BD Rebuilder Beta - Bug Reports Only

[donnafmcu]

Originally Posted by jdobbs

@donnafmcu

Are you overclocked? X264 is failing 27 minutes into the encode. That usually means your processor is overheating and/or failing at that point. X264 is the ultimate test of stability for an overclocked system -- if that's the case, back it down some and try again. If you're not overclocked -- check your heatsink for dust buildup. Even a water-cooled system needs an occasional cleaning.

Thank you very much for your quick response, jdobbs.

I'll check overclocked my motherboard Configuration Setup.

Then I carried out a thorough cleaning of the cooling system and will return to testing.

Then I put in contact again with you to report my results.

Greeting

[sieve]

Originally Posted by jdobbs

Are you set to full backup? If it's movie-only, it will just choose one of the imported titles.

Yes, that was it.
Solved.
Thanks!

[donnafmcu]

Originally Posted by jdobbs

@donnafmcu

Are you overclocked? X264 is failing 27 minutes into the encode. That usually means your processor is overheating and/or failing at that point. X264 is the ultimate test of stability for an overclocked system -- if that's the case, back it down some and try again. If you're not overclocked -- check your heatsink for dust buildup. Even a water-cooled system needs an occasional cleaning.

Hi
I want to thank your help that you have given to me.

I opened the box, or my desktop computer Cabinet. Then I perform a thorough cleaning of the fans, cooler you also, I also clean the dirt and dust on the heatsink the micro processor cooling grille.

After cleaning deep, BD_Rebuilder, (BD-RBV05005), do not cause any error in the encoder x264-64.exe, and carry out all works and re-encodings without any problem, and none mistake up to 100%

Here I leave you, the registration of the works of BD-RBV05005, carried out without any errors:

[03/30/15] BD Rebuilder v0.50.05
[00:39:08] Source:  INTERESTELAR_(INTERSTELLAR)_-_2014_-_BD50_LATINO
  - Input BD size: 42,78 GB
  - Approximate total content: [02:57:52.745]
  - Target BD size: 23,24 GB
  - Windows Version: 6.1 [7601]
  - Quality: Highest (Very Slow), ABR
  - Decoding/Frame serving: X264/LAVF
  - Audio Settings: AC3=1 DTS=1 HD=0 Kbs=448
[00:39:08] PHASE ONE, Encoding
 - [00:39:08] Processing: VID_00134 (1 of 2)
 - [00:39:08] Extracting A/V streams [VID_00134]
 - [00:39:17] Reencoding video [VID_00134]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23,976fps, 8.159 frames
   - Bitrate: 2.107 Kbs
 - [00:39:17] Reencoding: VID_00134, Pass 1 of 1
 - [00:40:25] Video Encode complete
 - [00:40:25] Processing audio tracks
 - [00:40:25] Multiplexing M2TS
 - [00:40:29] Processing: VID_00136 (2 of 2)
 - [00:40:29] Extracting A/V streams [VID_00136]
 - [01:02:41] Reencoding video [VID_00136]
   - Source Video: MPEG-4 (AVC), 1920x1080
   - Rate/Length: 23,976fps, 243.211 frames
   - Bitrate: 16.851 Kbs
 - [01:02:41] Reencoding: VID_00136, Pass 1 of 1
 - [04:58:50] Video Encode complete
 - [04:58:50] Processing audio tracks
   - Track 4352 (eng): Reencoding audio to AC3...
   - Track 4355 (spa): Reencoding audio to AC3...
 - [05:03:04] Multiplexing M2TS
[05:13:34]PHASE ONE complete
[05:13:34]PHASE TWO - Rebuild Started
 - [05:13:34] Rebuilding BD file Structure
[05:13:43] - Encode and Rebuild complete
 - WORKFILES folder removed.
[05:13:43] JOB: INTERESTELAR_(INTERSTELLAR)_-_2014_-_BD50_LATINO finished.

