Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
13th October 2009, 12:54 | #1021 | Link | |
AVStoDVD Dev
Join Date: Apr 2006
Location: Italy
Posts: 1,302
|
The bug is here:
Quote:
Thanks for the bug report. Bye |
|
14th October 2009, 06:20 | #1023 | Link |
Registered User
Join Date: Oct 2009
Posts: 6
|
I am fairly noobish to Video editing , and to be honest the only software I have used on a regular bases is Virtual dub and convertx2dvd. I tried to make a DVD from a couple of TV episodes ( avi files) that I downloaded using this guide "AVI to DVD guide" (http://www.doom9.org/) it is a good guide but not noob friendly . I am pretty sure that I followed the guide to a Tee but it turned out to be a fail, I had no sound and was unable to figure out how to add the sound in and burn it to a dvd.
I have only used the AVSto DVD twice and both times the AVStoDVD release 2.2.2 on my windows 7x86 Operating system freezes, but if I let it be it unfreezes it self and works. The other thing is that it burned the dvd without any problems but when I looked at the program itself it was showing that it was still only half way through hehe. not to sure what that is all about. Other then that the program is fast and does its job perfectly ( be sides those two things). I am always downloading my TV episodes and burning them and will keep using this good free program thank you for all of your hard work . |
16th October 2009, 05:24 | #1026 | Link |
Registered User
Join Date: May 2005
Posts: 169
|
MrC I've been doing video conversions and burning for a few years, but I've just started burning double layer DVDs, and I'm also new to AVStoDVD. I'm just wondering if it's a fluke or an issue, as I authored my first DVD9 using AVStoDVD. When I tried to burn with Imgburn I got "no suitable cell for layer break" type message. It suggested some numeric ranges and I manually plugged in a number and it seems to have burned ok. I'm just curious what AVStoDVD does afa layer break information or if there's an option or line I can add to AviSynth script to avoid having to manually add this(or perhaps it was just this particular bunch of titles.. the DVD had 6 titles, sort of an "episodic" DVD .. perhaps the cause of the issue?)
I've tried looking on the web but it seems nebulous if Dual Layer vs Double Layer is a distinction without a difference so I'm confused at this point. Thanks for the program. I've used both QuEnc and HC in the past quite a bit and the way you have it set up with the bit rate ranges is a novel approach.
__________________
"I don't want to belong to any club that would have me as a member." - Groucho Marx |
16th October 2009, 13:06 | #1027 | Link |
AVStoDVD Dev
Join Date: Apr 2006
Location: Italy
Posts: 1,302
|
@MilesAhead
AFAIK there is no way to generally predict what is the best cell to choose as DVD-9 layer break. It depends from the video footage you are burning. Fortunately ImgBurn has a very handy feature (Create Layer Break Position) by which you can directly select the more convenient (for you) cell before burning. More info at ImgBurn forum section. I'm happy you like the bitrate-oriented approach to the encoder selection: I know it can be a little confusing at the beginning, but I think it is a good way to find a compromise between speed (QuEnc CBR) and quality (HCenc VBR). Probably the future implementation of HCenc 0.24 (it has its own, very effective, predictive mode) will cause QuEnc to be "pushed" towards very high bitrate only, or maybe removed at all. Bye |
16th October 2009, 23:01 | #1028 | Link |
Registered User
Join Date: May 2005
Posts: 169
|
Thanks for the reply. I'll experiment but it looks like the newest Imgburn can handle it ok. btw, I like to write small utilities for Windows myself.. esp. small hotkey gizmos. They work kind of like the old Dos TSRs that popped a window up over what you are doing. They are all fully enabled "donation ware." I hope you find one or two useful: http://www.favessoft.com/hotkeys.html
At least if you are running Vista or 7 they look good anyway.
__________________
"I don't want to belong to any club that would have me as a member." - Groucho Marx Last edited by MilesAhead; 16th October 2009 at 23:04. |
17th October 2009, 19:14 | #1029 | Link |
Registered User
Join Date: Jun 2007
Posts: 59
|
I have a question related to dual layer disks. I have an older DVD player and tried burning a DVD 9 disk using Verbatum DVD+DL disk. The resulting DVD played fine in the computer, but not in the DVD. I asked on the IMG forum and they said to check if dual layer was supported in the DVD manual, and it didn't list that disk format. BUT I know the DVD plays factory DVD9 disks. How does that happen? How could a I make a disk LIKE a factory DVD9 disk so the player would read it? At the moment, it can't even detect a disk is in the drive!
|
17th October 2009, 22:50 | #1030 | Link |
Registered User
Join Date: May 2005
Posts: 169
|
You could try setting the Book Type. I know where it is in Imgburn. On the Write page before you start the write there should be a button in the lower right hand corner. Select the appropriate tab for your burner. The setting drop down I believe has DVD-ROM for DVD5 discs and DVD9 or something like that(I can't look without putting a disc in) for double layer. See Imgburn guides for more info.
