MkvТоMp4 v0.224 - rapid tool for repack Mkv to Mp4 - Page 5

Paddy97 · 13th April 2012, 21:32

If the source is interlaced how do I add deinterlacing to the video encode?

millercentral · 14th April 2012, 23:32

I noticed that file paths are using forward-slashes ("/") instead of ("\"). While this works okay for local files, it fails for networking paths. Can you change it so directories are separated by backward-slashes ("\") instead of forward-slashes?

oreons · 15th April 2012, 10:08

Paddy97,
For converting interlace-progressive need to run encoding, repacking will not work.

millercentral,
Network paths are supported, see the picture.

Paddy97 · 15th April 2012, 12:41

Quote:

Originally Posted by oreons

Paddy97,
For converting interlace-progressive need to run encoding, repacking will not work.

The source I was trying with is MPEG2 so it will be recoded. Use the standards, the output is still interlaced.

oreons · 15th April 2012, 15:09

Paddy97,
The output is interlace? Do you have a sample for testing?

Paddy97 · 15th April 2012, 15:37

Quote:

Originally Posted by oreons

Paddy97,
The output is interlace? Do you have a sample for testing?

Sure, here you have a clip.

http://www.mediafire.com/?598883j3rfbkc8c

oreons · 15th April 2012, 16:18

At the output progressive video.

Code:

Complete name                            : D:\Trollkarlens Hemligheter.s01e07 (03).m4v
Format                                   : MPEG-4
Codec ID                                 : M4V 
File size                                : 131 MiB
Duration                                 : 6mn 23s
Overall bit rate mode                    : Variable
Overall bit rate                         : 2 866 Kbps
Encoded date                             : UTC 2012-04-14 15:07:41
Tagged date                              : UTC 2012-04-14 15:07:41
Writing application                      : MkvToMp4 [www.mkvtomp4.ru] version 0.219

Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High@L4.1
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 4 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 6mn 23s
Bit rate                                 : 2 693 Kbps
Maximum bit rate                         : 7 616 Kbps
Width                                    : 720 pixels
Height                                   : 576 pixels
Display aspect ratio                     : 16:9
Original display aspect ratio            : 16:9
Frame rate mode                          : Constant
Frame rate                               : 25.000 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.260
Stream size                              : 123 MiB (94%)
Writing library                          : x264 core 116 r2057 0ba8a9c
Encoding settings                        : cabac=1 / ref=1 / deblock=1:0:0 / analyse=0x3:0x3 / me=dia / subme=1 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=1 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=crf / mbtree=0 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00
Language                                 : English
Encoded date                             : UTC 2012-04-14 15:07:41
Tagged date                              : UTC 2012-04-14 15:07:44

Paddy97 · 15th April 2012, 16:36

Ok, I see that. But if you look at the output it still looks interlaced. How do I remove that effect from the output?

There where some intersting parts in this thread since the source id DVB-T

http://forum.doom9.org/showthread.php?t=164682

Atak_Snajpera · 15th April 2012, 18:05

in command line you forgot --tff

Paddy97 · 15th April 2012, 20:32

Quote:

Originally Posted by Atak_Snajpera

in command line you forgot --tff

Thanks for the tip! Just tried that. With this source it did not do anything.

Atak_Snajpera · 16th April 2012, 16:07

did you removed --no-interlaced command first?

Faleny · 16th April 2012, 16:29

hello! I'm from Brazil, I can not speak English, so I'm using a translator, so please have patience with me

I loved this topic, and this program, but I'm having the following problem:
"FFmpeg terminated with error: 1"
if I put several files to be converted in a row, several of them give an error in converting the audio, leaving the final file without sound, but if I put one at a time, there occurs less frequently, in this case was vorbis, but I think also happened to acc,, will have to correct this error?

thank you for your attention

Paddy97 · 16th April 2012, 18:54

Quote:

Originally Posted by Atak_Snajpera

did you removed --no-interlaced command first?

Did that but on this source its of no effect.

If I select deinterlace in ripbot it works great btw and the size of the file is reduced in half due to the corrected picture.

oreons · 16th April 2012, 19:58

Faleny,
Do you have a sample file, which is encoded with an error?

Paddy97,
For high-quality deinterlacing should be used AviSynch filters, my program does not support it.

oreons · 28th April 2012, 10:51

Version 0.220 - http://www.mediafire.com/?kxfjeg3qeknqakn

New in version:

1. Searching tags on sites TheTvDB and TheMovieDB.

To use searching must be fill the correct fields in the proxy settings, if it is used.

2. Select searching language in the program settings.

3. Loading artworks when searching tags and choose to use them.

This creates a cache of downloaded artworks in a temporary directory and re-search, artwork will be loaded from the cache.

