BD-Rebuilder, Feature Requests - Page 18

spotswood · 12th March 2010, 03:50

Quote:

Originally Posted by jdobbs

You can't do it for BD-5/9 because the files have to be reencoded. The maximum bitrate is too high for BD-5/9 on the oriignal. Most of the time it will just freeze.

Another quick question if you don't mind... a couple menus I've encountered still have LPCM audio @ 1500kbps (according to TMT3) after being reencoded to BD9. Should BDrebuilder be converting the menu audio to AC3 at a lower bitrate if I'm selecting BD9? Or should I not be concerned with that? Thanks again for your help...

jdobbs · 12th March 2010, 05:39

Quote:

Originally Posted by spotswood

Another quick question if you don't mind... a couple menus I've encountered still have LPCM audio @ 1500kbps (according to TMT3) after being reencoded to BD9. Should BDrebuilder be converting the menu audio to AC3 at a lower bitrate if I'm selecting BD9? Or should I not be concerned with that? Thanks again for your help...

No, it should remain as-is. Menus have to be treated differently.

spotswood · 13th March 2010, 01:26

Quote:

Originally Posted by jdobbs

No, it should remain as-is. Menus have to be treated differently.

OK. Thanks again...

mpiper · 13th March 2010, 06:01

Jdobbs,
Is there a chance to add 256 or 384 kbps to the AC3 re-encoding? I'm looking at making DVD-5 backups of my HD-DVD movies, and would like to use the following specs (which I've used withanother prog, but I like the results of your encoder settings better.) 1280X720 23.976fps, 5.1 256kbps AC3, Movie only. Dropping the audio allows more headroom for the video, which is more important to me on a small dvd-5 backup.

Thanks for the great program!

jdobbs · 13th March 2010, 15:09

Quote:

Originally Posted by mpiper

Jdobbs,
Is there a chance to add 256 or 384 kbps to the AC3 re-encoding? I'm looking at making DVD-5 backups of my HD-DVD movies, and would like to use the following specs (which I've used withanother prog, but I like the results of your encoder settings better.) 1280X720 23.976fps, 5.1 256kbps AC3, Movie only. Dropping the audio allows more headroom for the video, which is more important to me on a small dvd-5 backup.

Thanks for the great program!

Hmm... no reason I can think of not to drop it. But once you get below 448Kbs for 5.1 the audio quality noticably drops. It might be better to downmix to stereo w/surround.

Sharc · 13th March 2010, 16:52

For a 2 hours movie on a DVD5 the bitrate increase for the video at the expense of the audio isn't too exciting: about 1.5% (per audio track) when reducing from 448 to 384, and 4.5% when reducing 448 to 256. The loss in audio quality is probably more critical than the gain in video quality, I would say.

HDMadness · 13th March 2010, 19:27

First of all thank you for your hard work and great piece of software you've created!
Just one simple request if possible. I've come across some situations when keeping the lossless audio track from the original blu-ray into a BD9 would not hurt the video bitrate (small movies for example) and it would be nice if you could made available the option to keep HD audio in the process of making bd9's. Thanks in advance.

Cheers

Discoboy · 14th March 2010, 14:00

Hi jdobbs,

Can you add the option to allow the use of the x64 bit version of x264 r1471 (NAL-HRD v1.32 patched) in a similar way that Ripbot264 allows you to use the x64 bit version?

As I do see a up to 10% speed increase during encoding when using the x64 bit version.

jdobbs · 14th March 2010, 15:49

Quote:

Originally Posted by Discoboy

Hi jdobbs,

Can you add the option to allow the use of the x64 bit version of x264 r1471 (NAL-HRD v1.32 patched) in a similar way that Ripbot264 allows you to use the x64 bit version?

As I do see a up to 10% speed increase during encoding when using the x64 bit version.

It don't think it works with AVISYNTH, but I'll try it.

turbojet · 16th March 2010, 06:23

There's avisynth64 being worked on, the few filters BDRB uses are available. Also if you don't resize or deinterlace you can feed the m2ts into x264 directly and get another 5-10% speed increase without depending on haali, avisynth, directshow.

PhilippeB · 19th March 2010, 16:59

For years i have used 'VoB Blanked' to do my DVDs. What i like about this program is that i can keep the menus, and get rid of everything else (except the movie of course

.

That would be a nice 'In between' option in BD-RB, not having to choose between a Full movie (unacceptable image quality - too much compression needed) and Movie only (Very nice, but still - it's a shame to loose theses nice HD menus).

Just being able to 'Blank' the video segments we don't want manually, and re-link the BD-Menu to itself when accessing it would do the trick.

Of course i have no knowledge of what it implies so don't want to make it sound too easy. Just a though.

deank · 21st March 2010, 14:00

Until jdobbs implements it in BD-Rebuilder you can try/test multiAVCHD and blank all things not needed and then process the disc in BD-Rebuilder.

Discoboy · 28th March 2010, 19:20

Quote:

Originally Posted by jdobbs

It don't think it works with AVISYNTH, but I'll try it.

Or use avs2yuv to pipe the videostream from the 32 bit avisynth to the 64 bit x264 in the same why RipBot264 does...

setarip_old · 28th March 2010, 19:52

@deank

Hi!

