BD Rebuilder Beta - Bug Reports Only

[longtom]

Originally Posted by jdobbs

I'd reinstall BD-RB and all its helper apps. It isn't the disc -- I've done that one. The messages aren't the cause of the error either -- as they aren't unusual.

You may want to try running TSMUXER independently and see what is causing it to fail. There is a .meta file that is created just before the demux attempt. In this case it would be called "AUD_00066.META". Depending upon where you installed BD-RB and what your working path is, try this:

1. Run CMD from windows start button (or win icon). This will open up a command window.

2. Set youself to the working folder, then go one layer deeper to WORKFILES.

3. Run this command line (modified base on your paths):

c:\bd_rebuilder\tools\tsmuxer.exe aud_00066.meta

Report what error you get that causes it to abort.

Note: The second error "ExtractAudio Subs() 00053 1605" you are receiving is a result of missing files from the first (failed) attempt.

Hmm, now i get always the Extract Audio Subs error message....

[Blackwalker]

Originally Posted by Blackwalker

Thx a lot, i'll try!!

dont work...
i set "FORCE_ENCODE=1" but the output was always VC1!
damn...

any help?
thx


updated:

my mistake...trying again

[Sharc]

BD-RB 0.34.11.
Prince of Persia (the movie is split into 140 files !)
Movie-only mode, other Movie-Only playlist selected, resize to 720p, BD-5.
The 2 selected subtitles were not extracted correctly. I got 2 sup files of the first movie segment (studio intro) in the workfolder, 0 bytes each. The rest is missing.
No big issue really. Apart from the missing subtitles, everything came out perfectly.

[longtom]

Originally Posted by jdobbs

I'd reinstall BD-RB and all its helper apps. It isn't the disc -- I've done that one. The messages aren't the cause of the error either -- as they aren't unusual.

You may want to try running TSMUXER independently and see what is causing it to fail. There is a .meta file that is created just before the demux attempt. In this case it would be called "AUD_00066.META". Depending upon where you installed BD-RB and what your working path is, try this:

1. Run CMD from windows start button (or win icon). This will open up a command window.

2. Set youself to the working folder, then go one layer deeper to WORKFILES.

3. Run this command line (modified base on your paths):

c:\bd_rebuilder\tools\tsmuxer.exe aud_00066.meta

Report what error you get that causes it to abort.

Note: The second error "ExtractAudio Subs() 00053 1605" you are receiving is a result of missing files from the first (failed) attempt.

Can't detect stream type.
Comes out of the cmd line.

[14:05:29] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[14:05:30] PHASE ONE, Encoding
- [14:05:30] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[14:11:34] - Failed to retrieve audio, aborted

[worknstiff]

@Longtom: Posted from all of your BD_Rebuilder logs: - Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640

I think maybe I am just being dense this morning but when I do movie only encodes all my logs all have something in this Audio section with a (1) in it. My apologies if I am missing something. bye, Worknstiff

[jdobbs]

Originally Posted by Blackwalker

dont work...
i set "FORCE_ENCODE=1" but the output was always VC1!
damn...

any help?
thx


updated:

my mistake...trying again

It works. I use it all the time.

[jdobbs]

Originally Posted by Sharc

BD-RB 0.34.11.
Prince of Persia (the movie is split into 140 files !)
Movie-only mode, other Movie-Only playlist selected, resize to 720p, BD-5.
The 2 selected subtitles were not extracted correctly. I got 2 sup files of the first movie segment (studio intro) in the workfolder, 0 bytes each. The rest is missing.
No big issue really. Apart from the missing subtitles, everything came out perfectly.

That probably means that the subtitles didn't exist in the first segment. I'll look at it, but unfortunately the US version is much different.

[jdobbs]

Originally Posted by longtom

Hmm, now i get always the Extract Audio Subs error message....

You need to start over, it's trying to pick up where it left off -- but it can't because the files are missing.

[gamete]

Originally Posted by Blackwalker

hi!
i'd like to know if this is possible!

If i want to rencode a blu-ray movie, without changing the size and audio,
but i wanna only convert the Video VC1 to H264, what i have to do?

Because if i lower the size, 2-pass, it'll be converted to h264,
but if i left the same size, the program leave the VC1 video track intact!

hope its possible
thx

what is the advantage of this procedure?

sorry for my bad english i'm italian

[longtom]

Originally Posted by jdobbs

You need to start over, it's trying to pick up where it left off -- but it can't because the files are missing.

Can't detect stream type.
Comes out of the cmd line.

[14:05:29] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[14:05:30] PHASE ONE, Encoding
- [14:05:30] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[14:11:34] - Failed to retrieve audio, aborted

[Sharc]

Originally Posted by jdobbs

That probably means that the subtitles didn't exist in the first segment. I'll look at it, but unfortunately the US version is much different.

Subtitles did exist in the first segment (actually the studio intro plus beginning of the movie). It's a weird structure anyway. Don't worry, the issue is not important.

[jdobbs]

Originally Posted by longtom

Can't detect stream type.
Comes out of the cmd line.