4. Ability to search tags for a few episodes of a TV series in a single operation.

It is necessary select all of the series and click search, then the information on the series will be written into each file.

5. Jump to the IMDb site to search for information.

6. Ability to shutdown Windows after the end of the encoding.
First you need to put a flag in the settings "Enable windows shutdown button"

After that when you start encoding "Shutdown" button will be displayed.

If you click it, then the computer will be turned off after the end of the process.

7. Moving for files from the window tag editing. When you move the current tags are saved and is moved to the next or previous file.

8. Identify and record a new tag HD 1080p

9. Setting up the possibility of enable tags, and the enable optimization when loading a file.

10. If you move the mouse over the tag, it displays its contents in a window.

11. Ability to make Paypal donations to the program development.

12. Using a newer version of FFMpeg and Mp4Box

eckyecky · 29th April 2012, 14:37

You need to change the command for setting the level. There shouldnt be a decimal point in it. Using "...:level=4.1:..." sets it to High@L0.4 use "...:level=41:..."

But otherwise cheers for an awesome program

oreons · 1st May 2012, 16:27

This is equivalent, see the log:
1. Tools\x264\x264 --crf 20.000 --preset superfast --no-interlaced --profile high --level 4.1 -o "Temp\video.h264" "D:/Video/76889.mov"
ffms [info]: 480x360p 0:1 @ 24004/1001 fps (vfr)
resize [warning]: converting from yuvj420p to yuv420p
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
x264 [info]: profile High, level 4.1

2. Tools\x264\x264 --crf 20.000 --preset superfast --no-interlaced --profile high --level 41 -o "Temp\video.h264" "D:/Video/76889.mov"
ffms [info]: 480x360p 0:1 @ 24004/1001 fps (vfr)
resize [warning]: converting from yuvj420p to yuv420p
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
x264 [info]: profile High, level 4.1

Mr. Monte · 1st May 2012, 20:16

Question....I see the default AAC encoder is now Quicktime (might have been in past..not sure). Some time back...peeps advised that the Nero AAC encoder did a better job. Is Nero still the preferred?...or has Apple gotten better?

eckyecky · 2nd May 2012, 02:38

Quote:

Originally Posted by oreons

This is equivalent, see the log:
1. Tools\x264\x264 --crf 20.000 --preset superfast --no-interlaced --profile high --level 4.1 -o "Temp\video.h264" "D:/Video/76889.mov"
ffms [info]: 480x360p 0:1 @ 24004/1001 fps (vfr)
resize [warning]: converting from yuvj420p to yuv420p
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
x264 [info]: profile High, level 4.1

2. Tools\x264\x264 --crf 20.000 --preset superfast --no-interlaced --profile high --level 41 -o "Temp\video.h264" "D:/Video/76889.mov"
ffms [info]: 480x360p 0:1 @ 24004/1001 fps (vfr)
resize [warning]: converting from yuvj420p to yuv420p
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
x264 [info]: profile High, level 4.1

The command in question is to MP4Box when it muxes extracted videos without conversion. It keeps exporting Level 0.4 instead of Level 4.1

Code:

Tools\MP4Box\MP4Box.exe -new -delay 1=1 -add "Temp\video.264":fps=25.000:lang=eng:level=4.1:name="" -add "D:/mkvtomp4/MkvToMp4_0.220/Temp/test.AC3"#1:fps=25.000:lang=eng:name="" -add "D:/mkvtomp4/MkvToMp4_0.220/Temp/test_internal_sub_2_change.ttxt":lang=eng:name="" -itags tool="MkvToMp4 [www.mkvtomp4.ru] version 0.220" "D:/mkvtomp4\test.m4v"

Highlighted bit should be 41 not 4.1

oreons · 2nd May 2012, 09:51

eckyecky,
Thanks, I will correct in next version.

Mr. Monte,
QT more quality at the same bitrate.
http://forum.doom9.org/showthread.php?t=161957

15th April 2012, 16:36	#88 \| Link
Paddy97 Registered User Join Date: Oct 2006 Posts: 70	Ok, I see that. But if you look at the output it still looks interlaced. How do I remove that effect from the output? There where some intersting parts in this thread since the source id DVB-T http://forum.doom9.org/showthread.php?t=164682 Last edited by Paddy97; 15th April 2012 at 16:53.

