tsMuxeR update for 3D blu-ray - Page 35

Blackwalker · 13th November 2013, 20:11

Quote:

Originally Posted by Blackwalker

i dont understand why this happen, while with old version was all ok!
For example i want to have only the video, my audio Language and subtitle files only!
So:

- I extract the "SRT forced" file from the movie file (example: mkv file) using MKVExtractGUI2.exe

then with tsmuxer:

- I open the movie file (example: mkv file)
- I remove, ALL except "movie and my Language" (i remove also all subtitles) from "tracks"
- then i add the "single SRT file" and the program say that i alread have this file...!!!

how is this possible if i deselct it from "tracks" and i add as a new file??

With tsmuxer 1.10.6 dont happen!!!!

Can you please check this?
thanks

nothing about this?

rik1138 · 13th November 2013, 22:21

Physic, this is awesome... I had no idea you were even working on this and came here looking for an easier to way to make a simple straight-play 3D disc...

Works great with video files created with Rovi's TotalCode software too.

Two tiny requests?
1- Add an option to remove the replay at the end of the video (so the discs just stops instead of looping) (Not sure if there's a way to do this already, but didn't see it)
2- When doing a Blu-ray ISO, maybe an option to point to a pre-created folder containing the META info? I can create the content (the DL folder and files), just need a way to add it into the ISO...

Obviously frivolous stuff for when you have a chance, not sure if they were mentioned before as I didn't read the whole thread... Just thought I'd throw it out there.

Rik

HWK · 13th November 2013, 22:39

Quote:

Originally Posted by rik1138

Physic, this is awesome... I had no idea you were even working on this and came here looking for an easier to way to make a simple straight-play 3D disc...

Works great with video files created with Rovi's TotalCode software too.

Two tiny requests?
1- Add an option to remove the replay at the end of the video (so the discs just stops instead of looping) (Not sure if there's a way to do this already, but didn't see it)
2- When doing a Blu-ray ISO, maybe an option to point to a pre-created folder containing the META info? I can create the content (the DL folder and files), just need a way to add it into the ISO...

Obviously frivolous stuff for when you have a chance, not sure if they were mentioned before as I didn't read the whole thread... Just thought I'd throw it out there.

Rik

Rik, you are first person to mention these points. However final call has to made by physic himself.

Video Dude · 14th November 2013, 03:11

Quote:

Originally Posted by Rigor

Speaking of super old bugs, could we get a fix for compressed headers that cause this bug, please? This has been plaguing the community for years now:

"Matroska parse error: invalid H264 NAL unit size. NAL unit truncated."

I could eliminate a bunch of automation with this one minor detail.

I'm begging. Literally.

Quote:

Originally Posted by Rigor

Am I asking for something taboo, here? Or is there some sort of obvious fix that I'm missing?

tsmuxer does display the error "Matroska parse error: invalid H264 NAL unit size. NAL unit truncated." when the mkv input video has header compression.

The only fix right now is to remux the mkv with header compression disabled.

sunnychan · 14th November 2013, 03:39

Quote:

Originally Posted by ExSport

I already reported similar problem. If you have ts/m2ts/mp4/mkv/mpg etc. with different extension, tsMuxeR is unable to import whole file or some parts.
Try to rename .ts to .m2ts if it helps. It is a bug already from v1.x.x what I remember...

Test with renaming to .m2ts extension but it stays the same. It cannot recognize the track and no subtitle has been added after ts remuxing.

Yes, v1.x.x clearly does not work so I want a fix now when Physic is back and develops the new beta.

This format has been out for quite sometimes but some applications like xbmc still outdated and cannot recognize this format.

r0lZ · 14th November 2013, 07:51

Quote:

Originally Posted by physic

I am adding reference to offset metadata for subtitles track.

I need a way to extract the Z depth of each individual subtitles of a subtitle track to convert the subs to Side by Side or Top/Bottom.

I can't find any useful info on how that information is stored in a BD3D, and how to retrieve it. From the quote above, I guess I need to read the offset metadata. Where is that metadata stored, and what is its format?

Any pointer will be much appreciated.

DMD · 14th November 2013, 11:13

Good day

Wonder if it is possible to implement compatibility with the VOB files and mpg, as in the stable version 1.10.06. This version allows you to generate a single file mpg from DVD (VOB files) and allows you to do muxing/demuxing from mpeg file.

In the latest version this is not possible.

Sincerely thank you

trevorjharris · 14th November 2013, 11:33

I have mutiplexed 3d mvc video files produced with Vegas Pro. I have also add an ac3 and srt file. When I play this in PowerDVD 11 it alows me to select the sbutitle but it does not appear on the screen. The 3D video plays fine. I also tried building a blu-ray iso and that had the same problem. I am using release 2.1.8. Please can anyone help.