[Status]
LABEL=INTERESTELAR_(INTERSTELLAR)_-_2014_-_BD50_LATINO
VERSION=v0.50.05
SOURCE_SIZE=45930476257
SOURCE_VIDEO_SIZE=45689640960
TARGET_SIZE=24956108800
REDUCTION=.540938229841586
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=eng;spa;
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=all
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=-1
INSTANCES=1
DGDECNV=0
DGDECIM=0
FRIMSOURCE=0
FFMS2=0
SSIF_MODE=0
QUICK=0
ENCODE_STEP=0
COMPLETED=2
REBUILD_COMPLETE=1
[00134]
AUDIO=
PGS=
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=96408798
RATE=2107
SPLITS=1
NSTART=27000000
NEND=42313423
NSIZE=96976896
FLINK=0
MLINK=0
[00136]
AUDIO=10010
PGS=111111111
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=24618864705
RATE=16851
SPLITS=1
NSTART=27000000
NEND=483476642
NSIZE=23480082432
FLINK=0
MLINK=0

Thank you very much for helping me to solve this problem, jdobbs.

Greeting

[Ch3vr0n]

You also could start by using the original disc, there's not a chance in hell that that is an original disc. There's no retail disc that uses a disc volume name like that.

Verstuurd vanaf mijn Nexus 7 met Tapatalk

[RobertM]

Originally Posted by Ch3vr0n

there's not a chance in hell that that is an original disc.

Agreed.

Donna, let me ask you why you think JDobbs should help you resolve this issue? The source is clearly a rip, downloaded from somewhere on the web. It may or may not be BD compliant,... how would he know? He could well end up chasing problems that are caused not by BD-RB, but solely because of something someone else did to that file.

Furthermore, helping someone use illegally sourced movie files would put this Doom9 site in legal jeopardy. I doubt you'll receive any further assistance.

[donnafmcu]

Originally Posted by RobertM

Agreed.

Donna, let me ask you why you think JDobbs should help you resolve this issue? The source is clearly a rip, downloaded from somewhere on the web. It may or may not be BD compliant,... how would he know? He could well end up chasing problems that are caused not by BD-RB, but solely because of something someone else did to that file.

Furthermore, helping someone use illegally sourced movie files would put this Doom9 site in legal jeopardy. I doubt you'll receive any further assistance.

This all right, if you claim that I am putting at risk this page and the Doom9 Forum, I have another alternative that proceed immediately with the task to take down completely my user, and my profile, to leave entirely to Doom9.

From my point of view, you would have to show and unhide the evidence of the crime that you accused me. This very bad to be the accuser, judge, and executioner of accusing a user without presenting evidence supporting alleged and hypothetical crime.

That you slight his work of accuser, judge, and executioner...

[duftopia]

I am having trouble with bd-rebuilder since 2/2015, I can never answer the "random Questions" properly but that should not make it impossible for me to ask questions, I did DOnate maybe more then mosy, and I don't intend to waist space on paragraphs like this one ONCE I can ask like a normal person.

So I will try over and over till I get the random question right, then edit this post.

[duftopia]

Originally Posted by duftopia

I am having trouble with bd-rebuilder since 2/2015, I can never answer the "random Questions" properly but that should not make it impossible for me to ask questions, I did DOnate maybe more then mosy, and I don't intend to waist space on paragraphs like this one ONCE I can ask like a normal person.

So I will try over and over till I get the random question right, then edit this post.

I am having trouble with bd-rebuilder since 2/2015, I can never answer the "random Questions" properly but that should not make it impossible for me to ask questions, I did DOnate maybe more then mosy, and I don't intend to waist space on paragraphs like this one ONCE I can ask like a normal person.

So I will try over and over till I get the random question right, then edit this post.

I cannot convert ANY Blu-ray to DVD using BDrebuilders "Movie Only" feature. I've tried everything reloaded everything tried:

force_encode=1
for_encodeing=1
Keep_hd_dts_hd xxl=0
Hd_aud.0xx=0
Override_avchd_limit=1

I've re-installed EVERYTHING 2 times, and tried all the internal settings and still get Video w/o audio for "DTS-HD XLL" audio files in the movies.

