RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY - Page 291

26th September 2009, 14:52

Nice program, hadn't used it before

Just a couple of quick questions (too speed workflow a little):

1) Is there a way of turning off the "Grabbing Frame" feature (using AVS scripts, so don't need to edit anything in the frameview - it slows down queing quite a bit with 0.15FPS filter chains!!!)?

2) Is there a way of setting an Audio format as default (and Normalisation values, etc)?

I realise both of these may be an .INI feature, but I was unable to find the corrent syntax

7ek

hoju3508 · 26th September 2009, 17:25

Can RipBot264 convert 29.97fps source to 23.967fps?

EDIT: I found some options to force the output to 23.967 fps. Will try it now.

8ternity · 26th September 2009, 20:44

Quote:

Originally Posted by dragonkeeper

@ 8ternity

Thx for the info.

I loath the Vista OS like I've loathed no other, I hardly ever use my laptop because of it (would have switched to a Linux flavor or even XP if i could have found drivers for nic card.) At least MS admits they dropped the ball on that one. Will be getting Window 7 Ultimate x64 as soon as it's released in states.

Very nice, I was guesstimating that i would be somewhere in the ballpark of 7 - 11 fps, 2fps is totally unacceptable considering that this hardware was purchased to make encoding my Blu-Ray and HD DVD collection possible. At this rate i could switch back to my Athlon X2 @ 2.8GHz and get a 30% speed increase.

I see that you were running Ripbot264 version 1.11.5.

Have you done an encode with the latest version? (It may be me but it seems that some of the applications that RipBot uses are hit or miss with some processors cough, cough, AMD.)
If so did you see any changes in your FPS?

I'm just curious to now if the version change is having an impact. I believe I was running 1.13.1 on my dual core, I'm no exactly sure as it's been about 6-8 months ago.

At the moment i'm preparing to run stress test (memtest86+, Sp2004, prime95) on the system to see if they reveal anything. I built this system about 5 moths ago and it's just been sitting collecting dust I don't remember running stress test at that time which is something i always do with new builds.

BTW: If any one is looking toi build a new HTPC from scratch look at the ASRock boards with Instant Boot. My system boots in under 10 seconds, it's pretty sweet.

Seriously i was using the version 1.11.5 because all other release can't syncronized audio delay perfectly. I was using all latest version of ffdshow, clsid revision, latest avisynth and latest ripbot, and still having trouble. With that version i was able to get conversion done with making a lot of test.

Atak recommand me to change my amd dual core 6400+ 3.20 ghz processor for an quad. i finally reinstall windows and all directx latest revision, make all fresh install and get same trouble.

I really dont find the trouble why audio sync can't syncronized.

It's why i turn back in my log movie conversions to see what version was stable in the past, and make it done with the latest ffdshow and sometimes i get trouble but need to play a lot with delay audio. the trouble i get, i can't find the audio delay from the original mkv and tranfert into ripbot. if i took an original blu-ray, all is ok.

gohamstergo · 26th September 2009, 21:53

somehow my jobs list got cleared when i had 8 jobs in it. I still have the jobs folders with the demuxed audio/video and subtitles. Is there any way to restore it? tried search to no avail :\ i also see the jobs.list and jobs.state files but no idea what to do with them.

EDIT: I see I can add the job's .avs file...is that the proper way to do it?

TheImperial2004 · 27th September 2009, 06:22

Any chance to include MB-Tree and VAQ/AutoVAQ controls soon ?

What an awesome tool ! Arigatou !

Edit : I replaced x264_x86.exe file with an x264.nl build (after renaming off course) , RipBot 264 refused to encode with it ? Can someone shed some light ?

kikker · 27th September 2009, 19:03

Remove the --nal-hrd from your profile. This option is not valid at least for 1259, the current recommended version. You can also find what went wrong in the Ripbot logs. BTW, 1-pass encodes go WAY down in bitrate with this build, and you need to lower the rate factor substantially in order to achieve a comparable quality encode.

gohamstergo · 27th September 2009, 21:22

It seems my jobs queue disappeared because ripbot decided to change the hard drive it uses for temp files. Can there please be an option to select the temp file hard drive? This is the first problem ive encountered with ripbot directly, other than that its been working great. thanks!

