Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
1st April 2019, 02:36 | #21 | Link |
Registered User
Join Date: May 2016
Location: Long Beach, CA, USA
Posts: 620
|
From what I've been reading on AVS all these years, the Sony is that much better, yes. But they're the same if you don't use any interpolation, that's the thing. I'm curious what you had de-judder set to when you tried it. I've slowly moved my way up, and I've been happy at 5 for a long time. I do notice the occasional artifact, sure, but it doesn't bother me enough to turn it back down. I cannot stand the stutter.
__________________
Henry | LG OLED65C7P | Denon AVR-X3500H | ELAC Uni-Fi x7 | ELAC Debut 2.0 SUB3030 x2 | NVIDIA SHIELD TV Pro 2019 | Plex |
3rd April 2019, 18:02 | #23 | Link | |
ангел смерти
Join Date: Nov 2004
Location: Lost
Posts: 9,558
|
Quote:
|
|
7th April 2019, 21:58 | #26 | Link |
Derek Prestegard IRL
Join Date: Nov 2003
Location: Los Angeles
Posts: 5,988
|
I'm not entirely sure, to be honest. I can attest that on both my LG OLEDs and my desktop 144 Hz gaming monitor the 24p stutter is absolutely brutal in camera pans, even with the displays running at 24 Hz.
I'm not aware of a high end display (especially one that has HDR) that is free from this issue today. @foxyshadis how does MadVR help in this case? |
8th April 2019, 00:46 | #27 | Link |
Registered Developer
Join Date: Mar 2010
Location: Hamburg/Germany
Posts: 10,342
|
Running high refresh rate input to the screen and using madVR Smooth Motion might prevent that issue, at the expense of sharpness.
The stutter from Low Framerate Input is unfortunately a side-effect of our display technology getting better. Really good ways to resolve that have not been developed quite yet.
__________________
LAV Filters - open source ffmpeg based media splitter and decoders |
8th April 2019, 02:25 | #28 | Link | |
Registered User
Join Date: May 2013
Posts: 706
|
Quote:
__________________
Ghetto | 2500k 5Ghz |
|
8th April 2019, 10:59 | #29 | Link |
Registered User
Join Date: Oct 2012
Posts: 7,903
|
smoothmotion at high refresh rates is kind of an no brainer and doesn't really have the sharpness loss issues the blended frames are shown for a to short time it's less then 7 ms.
and i have a hard time seeing this changing the stutter issue if you are watching 24p content at 144 hz you can get blended frames with 95% of one frame so this shouldn't blur motion or you can get the "worst" case with 50% and the most important part this will change every time you play the same file. is stutter really an issue from new display technology we had CRT in the past with even faster response times with backlightstrobing. |
8th April 2019, 12:45 | #30 | Link | |
Registered Developer
Join Date: Mar 2010
Location: Hamburg/Germany
Posts: 10,342
|
Quote:
As such, smooth motion can help, as it reduces the "hold time" of each 24p frame by filling the gaps with blended frames. You get significantly less sudden jumps between frames, less perceived stutter. A perfect BFI implementation would also help, if it doesn't result in losing too much brightness. BFI helps because when the image is turned off, our brain starts to interpolate between images - which doesn't work when the image is still being shown. The BFI on my Sony TV makes motion super clear and fluid, its like magic. Unfortunately the brightness loss is quite strong, so I don't use it. But newer TVs cope much better with the brightness problem. CRTs didn't suffer from this issue at all, its purely a characteristic of Sample-and-Hold displays. The way CRTs scan the image allowed our eye interpolation to function, in a similar manner as BFI tries to replicate, because pixels are not always "on".