Here are my most recent logs and Support prints- - - - - - - - ->

<INSPECT>

- Windows Version: 6.1 [7601]
- AVISYNTH Version: 2.5.8.0, Ok
- HAALI Splitter: Ok
- FFDSHOW: 3326, Ok
- WIN7 preferred AVC CODEC: Ok
- WIN7 preferred VC-1 CODEC: Ok
- WIN7 preferred MPEG2 CODEC: Ok
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- BD Rebuilder v0.38.0.3, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok


Tried disable vc-1 also

<bdrebuilder log file>

[03/30/15] BD Rebuilder v0.50.05
[21:14:20] Source: THE_SIGNAL_NA_00800
- Input BD size: 26.01 GB
- Approximate total content: [01:37:11.784]
- Windows Version: 6.1 [7601]
- MOVIE-ONLY/ALTERNATE OUTPUT mode enabled
- Mode: DVD-9, 720x480/576, AC3 Audio
- Decoding/Frame serving: X264/LAVF
- Audio Settings: AC3=0 DTS=0 HD=0 Kbs=640
[21:14:21] PHASE ONE, Encoding
- [21:14:21] Processing: VID_00800 (1 of 1)
- [21:14:21] Extracting A/V streams [VID_00800]
- [21:22:54] Reencoding video [VID_00800]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 139,823 frames
- Bitrate: 8,328 Kbs
- [21:22:55] Reencoding: VID_00800
- [00:36:26] Video Encode complete
- [00:36:26] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- Track 4353 (eng): Keeping original audio
[00:37:31]PHASE ONE complete
[00:37:31]PHASE TWO - Rebuild Started
- [00:37:31] Building ALTERNATE OUTPUT Structure
- [00:37:32] Converting 3 subtitles to DVD format.
- [00:40:06] Starting MPLEX.
- [00:42:19] Multiplexing 3 subtitles into stream.
- [00:52:08] Building DVD File Structure.
[00:56:00] - Encode and Rebuild complete
[00:56:00] JOB: THE_SIGNAL_NA finished.

<inf file>

[Status]
LABEL=THE_SIGNAL_NA
VERSION=v0.50.05
SOURCE_SIZE=27924590592
SOURCE_VIDEO_SIZE=27924590592
TARGET_SIZE=49666850816
REDUCTION=1.77860623067573
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=all
KEEP_HD_AUDIO=0
SUBS_TO_KEEP=all
BACKUP_MODE=1
MOVIEONLY_TYPE=2
USE_LAVF=-1
INSTANCES=1
DGDECNV=0
DGDECIM=0
FRIMSOURCE=0
FFMS2=0
SSIF_MODE=0
QUICK=0
ENCODE_STEP=0
COMPLETED=1
REBUILD_COMPLETE=1
[00800]
AUDIO=11
PGS=111
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=49666850816
NSIZE=0
FLINK=0
MLINK=0

I am TOTALLY buggered out.... This began happening right after the CLONEBD install this year and Clonedvdmobile another Slysoft product also took a nosedive. I noticed reviewing the the DVD's (using mediainfo) created that the vts_01_1.vob had 1 video and up to 3 audio streams whereas the rest of the vts_02 and on were missing the audio streams.

In several cases with multiple audio languages the foreign languages came through or the commentary came through when the primary failed.

I saw similar cases ranging from 2008 posted on doom9 and elsewhere but ALL the solution presented failed, what is the right combinations I may need in ffdshow, bdrebuilder (and special flags as stated above) or tricks to get this to work with reasonable aggravation using BDrebuilder ?

I really hate to babble on or fill this forum with logs but I've tried for over 2 months to fix it and the combinations of elements are so excessive that it would be another year to get it JUST right.

Any clues?
DufAvisynth

[Sharc]

@duftopia:

- BD Rebuilder v0.38.0.3, Ok

This version is way outdated. Current version is v0.50.05

Secondly: Has your source "THE_SIGNAL_NA_00800" been preprocessed by CLONEBD or whatever?

[jdobbs]

@duftopia

I think you are running an old version of INSPECT. That program is no longer a part of BD-RB. You need to execute INSPECT from the HELP menu. Also, you provided the INF file -- but what I'd really need to see is the contents of BDREBUILDER.INI.

for_encodeing=1
Keep_hd_dts_hd xxl=0
Hd_aud.0xx=0
Override_avchd_limit=1

I have no idea what these settings are or where you got them... I'm guessing that some of what you intended are actually OVERRIDE_AVCHD_AUDIO_LIMIT, KEEP_HD_AUDIO, and FORCE_ENCODING.

whereas the rest of the vts_02 and on were missing the audio streams

This is confusing to me... are you talking about CLONEBD? There is never a "VTS_02" created by BD-RB -- as it only does movie-only backups to DVD.