Atak_Snajpera · 27th September 2009, 22:29

Ripbot264.ini

Dark Shikari · 27th September 2009, 22:32

Quote:

Originally Posted by kikker

BTW, 1-pass encodes go WAY down in bitrate with this build

No it doesn't. It goes "way up" sometimes and "way down" sometimes. If it always went "way down", I would have adjusted CRF accordingly.

Quote:

Originally Posted by kikker

and you need to lower the rate factor substantially in order to achieve a comparable quality encode.

No you don't.

kikker · 27th September 2009, 22:47

Interesting. I'll have to perform more encodes, but I've experienced relatively large drops in overall file size of encodes since dropping in 1259 in Ripbot with a relative drop in quality at the same crf. The only thing I've had to change was removing the --nal-hrd switch of the default Blu-Ray profile to make it work with the latest Ripbot.

EDIT: I'm now wondering if not cropping has anything to with it, as the encoder sees large areas of black. I'll have to test it with a cropped source.

Dark Shikari · 27th September 2009, 23:51

Quote:

Originally Posted by kikker

Interesting. I'll have to perform more encodes, but I've experienced relatively large drops in overall file size of encodes since dropping in 1259 in Ripbot with a relative drop in quality at the same crf.

If you're referring to the change due to MB-tree (which is already a month+ old now), the Handbrake guys did a lot of tests on DVD sources and in most cases quality dropped marginally (<10%) and bitrate dropped a lot (15-35%).

If you're talking about something other than MB-tree, I have no idea what you're talking about

gohamstergo · 27th September 2009, 23:56

Quote:

Originally Posted by Atak_Snajpera

Ripbot264.ini

well that seems too obvious now....thanks, i feel like a fool :P

QUEENFAN · 28th September 2009, 06:12

Quote:

Originally Posted by hoju3508

Is this a screen capture on the PC?

I've seen this problem on my PC but when I burned the output to the disc it's fine.

Thanks for the hint. But I tried it on the weekend with my HTPC and the same problem there.

Any other advice?

Alex_080 · 28th September 2009, 14:20

Hi friends please help me in this problem with Ripbot264 1.14.4

when i convert a *.avi file with ripbot264 the first step of audio encoding perfectly done but in when the pass 1 start it says job1 complete but nothing done ... is there any problem please tell me

i use windos XP
AviSynth 2.58
K-Lite Codec Pack 5.1

deets · 28th September 2009, 15:42

Quote:

Originally Posted by Alex_080

Hi friends please help me in this problem with Ripbot264 1.14.4

when i convert a *.avi file with ripbot264 the first step of audio encoding perfectly done but in when the pass 1 start it says job1 complete but nothing done ... is there any problem please tell me

i use windos XP
AviSynth 2.58
K-Lite Codec Pack 5.1

remove the codec pack.

just install the basics ripbot needs to work, ffdshow etc

Blackwalker · 28th September 2009, 17:44

hi
i i'd like to updated my computer with a second system, windows 7 64bit rc,
just to try it.
Which ffdshow version'd i use?
i fast checked and i didnt find a 64 bit version.

someone can point me in the right direction?
thx!

DarkZell666 · 28th September 2009, 17:59

Quote:

Originally Posted by Blackwalker

hi
i i'd like to updated my computer with a second system, windows 7 64bit rc,
just to try it.
Which ffdshow version'd i use?
i fast checked and i didnt find a 64 bit version.

someone can point me in the right direction?
thx!

1) http://sourceforge.net/projects/ffdshow-tryout/
2) View all files
3) "SVN builds by clsid" or "SVN builds by XXL"
4) "64-bit builds" or "win64"
5) Click and download

TheImperial2004 · 28th September 2009, 22:35

I am feeling that I am being ignored

kikker · 29th September 2009, 02:43

Quote:

Originally Posted by TheImperial2004

I am feeling that I am being ignored

Did you try what I suggested? It's working for me...

hoju3508 · 29th September 2009, 04:25

On your HTPC, you're still using PowerDVD or Home Media Player correct? I would try playing the disc on a PS3 or stand alone Blu-ray player.

Quote:

Originally Posted by QUEENFAN

Thanks for the hint. But I tried it on the weekend with my HTPC and the same problem there.

Any other advice?

26th September 2009, 17:25	#5802 \| Link
hoju3508 Registered User Join Date: Nov 2007 Location: Austin, TX Posts: 197	Can RipBot264 convert 29.97fps source to 23.967fps? EDIT: I found some options to force the output to 23.967 fps. Will try it now. Last edited by hoju3508; 26th September 2009 at 22:28. Reason: Added EDIT statement.

