BD Rebuilder Beta - Bug Reports Only

[AmigaFuture]

Ha! About the same thought I had.. Mail it to him, include everything needed for him to return it to you. :-) The disk, not the entire Box Set. ;-)

[Prz]

Jdobbs manythanks for your excellent software which I've used sucessfulling for over a year. Unfortunately, my Win 7 64bit system crashed and I needed to reload Windows 7 and reinstall BDRB. I've been at it for a week and have followed the threads of previous posts on this issue. I've launched as administrator for ffreset, launched as admin for the BDRB application and get confirmation that the changes were made but continue to get the following message when running Inspect:

- Windows Version: 6.1 [7601]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3326], Ok
- WIN7 preferred AVC CODEC: Not Set correctly
- WIN7 preferred VC-1 CODEC: Not Set correctly
- WIN7 preferred MPEG2 CODEC: Not Set correctly
- FFDSHOW VC-1 set to "wmv9", Ok
- FFDSHOW MPEG2 set to "libmpeg2": Ok
- FFDSHOW AVC set to "libavcodec": Ok
- BD Rebuilder v0.40.0.8, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

I did run through one encoding which went to the end and produced an error code prior to burn of [2306 13:12:58 Do EncodingO 00053 2306]. I presume it was due to the Win7 codecs Not Set Correctly messages.

I saw the frequent pointer to "other programs" making changes however I can't detect which programs might be suspect.

There are sites which claim to have "tweekers" for Direct Show but I'm afraid to run them as they quickly change their program titles to something else which I suspect is a for fee type of service. Anyway, can you make any suggestions to get BDRB functioning.

[jidelite]

jdobbs, Forgive my ignorance regarding the "Movie and Menus" mode but is it possible to have an option to select a specific playlist (mpls) to re-encode with menus instead of blanking/editing individual streams associated with playlists?

jidelite

[Ch3vr0n]

@Prz: You don't happen to have UAC active by any chance do you? Ifso, pretty sure that's the problem. Disable UAC, launch BDRB as admin and let it do it's thing. You can then reset UAC to it's previous position but imo i'd leave that crap off. Does more harm then good anyway

[setarip_old]

Has anybody successfully made a FULL DISC copy of "The Three Musketeers" Blu-ray? If so:

1) What version number of what program did you use?

2) Are you CERTAIN it's a proper copy and NOT one that contains 51 chapters (Pieces of each of the real 17 chapters repeated 3 times throughout)?

[By-Tor]

Originally Posted by setarip_old

Has anybody successfully made a FULL DISC copy of "The Three Musketeers" Blu-ray? If so:

1) What version number of what program did you use?

2) Are you CERTAIN it's a proper copy and NOT one that contains 51 chapters (Pieces of each of the real 17 chapters repeated 3 times throughout)?

yes I have region B with no problems to a bd25
usind VERSION 0.40.08

[Capsbackup]

Originally Posted by setarip_old

Has anybody successfully made a FULL DISC copy of "The Three Musketeers" Blu-ray? If so:

1) What version number of what program did you use?

2) Are you CERTAIN it's a proper copy and NOT one that contains 51 chapters (Pieces of each of the real 17 chapters repeated 3 times throughout)?

My results appear just as you stated.. 2), with also the notification/black screen around the 18 minute mark : Copy detected, or a rip tool is running...
SlySoft says they are working on it, so maybe it is a ripping issue. BD-RB did not make a proper full backup of this title that was ripped with 7.0.2.0, even though the rip completed without any errors. However, I believe a proper movie only backup was successful choosing playlist 00437.mpls.

[setarip_old]

@By-Tor

Sorry if I was a bit unclear.

What program and version number did you use to decrypt your original, commercial Blu-ray disc, before usig BD-RB to compress it?

[Prz]

Originally Posted by Ch3vr0n

@Prz: You don't happen to have UAC active by any chance do you? Ifso, pretty sure that's the problem. Disable UAC, launch BDRB as admin and let it do it's thing. You can then reset UAC to it's previous position but imo i'd leave that crap off. Does more harm then good anyway

Turned down the UAC control to lowest seeting a few days age but no luck. Also turned off firewalls etc. Thanks for the suggestion tho.

[jidelite]

Originally Posted by setarip_old

Has anybody successfully made a FULL DISC copy of "The Three Musketeers" Blu-ray? If so:

1) What version number of what program did you use?