KoolKiwi · 14th November 2013, 11:37

Quote:

Originally Posted by DMD

I think you will find the "tsMuxeR not found" dialog is indicating that the tsMuxeR.exe command line cannot be found. You should have both tsMuxerGUI.exe and tsMuxeR.exe in the same folder. Have you possibly run the tsMuxerGUI directly from inside the .zip archive?

DMD · 14th November 2013, 13:30

Quote:

Originally Posted by KoolKiwi

I think you will find the "tsMuxeR not found" dialog is indicating that the tsMuxeR.exe command line cannot be found. You should have both tsMuxerGUI.exe and tsMuxeR.exe in the same folder. Have you possibly run the tsMuxerGUI directly from inside the .zip archive?

THANK YOU!

and I apologize for my ignorance

physic · 15th November 2013, 02:18

I am going to release next update 2.2.0 at Sunday. It will contain next improvments:

- Add support for DTS-HD elementary stream with extra DTSHD headers
- Add support for mkv with 'Header Stripping' compression
- Add 3D MKV support (combined AVC+MVC inside MKV)
- Add PCM inside MKV support
- Add PCM inside VOB support
- Allow m2ts splitting for Bluray muxing
- Several minor bug fixes

HWK · 15th November 2013, 02:27

Quote:

Originally Posted by physic

I am going to release next update 2.2.0 at Sunday. It will contain next improvments:

- Add support for DTS-HD elementary stream with extra DTSHD headers
- Add support for mkv with 'Header Stripping' compression
- Add 3D MKV support (combined AVC+MVC inside MKV)
- Add PCM inside MKV support
- Add PCM inside VOB support
- Allow m2ts splitting for Bluray muxing
- Several minor bug fixes

Look promising and definitely looking forward to it. Thank you for everything you have done for community.

Quote:

- Allow m2ts splitting for Bluray muxing

Is this for seamless branching disc.

bensam56 · 15th November 2013, 08:09

Quote:

Originally Posted by physic

I am going to release next update 2.2.0 at Sunday. It will contain next improvments:

- Add support for DTS-HD elementary stream with extra DTSHD headers
- Add support for mkv with 'Header Stripping' compression
- Add 3D MKV support (combined AVC+MVC inside MKV)
- Add PCM inside MKV support
- Add PCM inside VOB support
- Allow m2ts splitting for Bluray muxing
- Several minor bug fixes

Thanks for adding the splitting option

SeeMoreDigital · 15th November 2013, 10:53

Quote:

Originally Posted by physic

I am going to release next update 2.2.0 at Sunday. It will contain next improvments:

- Add support for DTS-HD elementary stream with extra DTSHD headers
- Add support for mkv with 'Header Stripping' compression
- Add 3D MKV support (combined AVC+MVC inside MKV)
- Add PCM inside MKV support
- Add PCM inside VOB support
- Allow m2ts splitting for Bluray muxing
- Several minor bug fixes

Very nice indeed

colinhunt · 15th November 2013, 11:11

Quote:

Originally Posted by physic

I am going to release next update 2.2.0 at Sunday. It will contain next improvments:

- Add support for DTS-HD elementary stream with extra DTSHD headers
- Add support for mkv with 'Header Stripping' compression
- Add 3D MKV support (combined AVC+MVC inside MKV)
- Add PCM inside MKV support
- Add PCM inside VOB support
- Allow m2ts splitting for Bluray muxing
- Several minor bug fixes

Physic, thank you very much for all the time and effort you're putting in.

trevorjharris · 15th November 2013, 13:21

Quote:

Originally Posted by trevorjharris

I have mutiplexed 3d mvc video files produced with Vegas Pro. I have also add an ac3 and srt file. When I play this in PowerDVD 11 it alows me to select the sbutitle but it does not appear on the screen. The 3D video plays fine. I also tried building a blu-ray iso and that had the same problem. I am using release 2.1.8. Please can anyone help.

Still cannot see subtitles. I also demultiplexed the sup file and checked it with supread. If I remultipled the sup file it had
a 3D offest option dropdown with one option of "zerro". The odd thing is that powerdvd does recognise that there is a subtitle track as it alows me to select it on.

zeropc · 16th November 2013, 14:38

please add support for mac os 10.7.5, as the current build crashes on opening.

thanks

vj950 · 16th November 2013, 18:32

Physic and all the experts here: Thank you very much for an awesome software and your advices.

I wanted to know how to keep the IGS menu intact in TsMuxer for 3D mpls. I own many 2D and 3D blurays which have IGS (or HDMV) menus. These have their own m2ts files. When I open these mpls files, tsMuxer ignores those m2ts files (regardless of 2D or 3D)

However, for 2D mpls, once TsMuxer does its job (output as bluray), I can edit the mpls files in BDEdit and add those tracks without any issues. I tried to do this for 3D mpls, but 3D mpls also have "Extension Data" as seen in BDEdit, which I can not edit and therefore the player crashes.