26th September 2009, 21:53	#5804 \| Link
gohamstergo Registered User Join Date: Jun 2009 Posts: 42	somehow my jobs list got cleared when i had 8 jobs in it. I still have the jobs folders with the demuxed audio/video and subtitles. Is there any way to restore it? tried search to no avail :\ i also see the jobs.list and jobs.state files but no idea what to do with them. EDIT: I see I can add the job's .avs file...is that the proper way to do it? Last edited by gohamstergo; 26th September 2009 at 21:57.

27th September 2009, 06:22	#5805 \| Link
TheImperial2004 C# Addict Join Date: Oct 2008 Location: Saudi Arabia Posts: 114	Any chance to include MB-Tree and VAQ/AutoVAQ controls soon ? What an awesome tool ! Arigatou ! Edit : I replaced x264_x86.exe file with an x264.nl build (after renaming off course) , RipBot 264 refused to encode with it ? Can someone shed some light ? __________________ AviDemux Windows Builds

27th September 2009, 19:03	#5806 \| Link
kikker Registered User Join Date: Feb 2007 Posts: 195	Remove the --nal-hrd from your profile. This option is not valid at least for 1259, the current recommended version. You can also find what went wrong in the Ripbot logs. BTW, 1-pass encodes go WAY down in bitrate with this build, and you need to lower the rate factor substantially in order to achieve a comparable quality encode. Last edited by kikker; 27th September 2009 at 19:08.

27th September 2009, 21:22	#5807 \| Link
gohamstergo Registered User Join Date: Jun 2009 Posts: 42	It seems my jobs queue disappeared because ripbot decided to change the hard drive it uses for temp files. Can there please be an option to select the temp file hard drive? This is the first problem ive encountered with ripbot directly, other than that its been working great. thanks! Last edited by gohamstergo; 27th September 2009 at 23:55.

26th September 2009, 14:52	#5801 \| Link
7ekno Guest Posts: n/a	Nice program, hadn't used it before Just a couple of quick questions (too speed workflow a little): 1) Is there a way of turning off the "Grabbing Frame" feature (using AVS scripts, so don't need to edit anything in the frameview - it slows down queing quite a bit with 0.15FPS filter chains!!!)? 2) Is there a way of setting an Audio format as default (and Normalisation values, etc)? I realise both of these may be an .INI feature, but I was unable to find the corrent syntax 7ek

27th September 2009, 22:29	#5808 \| Link
Atak_Snajpera RipBot264 author Join Date: May 2006 Location: Poland Posts: 7,815	Ripbot264.ini __________________ Windows 7 Image Updater - SkyLake\KabyLake\CoffeLake\Ryzen Threadripper

27th September 2009, 22:47	#5810 \| Link
kikker Registered User Join Date: Feb 2007 Posts: 195	Interesting. I'll have to perform more encodes, but I've experienced relatively large drops in overall file size of encodes since dropping in 1259 in Ripbot with a relative drop in quality at the same crf. The only thing I've had to change was removing the --nal-hrd switch of the default Blu-Ray profile to make it work with the latest Ripbot. EDIT: I'm now wondering if not cropping has anything to with it, as the encoder sees large areas of black. I'll have to test it with a cropped source. Last edited by kikker; 27th September 2009 at 22:53.

28th September 2009, 14:20	#5814 \| Link
Alex_080 User of X264 Join Date: Sep 2009 Posts: 103	Hi friends please help me in this problem with Ripbot264 1.14.4 when i convert a .avi file with ripbot264 the first step of audio encoding perfectly done but in when the pass 1 start it says job1 complete but nothing done ... is there any problem please tell me i use windos XP AviSynth 2.58 K-Lite Codec Pack 5.1 Last edited by Alex_080; 28th September 2009 at 14:26.*

28th September 2009, 17:44	#5816 \| Link
Blackwalker Registered User Join Date: Dec 2008 Posts: 239	hi i i'd like to updated my computer with a second system, windows 7 64bit rc, just to try it. Which ffdshow version'd i use? i fast checked and i didnt find a 64 bit version. someone can point me in the right direction? thx!

28th September 2009, 22:35	#5818 \| Link
TheImperial2004 C# Addict Join Date: Oct 2008 Location: Saudi Arabia Posts: 114	I am feeling that I am being ignored __________________ AviDemux Windows Builds