Quote:

Until jdobbs implements it in BD-Rebuilder you can try/test multiAVCHD and blank all things not needed and then process the disc in BD-Rebuilder.

Can that be done so as to preserve the original menu(s)?

deank · 29th March 2010, 18:48

Yes, since January 2010. You even commented it

Link #1

Link #2

Dean

setarip_old · 30th March 2010, 22:42

@deank

You'll get old too! - Would you believe I overlooked the opening sentence of the post I commented on?

jdobbs · 2nd April 2010, 14:42

Quote:

Originally Posted by setarip_old

@deank

You'll get old too! - Would you believe I overlooked the opening sentence of the post I commented on?

Hell, I can't even remember what forum I'm in right now.

mrickman · 3rd April 2010, 15:54

Quote:

Originally Posted by PNYBOY

I second this request

I third (or more) this request...

jdobbs · 3rd April 2010, 17:08

Quote:

Originally Posted by mrickman

I third (or more) this request...

Wish I knew what it was, I might "fourth" it...

I went back several pages and didn't see it.

Discoboy · 3rd April 2010, 18:08

Quote:

Originally Posted by jdobbs

Wish I knew what it was, I might "fourth" it...

I went back several pages and didn't see it.

Way back........ post #13:

http://forum.doom9.org/showthread.ph...88#post1233988

14th March 2010, 14:00	#348 \| Link
Discoboy Registered User Join Date: Oct 2001 Location: UK Posts: 131	To allow the use of the x64 bit version of x264 request Hi jdobbs, Can you add the option to allow the use of the x64 bit version of x264 r1471 (NAL-HRD v1.32 patched) in a similar way that Ripbot264 allows you to use the x64 bit version? As I do see a up to 10% speed increase during encoding when using the x64 bit version.

19th March 2010, 16:59	#351 \| Link
PhilippeB Registered User Join Date: Oct 2009 Posts: 53	Keeping Menus, getting rid of the rest For years i have used 'VoB Blanked' to do my DVDs. What i like about this program is that i can keep the menus, and get rid of everything else (except the movie of course . That would be a nice 'In between' option in BD-RB, not having to choose between a Full movie (unacceptable image quality - too much compression needed) and Movie only (Very nice, but still - it's a shame to loose theses nice HD menus). Just being able to 'Blank' the video segments we don't want manually, and re-link the BD-Menu to itself when accessing it would do the trick. Of course i have no knowledge of what it implies so don't want to make it sound too easy. Just a though.

21st March 2010, 14:00	#352 \| Link
deank Programmer (or just 教务长) Join Date: Oct 2008 Location: Valencia, Spain Posts: 4,251	Until jdobbs implements it in BD-Rebuilder you can try/test multiAVCHD and blank all things not needed and then process the disc in BD-Rebuilder. __________________ multiAVCHD - donate \| popBD \| uncropMKV \| mkv2avi \| easySUP

29th March 2010, 18:48	#355 \| Link
deank Programmer (or just 教务长) Join Date: Oct 2008 Location: Valencia, Spain Posts: 4,251	Yes, since January 2010. You even commented it Link #1 Link #2 Dean __________________ multiAVCHD - donate \| popBD \| uncropMKV \| mkv2avi \| easySUP

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13th March 2010, 06:01	#344 \| Link
mpiper Registered User Join Date: Jan 2005 Posts: 90	Jdobbs, Is there a chance to add 256 or 384 kbps to the AC3 re-encoding? I'm looking at making DVD-5 backups of my HD-DVD movies, and would like to use the following specs (which I've used withanother prog, but I like the results of your encoder settings better.) 1280X720 23.976fps, 5.1 256kbps AC3, Movie only. Dropping the audio allows more headroom for the video, which is more important to me on a small dvd-5 backup. Thanks for the great program!

13th March 2010, 16:52	#346 \| Link
Sharc Registered User Join Date: May 2006 Posts: 3,997	For a 2 hours movie on a DVD5 the bitrate increase for the video at the expense of the audio isn't too exciting: about 1.5% (per audio track) when reducing from 448 to 384, and 4.5% when reducing 448 to 256. The loss in audio quality is probably more critical than the gain in video quality, I would say.

13th March 2010, 19:27	#347 \| Link
HDMadness Registered User Join Date: Apr 2009 Posts: 4	First of all thank you for your hard work and great piece of software you've created! Just one simple request if possible. I've come across some situations when keeping the lossless audio track from the original blu-ray into a BD9 would not hurt the video bitrate (small movies for example) and it would be nice if you could made available the option to keep HD audio in the process of making bd9's. Thanks in advance. Cheers

16th March 2010, 06:23	#350 \| Link
turbojet Registered User Join Date: May 2008 Posts: 1,840	There's avisynth64 being worked on, the few filters BDRB uses are available. Also if you don't resize or deinterlace you can feed the m2ts into x264 directly and get another 5-10% speed increase without depending on haali, avisynth, directshow.

30th March 2010, 22:42	#356 \| Link
setarip_old Registered User Join Date: Aug 2005 Posts: 16,267	@deank You'll get old too! - Would you believe I overlooked the opening sentence of the post I commented on?