madVR - high quality video renderer (GPU assisted)

[Q-the-STORM]

Originally Posted by mclingo

worse case scenario you could rip to SBS and not use MVC 3D, not ideal as you'll get resolution loss but better than nothing, that is if you are a gamer and need to be on latest drivers, if not just stay on an old version, obviously.

No need to reencode, you can play MCV 3D in SBS/OU.

And if you have a 2160p TV, there shouldn't be any resolution loss either.

[huhn]

i haven't seen a dingle UHD device that support SBS or TB when set to UHD.

it's an obvious thing to support but 3D is that dead.

[jorsan]

Originally Posted by SamuriHL

Do an advanced install and you can unselect it. I do the same thing...driver only.

Thanks samuriHL, will do that.

[katodevin]

Originally Posted by VenomousNinja

New Nvidia Drivers. Changes and Fixed Issues in Version 430.39:
Fixed Issues in this Release
 [madVR][HDR]: MadVR is not rendering videos in HDR mode using MPC player.
[200505657]
 [Surround][G-SYNC][Pascal GPU]: G-SYNC does not engage when using Surround
resolution. [200505986]
 Random desktop flicker occurs on some multi-display PCs [2453059]
 Memory leaks occur when launching games. [2551904]

Can anyone verify if this fixes the Turing bug with stuttery playback?

[hotripper]

Originally Posted by huhn

@hotripper
just stick to power saving. it not changing the power that's send over HDMI and it does other more complicated things... and it will not lower your general performance it just trys to waste less power.
and you should leave pre rendered frames to application control madVR by default uses 3 or 8 by default depending on the rendering surface and we still can't see your image.

Cant do that, Power saver eventually lags very bad. And using 1 shader max results in having to set -300ms delay.

But I think I have found the culprit. So when using madvr with mpc-hc I set LAV to D3D11 native. But I noticed when I use EVR LAV settings are different.

So does anyone know if Madvr and EVR carry their own unique settings for LAV?

And as a side note why do I not receive email notifications from my subscribed threads on this forum? I set all to "instant"

[huhn]

EVR doesn't support d3d11 native so it will use a fall back.

and you are using more shader then you believe far more.
AV shouldn't go async audio is the master clock so madVR has to adapt.

[toki]

Originally Posted by katodevin

Can anyone verify if this fixes the Turing bug with stuttery playback?

It's fixed it over here. I'm on a 1660ti and am pretty pleased with this new driver so far.

[hotripper]

Originally Posted by huhn

EVR doesn't support d3d11 native so it will use a fall back.

and you are using more shader then you believe far more.
AV shouldn't go async audio is the master clock so madVR has to adapt.

I just dont know what is wrong with the 2070, tried two different cards same result. Put the 970 back in and no stuttering no matter which settings I use.

I change something in settings and it works, then doesnt. Then it will just work on its own. Totally random.

Frustrated.

[x7007]

They fixed the Madvr HDR playing, now it doesn't switching like crazy in Potplayer .

What should we do with the 3D situation ? I am using PowerDVD 3D blu rays, what am I'm supposed to do now ?

[FDisk80]

Originally Posted by x7007

What should we do with the 3D situation ? I am using PowerDVD 3D blu rays, what am I'm supposed to do now ?

Yea, in the same boat. Maybe someone can look in to the "NvStWiz.exe" compatibility issue with future drivers. The installation can be extracted from previous driver but does a version check and throws an error at you.

You can find the latest 3DVision drivers in this location:
C:\Program Files\NVIDIA Corporation\Installer2\Display.3DVision.{......................................}

Inside that folder there is "3DVision.exe" file that you can right click and extract with WinRAR.

After extracting you will find the all the 3DVision installation files.