[Ch3vr0n]

@donnafmcu

We don't need to provide any more proof than what you already provided yourself with the disc volume label in that log. No retail disc uses a volume label like that! Not even 1. The chances your source is an original disc is non-existent

Verstuurd vanaf mijn Nexus 7 met Tapatalk

[duftopia]

Inspect (from help scree) Log - - - - - - - ->

Checking System Settings
  - BD-Rebuilder v0.50.05
  - Windows Version: 6.1 [7601]
  - Working Path Free Space: 42.11GB
  - AVISYNTH Version: 2.5.8.0, Ok
  - HAALI Splitter: 1.9.42.1, Ok
  - FFDSHOW: 3326, Ok
  - WIN7 preferred AVC CODEC:  Ok
  - WIN7 preferred VC-1 CODEC:  Ok
  - WIN7 preferred MPEG2 CODEC:  Ok
  - FFDSHOW VC-1 set to "wmv9", Ok
  - FFDSHOW MPEG2 set to "libavcodec":  Ok
  - FFDSHOW AVC set to "libavcodec":  Ok
  - AnyDVD settings check: Ok.
  - X264:  Ok
  - AFTEN:  Ok
  - FAAC:  Ok
  - MP4BOX:  Ok
  - WAVI:  Ok
  - TSMUXER:  Ok
  - FRIMEncode:  Ok
  - FRIMDecode:  Ok
[04/01/15] Systems Settings Check complete

BDrebuilder.ini (currect) - - - - - - - - - - - >

[Options]
VERSION=0.50.0.5
ENCODER=0
MODE=3
ENCODE_QUALITY=0
ONEPASS_ENCODING=2
AUTO_QUALITY=0
MOVIEONLY_TYPE=2
ALTCRF=23
ALT_TARGET=1024
ALTMETHOD=0
ALTAUTOCROP=0
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=0
AC3_192=0
KEEP_HD_AUDIO=0
AUDIO_DRC=0
DECODER=0
AVCHD=0
REMOVE_WORKFILES=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=1
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=23500
TARGET_SIZE=47366
AUTO_BURN=0
PRIORITY_CLASS=0
DTSX_ENABLE=0
[OVERRIDE_AVCHD_AUDIO=1]
KEEP_HD_DTS_HD XXL=1
[Paths]
WORKING_PATH=U:\HOLD\
SOURCE_PATH=M:\BLU-RAYS\THE_SIGNAL_NA\

I am using the latest bd-rebuilder v0.50.05

This is a RIP using Anydvd HD version 7.5.9.0

I've further tried converting the dts audio file to ac3 (using an external program called avatar) and inserting it into the workfile directory as another recommended solution but that also failed

BD-Rebuilder creats a standard type of dvd structure that includes all the .vob files, ifo etc...

* I am NOT CREATEING a BD5, BD9 blu0ray structured directory - I am creating a movie only DVD structure.

Thanks
Duf

[Sharc]

@duftopia
Does this problem exist for this source only, or do you get the same problem with other discs too?

Edit1:
I don't have your disc, but I just did a Blu-ray to DVD backup, 2 audio and 3 sups, and all worked fine. No problem here.

In the DVD output folder you should see in the Video_ts folder:
Video_ts.bup
Video_ts.ifo
Vts_01_0.ifo
Vts_01_0.bup
Vts_01_1.vob
Vts_01_2.vob
Vts_01_3.vob
Vts_01_4.vob

but no Vts_02_xxx because you have only 1 title (1 movie).

Perhaps something is strange with your source file.
I would suggest to delete the existing rebuilder.ini and let BD_RB generate a new rebuilder.ini which you do not modify. I am not sure about the validity of the options:
DTSX_ENABLE=0
[OVERRIDE_AVCHD_AUDIO=1]
KEEP_HD_DTS_HD XXL=1

Edit2:
You could play the Vts_01_x.vob with a SW player like MPC-HC or VLC. Do you get the audio?
Or when you inspect the .vob with MediaInfo, does the audio stream show up or is it missing?
Is the Disc Cinavia protected?