My intention is to keep the menus and remove unnecessary audio and subtitles.

HWK · 16th November 2013, 19:27

Quote:

Originally Posted by vj950

Physic and all the experts here: Thank you very much for an awesome software and your advices.

I wanted to know how to keep the IGS menu intact in TsMuxer for 3D mpls. I own many 2D and 3D blurays which have IGS (or HDMV) menus. These have their own m2ts files. When I open these mpls files, tsMuxer ignores those m2ts files (regardless of 2D or 3D)

However, for 2D mpls, once TsMuxer does its job (output as bluray), I can edit the mpls files in BDEdit and add those tracks without any issues. I tried to do this for 3D mpls, but 3D mpls also have "Extension Data" as seen in BDEdit, which I can not edit and therefore the player crashes.

My intention is to keep the menus and remove unnecessary audio and subtitles.

Most probably you need to provide sample for file which cause crash in order for author to see why program crashes when opening file.

sl1pkn07 · 16th November 2013, 19:34

hi

any plans to include 64bits builds?

greetings

14th November 2013, 11:33	#688 \| Link
trevorjharris Registered User Join Date: Jan 2007 Posts: 43	I have mutiplexed 3d mvc video files produced with Vegas Pro. I have also add an ac3 and srt file. When I play this in PowerDVD 11 it alows me to select the sbutitle but it does not appear on the screen. The 3D video plays fine. I also tried building a blu-ray iso and that had the same problem. I am using release 2.1.8. Please can anyone help. Last edited by trevorjharris; 14th November 2013 at 19:28.

16th November 2013, 18:32	#698 \| Link
vj950 Registered User Join Date: Oct 2012 Posts: 2	3D IGS (HDMV) menus? Physic and all the experts here: Thank you very much for an awesome software and your advices. I wanted to know how to keep the IGS menu intact in TsMuxer for 3D mpls. I own many 2D and 3D blurays which have IGS (or HDMV) menus. These have their own m2ts files. When I open these mpls files, tsMuxer ignores those m2ts files (regardless of 2D or 3D) However, for 2D mpls, once TsMuxer does its job (output as bluray), I can edit the mpls files in BDEdit and add those tracks without any issues. I tried to do this for 3D mpls, but 3D mpls also have "Extension Data" as seen in BDEdit, which I can not edit and therefore the player crashes. My intention is to keep the menus and remove unnecessary audio and subtitles.

13th November 2013, 22:21	#682 \| Link
rik1138 Registered User Join Date: Mar 2008 Location: LA Posts: 620	Physic, this is awesome... I had no idea you were even working on this and came here looking for an easier to way to make a simple straight-play 3D disc... Works great with video files created with Rovi's TotalCode software too. Two tiny requests? 1- Add an option to remove the replay at the end of the video (so the discs just stops instead of looping) (Not sure if there's a way to do this already, but didn't see it) 2- When doing a Blu-ray ISO, maybe an option to point to a pre-created folder containing the META info? I can create the content (the DL folder and files), just need a way to add it into the ISO... Obviously frivolous stuff for when you have a chance, not sure if they were mentioned before as I didn't read the whole thread... Just thought I'd throw it out there. Rik

14th November 2013, 11:13	#687 \| Link
DMD Registered User Join Date: Jan 2006 Location: Italy Posts: 260	Good day Wonder if it is possible to implement compatibility with the VOB files and mpg, as in the stable version 1.10.06. This version allows you to generate a single file mpg from DVD (VOB files) and allows you to do muxing/demuxing from mpeg file. In the latest version this is not possible. Sincerely thank you

15th November 2013, 02:18	#691 \| Link
physic Registered User Join Date: Aug 2013 Posts: 173	I am going to release next update 2.2.0 at Sunday. It will contain next improvments: - Add support for DTS-HD elementary stream with extra DTSHD headers - Add support for mkv with 'Header Stripping' compression - Add 3D MKV support (combined AVC+MVC inside MKV) - Add PCM inside MKV support - Add PCM inside VOB support - Allow m2ts splitting for Bluray muxing - Several minor bug fixes

16th November 2013, 14:38	#697 \| Link
zeropc Registered User Join Date: Mar 2007 Posts: 114	please add support for mac os 10.7.5, as the current build crashes on opening. thanks

16th November 2013, 19:34	#700 \| Link
sl1pkn07 Pajas Mentales... Join Date: Dec 2004 Location: Spanishtán Posts: 496	hi any plans to include 64bits builds? greetings