I can locate it and post link here.


It’s post 9 in this thread


https://forum.redfox.bz/threads/3d-b...e-disks.70932/

Hi Hart2hart,

I just thought I'd get back to you to let you know that I still had NO luck getting this to join together successfully...HOWEVER, I acquired a different "version" of Titanic 3D, that was 2 iso's of approx 45Gb each. I joined the 2 SSIF files, and it worked perfectly, thank goodness.

No short black frames between parts.

There was/is obviously something wrong with the versions that most people have tried to join, with not much success.

[hubblec4]

Feature request
Is it possible in demux-mode to extract a sup-stream and the forced captions of this sup-stream simultaneously?

[a5180007]

Originally Posted by Hombre007

But how do a make a 20mb source file?

Use a Hex editor e.g. HxD, or use simple tools such as Trunc.

Which version of tsMuxer are you using ?

[a5180007]

Originally Posted by hubblec4

Feature request
Is it possible in demux-mode to extract a sup-stream and the forced captions of this sup-stream simultaneously?

@hubblec4 this is rather the job of a subtitle software.

From the sup in BDSup2Sub, File => Save/Export, check the box to export forced subtitles only.

[a5180007]

Originally Posted by mattmarsden

So when I add a single layer DV mp4 created by DVDFab it says the track is unknown.

Originally Posted by cogira

same here with single layer dolby vision mp4 created by dvdfab.

Originally Posted by imhh11

@a5180007 I hope you can make tsmuxer to remux the single layer mp4 to TS or M2TS, that would be really awesome. It would allow Atmos + DV (Even though DVDFAB's single layer remux are probably not true DV, it's still progress.)

Also, it would be nice to have the ability to go from dual-layer mp4 to UHD structure. Now we have to demux the mp4 with dlb_mp4demux and then build the UHD structure with tsmuxer.

@mattmarsden @cogira @imhh11 could you please try latest version nightly-2020-02-24--01-10-05 and report any issue, thanks.

@SeeMoreDigital DoVi descriptors have been added for .ts files. Not for .m2ts files, which stay with HDMV descriptors.

[SeeMoreDigital]

Originally Posted by a5180007

@SeeMoreDigital DoVi descriptors have been added for .ts files. Not for .m2ts files, which stay with HDMV descriptors.

Thanks for letting me know...

[koka]

Look tsmuxerCLI is helper for tsMuxeR - like tsMuxerGUI but CLI

Originally Posted by GeorgeLucas

If I drag an mpls file into the tsmuxer, the German audio tracks and subtitles are only automatically marked, for example.

tsmuxer.py BD/BDMV/PLAYLIST/00000.mpls+ deu.meta =V + =deu ! - deu.iso

[Bandits]

Is there a reason the Dolby Vision tracks are placed as number 1 and the main video tracks are number 2? The PID's are correct, main 4113 and Dolby Vision 4117, but I would think that they would open in the correct order. I understand they can be reordered but shouldn't the default be the correct order or does the order even matter if a PID is used?

[SeeMoreDigital]

Originally Posted by a5180007

@SeeMoreDigital DoVi descriptors have been added for .ts files. Not for .m2ts files, which stay with HDMV descriptors.

I can confirm that I have just used the 'w64-nightly [2020-02-23--01-10-39]' build to re-mux a couple of 'single layer/stream' Dolby Vision.mp4 files to the .ts container, and they work perfectly with my OPPO (and LG TV combination).

I have also used the same build to re-mux a 'double layer/stream' Dolby Vision.mp4 file to the .ts container, and it works perfectly too

In a few hours time I will try the 'w64-nightly [2020-02-24--01-10-05]' build and report back.


Cheers

[a5180007]

Originally Posted by SeeMoreDigital

I have also used the same build to re-mux a 'double layer/stream' Dolby Vision.mp4 file to the .ts container, and it works perfectly too

Good to know. HPC and VLC seem to have problems reading the double layer .ts with Dolby Atmos, I haven't found the cause. If anybody can point me to any professionally produced .ts with double layer DV for comparison...

Originally Posted by SeeMoreDigital

In a few hours time I will try the 'w64-nightly [2020-02-24--01-10-05]' build and report back.

The main change in 02-24 is detection of fragmented MP4. I have tested on few mp4; could anybody report any mp4 not properly detected.