[jdobbs]

@duftopia

What are you using to burn the DVD? I see nothing that would cause an issue, and it looks like the job is completing without error. As Sharc mentioned, you have a few nonsensical settings -- but they should have no effect. One thing I notice is that you have MODE=3 in your INI. That means that at least at the time you printed the INI you aren't in movie-only mode (although your log shows you were at the time of the apparently successful encode).

Using your log and INI file as a reference, you should look for a folder called "U:\HOLD\THE_SIGNAL_NA_DVD". That is what should be burned to disc. That folder should also contain a VIDEO_TS folder (which is indicative of a DVD structure). You can simply select it with ImgBurn -- which will check itself for correct DVD settings (they are different than BD) and burn it appropriately. Make sure you don't override it's suggestion and try to burn in the wrong format.

[jetli]

i have 2 issues relating to quick play backup.
1) how can i get quick play backup to eliminate the extras that are less than 35 min in length?
2) how can i set the quick play menu to NOT say feature presentation ... and SAY S1 E1 etc, my input is being ignored for the episode titles,
the main title i can change and it take that.
and it always seems to find 3 titles, 2 that are real episodes and 1 that is abunch of extras combined, like deleted scenes that i don't want.

thanks for your help.

[jdobbs]

Originally Posted by jetli

i have 2 issues relating to quick play backup.
1) how can i get quick play backup to eliminate the extras that are less than 35 min in length?
2) how can i set the quick play menu to NOT say feature presentation ... and SAY S1 E1 etc, my input is being ignored for the episode titles,
the main title i can change and it take that.
and it always seems to find 3 titles, 2 that are real episodes and 1 that is abunch of extras combined, like deleted scenes that i don't want.

thanks for your help.

1) You can set the threshold (in minutes) via the menu in "SETTINGS/Import/Quick-Play Settings". The default is 15 minutes.

2) You can make the menu say anything you want: "Click MODE/Edit Quick-Play Menu", click on the title you want to edit (in the list), and edit the title name in the provided area. It's a lot easier if your source has been copied to a hard drive. There has been at least one report of problems when trying to edit directly from a disc -- although I haven't been able to repeat it (it works fine for me).

[jetli]

thanks for your response.
1) You can set the threshold (in minutes) via the menu ... worked fine.

2) i cannot make it says what i want ... it keeps defaulting to

01. Feature Presentation: [00:59:33.611]
02. Feature Presentation: [00:50:55.510]

despite the fact i want it to be S1 E1, etc.
it doesn't take.
it is an decrypted, mounted, .iso file, not that it should make a difference,
but i won't say what i put in the above fields, and keeps defaulting to

01. Feature Presentation: [00:59:33.611]
02. Feature Presentation: [00:50:55.510]

how can i fix???
thanks

[jdobbs]

1. Mount the ISO.
2. Copy the contents to a folder on your hard drive.
3. Use the new folder as input to BD Rebuilder.

But.... as I mentioned, I just mounted an ISO on my computer and had no issues editing the menu.

[jetli]

i copied files out of .iso ... it works!
the menu used to keep reverting to feature presentation every time you change exit and enter, and the results were always feature presentation.
now the menu stay at what i set it to and the results are good.

thanks for your help.

next question ...
if i have, 2 features out of 15, that i want, and those 2 are just bigger than a bd25 with multi languages and, let's say i want just english and
i eliminate the rest as usual, and let's say it set it to bd25 output THEN ...
how does your program know if i need compression and how much to give to each of the titles and
not over compress knowing that i only want 2 titles not 15, and eliminating alot of unneeded languages?

thanks

[duftopia]

I erased the bd rebuilder.ini file and started FRESH, still got the same results:

Yes you are correct about the vts files they are all 01-x where x goes up 1,2,3,4...

Mediainfo shows vts-01-1.vob HAS a video stream and 1 or more audio streams - (Ac-3) the rest of the .vob files are missing all audio streams

When I play ANY of the .vobs 1-5 in media player, vlc and powerplayer 9 they all lose the audio (dts-hd Xll sound file?).

ALL bds since installation of CloneBD earlier this year have gone awry with the same failure to convert to DVD issue in BD-Rebuilder.

I am NOT trying to burn the image yet since I have already created my share of cup holder dvds without audio.

The video_ts folders and structures are created exactly as stated, I will look into the mode flag, but it seems (mode=3 is movie only mode? also custom and target size #'s look odd but the folders mention ARE created correctly