BD Rebuilder Beta - Bug Reports Only

[Crocluvr92]

Well then would you mind telling me what the issue is?

[AmigaFuture]

Hello. With "Labyrinth" the Secondary Video's DTS Express is being removed from the render for the PNP while doing a Full Backup. I cannot get BD-RB to enable it. I'm limited in my lips reading ability. HEHE!

[Options]
VERSION=0.42.0.4
MULTIPROCESS=0
ENABLE_TEST=1
FORCE_NOENCODE=1
MODE=0
ENCODE_QUALITY=5
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=23500
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_PROGRESSIVE=0
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=0
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=1500
QUICK_EXTRAS=0
ENABLE_BLANKING=1
MOVIEONLY_TYPE=0
ALTCRF=20
ALT_TARGET=7900
ALTMETHOD=2
ALTAUTOCROP=0
[Paths]
SOURCE_PATH=J:\!BLU-RAY RIPS\LABYRINTH\
WORKING_PATH=E:\BLU-RAY\REBUILDER\

[AmigaFuture]

Is anyone else noticing Saved Projects aren't being applied when "Opened" again?

[Options]
VERSION=0.42.0.4
MULTIPROCESS=0
ENABLE_TEST=1
FORCE_NOENCODE=1
MODE=1
ENCODE_QUALITY=5
ONEPASS_ENCODING=0
AUTO_QUALITY=0
TARGET_SIZE=23500
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_PROGRESSIVE=0
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
DEINTERLACE=0
SD_TO_1080=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=0
AVCHD=1
REMOVE_WORKFILES=0
MOVIE_ONLY_LOOP=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
USE_LAVF=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
UNMASK_CHAPTER=0
COMPLETION_BEEP=0
DGDECNV=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=1500
QUICK_EXTRAS=1
ENABLE_BLANKING=1
MOVIEONLY_TYPE=0
ALTCRF=20
ALT_TARGET=7900
ALTMETHOD=2
ALTAUTOCROP=0
[Paths]
SOURCE_PATH=J:\!BLU-RAY RIPS\TOY_STORY_3\
WORKING_PATH=E:\BLU-RAY\REBUILDER\
[Batch]
MAIN_MPLS=00200.MPLS
MAIN_MPLS_ANGLE=0
FORCED_SUB=0
FORCED_AUD=0
AUDIO=11111111111111111111111111111111010011101001111111111111111101001101001110100111111
010011010011010011101001101001111010011010011110100111101001101001110100110100111010011010
011110100110100110100111010011010011110100111111111010011010011010011101001111111111111111
110100111010011010011010011010011101001101001101001
SUBS=0100100100100100100100100100100100100100100100100100100100100100100
10010010010010010010001001001001001001001001001001001001001001001001001001001001001001001
001001001001001001001001001001001001001001001001001001001001001001001001001001001001001001
00100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
10000010010010100100100100100100100100100100100100100100100100100100
BLANKED=111111111111111111110111111111010111111101011100000111111110010101000010100001000
10001001000001000000010000001110110001011000010111110010000000000

The BLANKED, SUBS and AUDIO look like binary flags of what's been set to be blanked. I know they're not. When I Open the Project again, after making a change to the config (FORCE_NOENCODE (as an example)), BD-RB reloads the Source and it's anew. If I Open the Saved Project, the modification(s) aren't reflected as I previously selected.
Though it looks to be saved, by the File Keep/Don't Keep (On/Off...1/0).

Any thoughts? A Bug? Or is that not the purpose of BD-RB Saving a Project? Thanks.

[jdobbs]

Those 1's and 0's should represent the on/off settings for all audio/video for all M2TS streams. When you load the project that should all be set to the same settings that were in effect at the point it was saved.

[AmigaFuture]

All video/audio/sup-titles...Agreed. Are they for you, jdobbs? ANYONE else?! BD-RB has access to those locations on my HDDs, no Errors reported when saved.

[setarip_old]

@AmigaFuture

Hi!

Regarding DTS Express audio, did you remember to add the following to your .INI file?:

DTSX_ENABLE=1

[jdobbs]

Originally Posted by AmigaFuture

All video/audio/sup-titles...Agreed. Are they for you, jdobbs? ANYONE else?! BD-RB has access to those locations on my HDDs, no Errors reported when saved.

I have no idea what you are asking when you say "Are they for you, jdobbs?"

The whole purpose of saving/loading a project is so you can make specific settings for a job and load it later -- without having to worry about things. But -- if you then make changes after loading that will make BD-RB reexamine the source (like, for instance, changing from Full to Movie-Only or changing one of the SETUP parameters) -- then you have just rendered the settings back to default and the information from "Load" doesn't apply any longer. You have to make sure you have 100% of the settings you want fixed before doing a "Save".

With that said, I'll do some testing to make sure Load/Save of projects is working correctly.

[jdobbs]

Originally Posted by setarip_old

@AmigaFuture

Hi!