__________________
"I don't want to belong to any club that would have me as a member." - Groucho Marx |
17th October 2009, 23:15 | #1031 | Link |
Registered User
Join Date: May 2005
Posts: 169
|
afa burning DVD Double Layer with Imgburn and layer break.. I reset chapters to default 5 minutes, used custom Disc size and set to 8000 MB and authored. Imgburn automatically suggested a couple of layer breaks when loading the VIDEO_TS folder. Seems like all went well.
__________________
"I don't want to belong to any club that would have me as a member." - Groucho Marx |
17th October 2009, 23:52 | #1032 | Link | |
Registered User
Join Date: Apr 2004
Location: USA
Posts: 120
|
Quote:
In Womble I need this: Bit rate mode : Constant Bit rate : 5852 Kbps Nominal bit rate : 6200 Kbps Not this: Bit rate mode : Constant Bit rate : 5606 Kbps Nominal bit rate : 9000 Kbps |
|
17th October 2009, 23:59 | #1033 | Link |
Registered User
Join Date: Jun 2007
Posts: 59
|
Thnaks for the type, MilesAhead. I followed one guide that never mentioned the book type. When I checked the other 2 that deal with dual layer disks, they both say to check to make sure it's set to DVD ROM. I am going to give it a try. I wonder if II should do that with DVD 5 disks too?
|
18th October 2009, 01:27 | #1034 | Link |
Registered User
Join Date: Jun 2007
Posts: 59
|
Well, tried it with the book type set and same thing. DVD player just says no disk, but it plays fine in the computer. I would like to make DVD9 disks with AVStoDVD, anyone have any ideas? Or is it just the disk player? Funny thing it reads factory DVD9 disks though.
|
18th October 2009, 13:52 | #1035 | Link |
AVStoDVD Dev
Join Date: Apr 2006
Location: Italy
Posts: 1,302
|
@MysticE
Ok @Richardw322 Do you have the possibility to check the DVD+DL that plays fine on your PC on other standalone DVD players? BTW you should address the question to the proper doom9 forum section. Bye |
18th October 2009, 15:20 | #1036 | Link |
Registered User
Join Date: Jun 2007
Posts: 59
|
No not really. Don't have another in the house!! Everyone else plays on computer. Also, it was just a thought here, I am really doing fine with DVD5, and really shouldn't "rock the boat"
On second thought, maybe I will ask for another opion. I tried in the IMGBURN forum, and the conclusion was my DVD player is not compatible. Don't buy it as it plays factory DVD9. I don't really need it, there is a HTPC connected, but it bugs me. Thanks for the link, MrC Last edited by Richardw322; 18th October 2009 at 15:37. |
19th October 2009, 07:35 | #1037 | Link | |
Registered User
Join Date: Apr 2004
Location: USA
Posts: 120
|
Quote:
|
|
19th October 2009, 23:08 | #1038 | Link |
Registered User
Join Date: Jun 2007
Posts: 59
|
Mystice, that's what I got over in the DVD burning are, it's the player. As I make a lot of TV episode disks from shows I recorded, it would have been nice to make 1 DVD9 rather than 2 DVD5's. No biggie. In fact, I am making one tonight, and using 2.2.2 for the first time. (to get back on topic)
|
22nd October 2009, 14:47 | #1039 | Link |
Registered User
Join Date: Jun 2007
Posts: 31
|
AVStoDVD 2.2.2 is really slow for me (first time I tried AVStoDVD). Just ~25fps with a 2.66GHz Core2Quad and default settings, I tried to convert a 40min 720p MKV (H264+AC3) with QUenc (~24fps) and HCenc (15fps@1-pass) as a test. RipBot264 and DVDRebuilder work with normal speed for me (Win7 Home Premium 64bit). Any ideas what I can do to speed it up or narrow down what causes the slow encoding?
|
22nd October 2009, 20:23 | #1040 | Link |
AVStoDVD Dev
Join Date: Apr 2006
Location: Italy
Posts: 1,302
|
@Mike_111
you should not be surprised that a 720p movie is (decoded and) encoded slowly, even on a quad core. It depends from a lot of factors: installed codecs, system cleanliness, other tasks running in background, etc. You may improve AVStoDVD speed by selecting a different AVS resizer (i.e. BilinearResize) and edit the default encoding settings (toggle on '+Settings'/'Edit encoder command parameters at runtime'). Take note that usually HCenc is faster than QuEnc in multicore systems. BTW, where did you get that mkv footage? Bye |
|
|