2) Are you CERTAIN it's a proper copy and NOT one that contains 51 chapters (Pieces of each of the real 17 chapters repeated 3 times throughout)?

I tried DVDFab 8.1.6.8 Qt (free DVDFab HD Decrypter). This seems to have successfully given me a proper backup of a region 1 disc (runtime 1:50:32 / 19 chapters).

jidelite

[setarip_old]

@jidelite

Thanks for that info ;>}

[By-Tor]

Originally Posted by setarip_old

@By-Tor

Sorry if I was a bit unclear.

What program and version number did you use to decrypt your original, commercial Blu-ray disc, before usig BD-RB to compress it?

sorry setrip_old, is this for narnia or the three muskerteer's ?
narnia not worked done 1st
three muskerteer's worked fine done second
it was anydvd hd 7.0.1.0 and have tried using 7.0.2.0
with the same results .

[omegaman7]

I've tried using 7.0.2.2. "Peer" has said it cannot be fixed at the moment, until they acquire a disc to correct the "bug" with anydvd.

[musiclover]

Originally Posted by jdobbs

Sorry, but there's zero chance that I'm going to fork out $127 for something I don't really want just to debug one disc... my donations don't even come close to covering what I already spend on discs for debugging... my sense of community spirit has to have limits.

Originally Posted by musiclover

I can understand that. So we have to wait for another disc that has the same problem.

Working back from 40.08 through old builds of BD-RB I finally had succes with version 39.04 and got a working full dvd9 backup. For FFDshow and the other packages I kept using the current ones from page 1.

So I guess changes made in 39.05 resulted in the "BD Rebuilder Experienced an error 2007 [time] CorrectEPData() 00006 2007" error.

I hope this helps.

[SnowSledder]

Okay, I've been using this software for some months now, and usually it works fine, but recently, I was making a copy of Pirates 2 and while attempting to convert to BD-25, I got the following error message:

[03/20/12] BD Rebuilder v0.40.08 (beta)
[11:53:18] Source: PIRATES2
- Input BD size: 39.88 GB
- Approximate total content: [03:38:30.905]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[11:53:18] PHASE ONE, Encoding
- [11:53:18] Processing: VID_00001 (1 of 18)
- [11:53:18] Extracting A/V streams [VID_00001]
- Error in attempt to extract audio/subs.
- AV frame too large (35724 bytes). Increase AV buffer.
[11:58:39] - Failed to retrieve audio, aborted

Since I'm NO expert on this stuff, I do not know how to increase the AV buffer. Any help would be greatly appreciated! Thanks!!!

Logfile posted below:

[Status]
LABEL=PIRATES2
VERSION=v0.40.08 (beta)
SOURCE_SIZE=42818591118
SOURCE_VIDEO_SIZE=41777516544
TARGET_SIZE=24641536000
REDUCTION=.564908194127433
RESIZE_1080=0
AUDIO_TO_KEEP=eng;
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=eng;
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
QUICK=0
[00001]
AUDIO=11000
PGS=100000

[SnowSledder]

The error seems to be a tsMuxeR error (http://linkai8425.wordpress.com/2008...o-large-error/).

I have just recently begun ripping and copying Blu-rays, so this explanation is more involved than I am used to. Maybe there's an easier way to fix this problem in BD-Rebuilder - if so, I'd appreciate someone posting the fix. Thanks!!!

[RobertM]

Hi Snow,

the "AV frame too large" error usually means there is some kind of input file corruption; usually from a bad rip. Try ripping that disc again and see what happens.

Regards,
Bob

[AmigaFuture]

With 40.08, Alternate MKV Intact Audio; chapters aren't being included. I'm also noticing chapters aren't being included in Movie-Only Backup, Custom Target Size. In both modes, they aren't in the Working Path directory upon TSMUXER extracting.

[rpareja]

I am having problems to make a FULL DISC copy of disk 5 from the TV Series GAME OF THRONES.

I removed all audio streams except english and removed all subtitles streams except english and spanish. BDRB gets stuck at the 31 of 42 title (at 16.99% overall progress).

Had no problems at all with the first 4 blu-rays.

Any suggestions?

[Marco33]

What line in the INI do I edit to have "Shutdown after rebuild" always on?