__________________
LAV Filters - open source ffmpeg based media splitter and decoders Last edited by nevcairiel; 8th April 2019 at 12:53. |
|
8th April 2019, 13:44 | #31 | Link |
Registered User
Join Date: Oct 2012
Posts: 7,903
|
the problem with smoothmotion is it doesn't do that for every frame.
if you get 50% blended frames yes you get a result like a lower response time of about 7 ms on a 144 hz display but if the blended frames are 95& to 5% there is no real difference even using smoothmotion you can end up watching a whole movie with 98% to "% blended frames so there is pretty much no difference between SM on or off and this will change every time you start playback. so i have a huge problem seeing how this will lower stuttering as the results vary heavily. i'm personally not affect by the stuttering from response times and i like BFI at at least 120 hz to stop the flickering and to have the sharp motion. |
8th April 2019, 16:14 | #32 | Link | ||
Registered User
Join Date: Mar 2002
Posts: 2,323
|
Quote:
I just watched couple of 23p content during the weekend (65B8) with RealCiname On and I didn't see stutter, it was smooth as butter, maybe too smooth as well I just found this - not too old - thread and people still can't decide what RealCiname does. I thought I knew it with my previous LG CCFL LCD TV, but I'm not sure anymore Quote:
A month ago I set up custom refresh rates for my 1080p monitor (VA panel, nothing special) for 23/24p content with the help of madVR (47.9xx/48Hz) and it produced massive stutter in panning scenes, I was shocked.
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config |
||
8th April 2019, 17:18 | #34 | Link |
Registered User
Join Date: Mar 2002
Posts: 2,323
|
How do you check this?
__________________
Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) | madvr config |
9th April 2019, 02:02 | #36 | Link |
QB the Slayer
Join Date: Feb 2011
Location: Toronto
Posts: 697
|
LG's Real Cinema is used to remove Judder not Stutter... From RTings review of the C8:
24p Judder I am currently trying it out with OTA HDTV... not sure if I want to use it yet for PC input QB EDIT: LOL... I'm still such a newb with my 5 day old C8... Real Cinema, De-Judder and De-Blur... PC input has none of those :P
__________________
Last edited by QBhd; 9th April 2019 at 03:30. |
9th April 2019, 09:08 | #37 | Link |
Registered Developer
Join Date: Mar 2010
Location: Hamburg/Germany
Posts: 10,342
|
24p Judder removal is a must with every new TV. If it cannot do that, it fails a basic requirement.
Judder-free playback is basically simply the ability to drive the panel at 24Hz (or a multiplier off of it), so that frame times are constant. Bonus points for support of IVTC in 60p signals. However, "Stutter" is different from "Judder". It has its own categeory on RTings as well, and OLEDs usually fare terrible in it, due to their really fast response time. "Judder" is an un-even motion effect, which is far more obvious to many people, while "Stutter" is even and regular, but just not overly smooth when you notice it (many people are not that bothered by it).
__________________
LAV Filters - open source ffmpeg based media splitter and decoders Last edited by nevcairiel; 9th April 2019 at 09:16. |
9th April 2019, 09:36 | #38 | Link |
Registered User
Join Date: Oct 2012
Posts: 7,903
|
because it is part of the topic.
judder free TVs are sadly not as common as they should be and TVs that are judder free with PC mode are pretty rare. 2018 was terrible in this regard with all these native 60 hz panels. small example: https://www.rtings.com/tv/reviews/samsung/nu7100 with the better tested TV only sony was able to do something like 48 hz with 60 hz panels the rest pretty much failed. rtings doesn't put much worth on to something as essential as this and labels it as "Most people aren't very sensitive to judder and won't see it." seriously? brands which have reliable PC modes for all refreshrates are: Philips and sony. if you know more brands that have a PC mode that works at all refeshrates feel free to add them stuff like this isn't tested on rtings while high refreshrate PC mode is tested. i can tell that panasonic is intentional doing this wrong. |
9th April 2019, 13:29 | #39 | Link | |
Registered User
Join Date: Jan 2008
Posts: 589
|
Quote:
The mpv wiki has a very interesting discussion of these approaches. I think it would be interesting to see the "convolution" approach implemented in madVR. Last edited by e-t172; 9th April 2019 at 14:03. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|