[3D Vision Experience] <DIR>  09/04/2019 14:57 -a-
[amd64] <DIR>  09/04/2019 14:46 -a-
layout.bin 491 09/04/2019 14:55 -a-
data1.cab 6,223,040 09/04/2019 14:55 -a-
data2.cab 512 09/04/2019 14:55 -a-
_setup.dll 335,672 09/04/2019 14:57 -a-
ISSetup.dll 551,920 09/04/2019 14:57 -a-
npnv3dv.dll 808,488 09/04/2019 14:55 -a-
npnv3dvstreaming.dll 293,632 09/04/2019 14:56 -a-
Nv3DVisionIePlugin.dll 274,176 09/04/2019 14:56 -a-
Nv3DVisionIePlugin64.dll 326,400 09/04/2019 14:56 -a-
Nv3DVStreaming.dll 141,808 09/04/2019 14:56 -a-
Nv3DVStreaming64.dll 171,776 09/04/2019 14:56 -a-
Nv3DVStreamingIePlugin.dll 198,920 09/04/2019 14:56 -a-
Nv3DVStreamingIePlugin64.dll 169,784 09/04/2019 14:56 -a-
nvImage.dll 1,028,680 09/04/2019 14:56 -a-
nvImage64.dll 1,333,832 09/04/2019 14:56 -a-
NvSCPAPI.dll 649,288 09/04/2019 14:56 -a-
NvSCPAPI64.dll 738,888 09/04/2019 14:56 -a-
nvstapisvr.dll 378,952 09/04/2019 14:56 -a-
nvstapisvr64.dll 413,768 09/04/2019 14:56 -a-
nvStereoApiI.dll 329,800 09/04/2019 14:56 -a-
nvStereoApiI64.dll 380,728 09/04/2019 14:56 -a-
NvStRes.dll 3,745,592 09/04/2019 14:56 -a-
NvStRes64.dll 3,636,024 09/04/2019 14:56 -a-
NvStWizRes.dll 7,380,792 09/04/2019 14:56 -a-
nvwl.dll 117,048 09/04/2019 14:56 -a-
nvwl64.dll 130,872 09/04/2019 14:56 -a-
NvStereoUtilityOGL.exe 1,146,440 09/04/2019 14:56 -a-
nvStInst.exe 407,112 09/04/2019 14:56 -a-
nvstlink.exe 2,373,704 09/04/2019 14:56 -a-
nvStreaming.exe 141,384 09/04/2019 14:56 -a-
nvStReg.exe 819,272 09/04/2019 14:56 -a-
NvStTest.exe 2,754,360 09/04/2019 14:56 -a-
NvStView.exe 4,403,000 09/04/2019 14:56 -a-
NvStWiz.exe 442,680 09/04/2019 14:56 -a-
setup.exe 388,464 09/04/2019 14:57 -a-
data1.hdr 28,868 09/04/2019 14:55 -a-
NVSTEREO.INF 7,405 22/03/2019 19:35 -a-
nvTimings.ini 107,200 09/04/2019 14:53 -a-
setup.ini 841 09/04/2019 14:55 -a-
setup.inx 263,759 09/04/2019 14:53 -a-
setup.isn 76,009 19/04/2007 05:47 -a-
setup.iss 418 22/03/2019 19:35 -a-
NvStDef.reg 1,755 22/03/2019 19:35 -a-
OGLStReg.reg 10,217 09/04/2019 14:50 -a-
42,122 k in 44 files

You can Install it but as soon as the installation runs "NvStWiz.exe" it will say that it is incompatible.

Edit: Maybe we can use the Windows 10 3D mode API instead of nVidia's one?
https://docs.microsoft.com/en-us/win...tereoscopic-3d

Can madVR or LAV or MPC-BE use that API instead?

.

[madjock]

Originally Posted by x7007

They fixed the Madvr HDR playing, now it doesn't switching like crazy in Potplayer .

What should we do with the 3D situation ? I am using PowerDVD 3D blu rays, what am I'm supposed to do now ?

Start a 3D Thread, this is madVR

[mclingo]

continue the 3D discussion here, this is what I created it for, its a 3D issue but it affects MADVR playback -

https://forum.doom9.org/showthread.php?t=175769

[Q-the-STORM]

Originally Posted by huhn

i haven't seen a dingle UHD device that support SBS or TB when set to UHD.

My E6 supports both in UHD, but I'm really not into 3D so I haven't looked if any others do, I just assumed since it's such a simple feature when the TV already supports 3D. If it's a rare feature, then it's obviously no solution for most people.

[mclingo]

the E6 was the last gen which suopported 3D on the OLED side, samsung gave up on 3D LED a year before that, I have an EF950 OLED which also supports 3D in UHD mode, you only get 2k though but as all 3D is 1080p thats no issue.

I can even get 3D in HDR mode, but obviously there are no 3D / HDR movies anyway but it works...

[katodevin]

Originally Posted by toki

It's fixed it over here. I'm on a 1660ti and am pretty pleased with this new driver so far.

Thanks so much. I'll try throwing my 1660 back into my system. Are you forcing vsync or FSE mode? Assuming you're using MPC or MPCBE?

[toki]

Originally Posted by katodevin

Thanks so much. I'll try throwing my 1660 back into my system. Are you forcing vsync or FSE mode? Assuming you're using MPC or MPCBE?

FSE on MPC, not forcing VSync

[katodevin]

Originally Posted by toki

FSE on MPC, not forcing VSync

Have you tried to see if full screen windowed works again? If not, no worries, I can try myself.

[toki]

Originally Posted by katodevin

Have you tried to see if full-screen windowed works again? If not, no worries, I can try myself.

I'm not pushing my luck right now. I've been tinkering away trying to get the best settings for quality with madVR itself without going overboard on the settings. I'm just so happy it stopped stuttering. The frustration that came along with getting this card and have that going on non-stop with no real fix for it.

[jorsan]

Hi, I have a W10, I5, 8gb and RTX 2070. Under this configuration, a 1080 movie in a 4k TV applayng (under chroma and image upsampling) any NGU upsampling options, it sttuters and I think this is not normal. Can this improved if I overclock my card?, what is the best that I can do with my RTX 2070 card?. Thanks in advance for your input.

[hotripper]

Originally Posted by jorsan

Hi, I have a W10, I5, 8gb and RTX 2070. Under this configuration, I can't run a 1080 movie in a 4k TV using (under chroma and image upsampling) any ofthe NGU upsampling options and I think this is not normal. Can this improved if I overclock my card?, what is the best that I can do with my RTX 2070 card?. Thanks in advance for your input.

What do u mean cant run? It stutters? Or just unwatchable at and no sound? Which i5 do you have?

I dont think OCing the card is gonna help much. I have NGU AA on both of those options and it runs.