15th April 2012, 18:05	#89 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,885	in command line you forgot --tff __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

16th April 2012, 16:07	#91 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,885	did you removed --no-interlaced command first? __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

16th April 2012, 16:29	#92 \| Link
Faleny Registered User Join Date: Apr 2012 Posts: 1	hello! I'm from Brazil, I can not speak English, so I'm using a translator, so please have patience with me I loved this topic, and this program, but I'm having the following problem: "FFmpeg terminated with error: 1" if I put several files to be converted in a row, several of them give an error in converting the audio, leaving the final file without sound, but if I put one at a time, there occurs less frequently, in this case was vorbis, but I think also happened to acc,, will have to correct this error? thank you for your attention Last edited by Faleny; 16th April 2012 at 16:33.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13th April 2012, 21:32	#81 \| Link
Paddy97 Registered User Join Date: Oct 2006 Posts: 70	If the source is interlaced how do I add deinterlacing to the video encode?

14th April 2012, 23:32	#82 \| Link
millercentral Registered User Join Date: Jan 2009 Posts: 5	I noticed that file paths are using forward-slashes ("/") instead of ("\"). While this works okay for local files, it fails for networking paths. Can you change it so directories are separated by backward-slashes ("\") instead of forward-slashes?

15th April 2012, 10:08	#83 \| Link
oreons MkvToMp4 author Join Date: Nov 2011 Location: Russia Posts: 105	Paddy97, For converting interlace-progressive need to run encoding, repacking will not work. millercentral, Network paths are supported, see the picture.

15th April 2012, 15:09	#85 \| Link
oreons MkvToMp4 author Join Date: Nov 2011 Location: Russia Posts: 105	Paddy97, The output is interlace? Do you have a sample for testing?

16th April 2012, 19:58	#94 \| Link
oreons MkvToMp4 author Join Date: Nov 2011 Location: Russia Posts: 105	Faleny, Do you have a sample file, which is encoded with an error? Paddy97, For high-quality deinterlacing should be used AviSynch filters, my program does not support it.

28th April 2012, 10:51	#95 \| Link
oreons MkvToMp4 author Join Date: Nov 2011 Location: Russia Posts: 105	Version 0.220 - http://www.mediafire.com/?kxfjeg3qeknqakn New in version: *1. Searching tags on sites TheTvDB and TheMovieDB.* To use searching must be fill the correct fields in the proxy settings, if it is used. 2. Select searching language in the program settings. 3. Loading artworks when searching tags and choose to use them. This creates a cache of downloaded artworks in a temporary directory and re-search, artwork will be loaded from the cache. *4. Ability to search tags for a few episodes of a TV series in a single operation.* It is necessary select all of the series and click search, then the information on the series will be written into each file. 5. Jump to the IMDb site to search for information. 6. Ability to shutdown Windows after the end of the encoding. First you need to put a flag in the settings "Enable windows shutdown button" After that when you start encoding "Shutdown" button will be displayed. If you click it, then the computer will be turned off after the end of the process. 7. Moving for files from the window tag editing. When you move the current tags are saved and is moved to the next or previous file. *8. Identify and record a new tag HD 1080p* 9. Setting up the possibility of enable tags, and the enable optimization when loading a file. 10. If you move the mouse over the tag, it displays its contents in a window. 11. Ability to make Paypal donations to the program development. 12. Using a newer version of FFMpeg and Mp4Box

29th April 2012, 14:37	#96 \| Link
eckyecky Registered User Join Date: Apr 2006 Posts: 6	You need to change the command for setting the level. There shouldnt be a decimal point in it. Using "...:level=4.1:..." sets it to High@L0.4 use "...:level=41:..." But otherwise cheers for an awesome program

1st May 2012, 16:27	#97 \| Link
oreons MkvToMp4 author Join Date: Nov 2011 Location: Russia Posts: 105	This is equivalent, see the log: 1. Tools\x264\x264 --crf 20.000 --preset superfast --no-interlaced --profile high --level 4.1 -o "Temp\video.h264" "D:/Video/76889.mov" ffms [info]: 480x360p 0:1 @ 24004/1001 fps (vfr) resize [warning]: converting from yuvj420p to yuv420p x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 x264 [info]: profile High, level 4.1 2. Tools\x264\x264 --crf 20.000 --preset superfast --no-interlaced --profile high --level 41 -o "Temp\video.h264" "D:/Video/76889.mov" ffms [info]: 480x360p 0:1 @ 24004/1001 fps (vfr) resize [warning]: converting from yuvj420p to yuv420p x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 x264 [info]: profile High, level 4.1

1st May 2012, 20:16	#98 \| Link
Mr. Monte Registered User Join Date: Feb 2005 Posts: 350	Question....I see the default AAC encoder is now Quicktime (might have been in past..not sure). Some time back...peeps advised that the Nero AAC encoder did a better job. Is Nero still the preferred?...or has Apple gotten better?

2nd May 2012, 09:51	#100 \| Link
oreons MkvToMp4 author Join Date: Nov 2011 Location: Russia Posts: 105	eckyecky, Thanks, I will correct in next version. Mr. Monte, QT more quality at the same bitrate. http://forum.doom9.org/showthread.php?t=161957