[14:05:29] BD Rebuilder v0.34.11 (beta)
- Source: PRINCE_OF_PERSIA
- Input BD size: 23,38 GB
- Approximate total content: [01:55:53.486]
- Target BD size: 45,80 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY mode enabled
- Auto Quality: Good (Very Fast), ABR
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[14:05:30] PHASE ONE, Encoding
- [14:05:30] Extracting A/V streams [VID_00066]
- Extracting A/V to M2TS [VID_00066]
- Extracting A/V from M2TS [VID_00066]
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
- Error in attempt to extract audio/subs.
- H.264 stream does not contain fps field. Muxing fps=23.976
[14:11:34] - Failed to retrieve audio, aborted

Can you send me the meta file? I'd like to look at it. Send to: dvd-rb@dvd-rb.com

[al4x]

FIxed the problem..but

i read on a google search this can keep menus? is this correct?.. when i load the program on its default settings, i see the main menu stream and the main menu stream but as soon as i change the target size from bd9 or bd5 the main menu disappears and im only left with the main movie? [it reappears again if i change it back to bd5/9.. is this a bug or is it intentional?

i want to compress the main movie only but keep the title menu.. is this viable?

also ive been trying to do 2 pass to a custom size but it always says no reencode req'd.. is this a bug? it will reencode if i set it to bd9.. its 23GB in total

[setarip_old]

@al4x

Hi!

I think you may have posted to the wrong thread...

[al4x]

Originally Posted by setarip_old

@al4x

Hi!

I think you may have posted to the wrong thread...

what one i need? or a new thread?

[setarip_old]

@al4x

This thread is exclusively for reporting bugs discovered when beta testing BD Rebuilder...

[Paddy97]

I've tried to create a profile of my own for alternate output. Wanting MKV, 1280x720 and AC3 at 640K.

So I put this into alternate.

[00010]
caption=MKV Container, 1280x720, 640Kbs AC3
vBitrate=1230
aBitrate=640
aType=0
vFormat=4

and the logfile seems OK.

[12:58:51] BD Rebuilder v0.34.11 (beta)
- Source: GOOD_BAD_WEIRD
- Input BD size: 19,11 GB
- Approximate total content: [02:04:42.399]
- Target BD size: 4,36 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- RESIZE 1080p to 720p enabled
- Mode: MKV Container, 1280x720, 640Kbs AC3
- Audio Settings: AC3=1 DTS=0 HD=0 Kbs=640
[12:58:51] PHASE ONE, Encoding
- [12:58:51] Extracting A/V streams [VID_00000]
- [13:11:19] Reencoding: VID_00000 (1 of 1)
- [13:11:19] Collecting video information
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 25,000fps, 187*060 frames
- Convert: 1280x720, 50,000fps, 374*120 frames
- [13:11:19] Reencoding: VID_00000, Pass 1 of 1
- [14:30:03] Video Encode complete
- [14:30:03] Reencoding audio tracks (if req'd)
- [14:33:26] Multiplexing M2TS
[14:33:26]PHASE ONE complete
[14:33:26]PHASE TWO - Rebuild Started
- [14:33:26] Rebuilding stream 00000 [1 of 1]
- [14:33:26] Building ALTERNATE OUTPUT Structure
[14:38:57] - Encode and Rebuild complete
[14:38:57]JOB: GOOD_BAD_WEIRD finished.

But in the end, to my surprise, I got an MP4. What did I do wrong?

[jdobbs]

Originally Posted by Paddy97

I've tried to create a profile of my own for alternate output. Wanting MKV, 1280x720 and AC3 at 640K.

So I put this into alternate.

[00010]
caption=MKV Container, 1280x720, 640Kbs AC3
vBitrate=1230
aBitrate=640
aType=0
vFormat=4

and the logfile seems OK.

[12:58:51] BD Rebuilder v0.34.11 (beta)
- Source: GOOD_BAD_WEIRD
- Input BD size: 19,11 GB
- Approximate total content: [02:04:42.399]
- Target BD size: 4,36 GB
- Windows Version: 6.1 [7600]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- RESIZE 1080p to 720p enabled
- Mode: MKV Container, 1280x720, 640Kbs AC3
- Audio Settings: AC3=1 DTS=0 HD=0 Kbs=640
[12:58:51] PHASE ONE, Encoding
- [12:58:51] Extracting A/V streams [VID_00000]
- [13:11:19] Reencoding: VID_00000 (1 of 1)
- [13:11:19] Collecting video information
- Source Video: MPEG-2, 1920x1080
- Rate/Length: 25,000fps, 187*060 frames
- Convert: 1280x720, 50,000fps, 374*120 frames
- [13:11:19] Reencoding: VID_00000, Pass 1 of 1
- [14:30:03] Video Encode complete
- [14:30:03] Reencoding audio tracks (if req'd)
- [14:33:26] Multiplexing M2TS
[14:33:26]PHASE ONE complete
[14:33:26]PHASE TWO - Rebuild Started
- [14:33:26] Rebuilding stream 00000 [1 of 1]
- [14:33:26] Building ALTERNATE OUTPUT Structure
[14:38:57] - Encode and Rebuild complete
[14:38:57]JOB: GOOD_BAD_WEIRD finished.

But in the end, to my surprise, I got an MP4. What did I do wrong?

You forgot to add "ctype=1", so it defaulted to 0.

Text from the existing ALTERNATE.TXT file:

#  The options below show up in the Alternate Output Dialog
#  Settings:
#  caption=Text to show on alternate selection list
#  vBitrate=Bitrate to use for two-pass video encoding
#  aBitrate=Bitrate to use for audio encoding
#  aType=Output Audio Type, 0=AC3, 1=AAC
#  vFormat=Video Format:  0=320x240/180, 1= 480x360/270, 2= 640x480/360
#                         3= 1024x768/576, 4= 1280x720, 5= 1920x1080
#  cType= Container/limits type, 0=MP4 (iPod), 1=MKV, 2=MP4 (iPad)

[Paddy97]

Originally Posted by jdobbs

You forgot to add "ctype=1", so it defaulted to 0.

Thanks! Sorry for making such a simple mistake.

[jdobbs]

That's why we're here.