Regarding DTS Express audio, did you remember to add the following to your .INI file?:

DTSX_ENABLE=1

Yep, that's it. The posted INI file doesn't have it set.

[setarip_old]

Hooray, I got one right ;>}

[AmigaFuture]

Originally Posted by setarip_old

@AmigaFuture

Hi!

Regarding DTS Express audio, did you remember to add the following to your .INI file?:

DTSX_ENABLE=1

Ahhh...not in the HIDDENOPTS and I didn't search well enough here. I remembered the conversation.. I shall have BD-RB use it, Thank You.

I did notice this:

QUICK_CRF=n n = 10..50 -- CRF value for "Quick Extras" encoding, defaults are BD5=30,BD9=24,BD25=20
QUICK_USE_QUALITY=n n = 0/1 - if set to 1, BD-RB will use the current quality selection for Quick CRF encodes
EMOVE_OUTPUT=n n = 0/1 - 0=OFF (default) - if set to "1", the OUTPUT folder is removed after burning
REMOVE_WORKING=n n = 0/1 - 0=OFF (default) - if set to "1", the WORKFILES folder is removed after rebuild

Feels like an "R" should be there, hehe.

Update: After adding the option, my Standalone plays the PIP with Sound but PowerDVD 12 doesn't.

[setarip_old]

@AmigaFuture

Ahhh...not in the HIDDENOPTS and I didn't search well enough here. I remembered the conversation.. I shall have BD-RB use it, Thank You.

As always, my pleasure ;>}

BTW, what is the brand and model number of your standalone player (that properly processes DTS Express audio)?

[AmigaFuture]

@setarip_old

You have P.M.s turned off. LG BD590 with a 250GB Hard Drive. The video quality is excellent for BD, however, XviD, DivX, H.264 when played from the HDD doesn't look "as clear" from a BD/AVCHD disk or my HD TVs USB.

@jdobbs

Back to BD-RB. It looks and sounds to play correctly. I've not noticed any sync or jitters with PIP or Movie. I did notice that the DTS isn't re-rendered to AC3 so DTSX_ENABLE=1 is overriding rerender. Personally, that's fine as long as audio is there with video.

[Ch3vr0n]

@Amiga: it doesnt have to. DTS-Express is DTS-Express and AC3 = Dolby Digital Plus. 2 different things

[jdobbs]

Originally Posted by AmigaFuture

@setarip_old

You have P.M.s turned off. LG BD590 with a 250GB Hard Drive. The video quality is excellent for BD, however, XviD, DivX, H.264 when played from the HDD doesn't look "as clear" from a BD/AVCHD disk or my HD TVs USB.

@jdobbs

Back to BD-RB. It looks and sounds to play correctly. I've not noticed any sync or jitters with PIP or Movie. I did notice that the DTS isn't re-rendered to AC3 so DTSX_ENABLE=1 is overriding rerender. Personally, that's fine as long as audio is there with video.

Actually you can't. The secondary tracks require either DTS Express or Dolby Digital Plus -- and there is no freeware encoder for either of those. So secondary audio tracks are never reencoded.

[Crocluvr92]

Ok so here my log, I am having this issue with both Constantine and V for Vendetta, it seems they both crash. Any suggestions? heres my log.

I know I have everything installed correctly but my encoding keeps crashing! Heres my log:

[11/2/12] BD Rebuilder v0.42.04 (beta)
[07:16:19] Source: VOLUME_ID
- Input BD size: 25.50 GB
- Approximate total content: [03:26:52.308]
- Target BD size: 23.30 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[07:16:20] PHASE ONE, Encoding
- [07:26:20] Processing: VID_00003 (1 of 9)
- [07:26:20] Extracting A/V streams [VID_00003]
- [07:26:56] Reencoding video [VID_00003]
- [07:26:56] Reencoding secondary video [TRK_02]
- Encode failed. Aborting.
- BD-Rebuilder v0.42.03 (beta)
- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: 1.9.42.1, Ok
- FFDSHOW: 3882, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- AnyDVD settings check: Ok.
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
[07:59:04] - Failed video encode, aborted

[jdobbs]

Are you overclocked? It looks like it does a couple minutes of encoding before it fails...

[Crocluvr92]

No Im not, what else could be causing this? Both titles have a bonus screen pip secondary video. Is that the cause?

[AmigaFuture]

@Ch3vr0n and jdobbs,

Thank You for the Enlightening information.. Ahhhh...Now I know why BD-RB didn't.

[jdobbs]

Originally Posted by Crocluvr92

No Im not, what else could be causing this? Both titles have a bonus screen pip secondary video. Is that the cause?

It's definitely crashing on the secondary video -- but it is also the first video it is trying, so I'm not sure whether that is significant. Is BD-RB working with other discs?

[Crocluvr92]

Yes, just not these titles:

V for Vendetta
The Matrix
Iron Man 2
Blood Diamond
Constantine