Media Player Classic - BE Win32/x64 - Page 185

arrgh · 19th March 2016, 02:47

Hi
I'm trying to set up a machine which is able to Play back 3d-mvc (without PowerDVD or StereoscopicPlayer, which both do work)...
Since for this, one needs madVR and LAV, I had to change the set-up of MPC-BE...

out of this, two questions arise :
- MPC-BE does not remember anymore the last Video Position if the playback is interrupted/stopped; how do I re-enable this Feature with LAV/madVR ?
- it would be nice, if MPC-BE would provide LAV and madVR as internal filters with Basic Settings, which would enable "out of the box" Standard playbach but also 3d... because I was not able to make it work for 3d (Standard 2d-1080p works but 3d only with but extrem stuttering/droped Frames)

Thanks

Socket774 · 19th March 2016, 05:20

Hello.
This is a latest mplayerc.ja.rc.txt.
It's based on [r1260].
http://www84.zippyshare.com/v/5EubAJS2/file.html

shinzero · 19th March 2016, 07:01

Hi Aleksoid1978.

Can we save the livestream from stdin to file while playing it in MPC-BE? Currently File->Save as doesn't work.

Aleksoid1978 · 19th March 2016, 07:29

Quote:

Originally Posted by shinzero

Hi Aleksoid1978.

Can we save the livestream from stdin to file while playing it in MPC-BE? Currently File->Save as doesn't work.

No - it's impossible.

v0lt · 19th March 2016, 11:12

@Socket774
Thanks. Updated in r1278.

Klaus1189 · 19th March 2016, 18:19

https://drive.google.com/file/d/0B4y...ew?usp=sharing
MPC-BE can't play this file -> I get so sound.
VLC media player can play it.

jmartinr · 19th March 2016, 20:03

Quote:

Originally Posted by shinzero

Hi Aleksoid1978.

Can we save the livestream from stdin to file while playing it in MPC-BE? Currently File->Save as doesn't work.

Just use Tee on stdin. That should work.

v0lt · 19th March 2016, 21:57

@Klaus1189
Fixed in r1286.

Klaus1189 · 21st March 2016, 11:06

Quote:

Originally Posted by v0lt

@Klaus1189
Fixed in r1286.

Thank you

I updated german translation based on r1291:
https://drive.google.com/file/d/0B4y...ew?usp=sharing

I found a menu which is a bit too small for almost all strings in dropdownlist:
https://drive.google.com/file/d/0B4y...ew?usp=sharing

Can you increase the size somehow, so the strings are not cut off?

Aleksoid1978 · 21st March 2016, 12:27

Quote:

Originally Posted by Klaus1189

I found a menu which is a bit too small for almost all strings in dropdownlist:
https://drive.google.com/file/d/0B4y...ew?usp=sharing

Can you increase the size somehow, so the strings are not cut off?

Done.

Klaus1189 · 21st March 2016, 12:27

Thank you

arrgh · 21st March 2016, 19:39

Quote:

Originally Posted by arrgh

Hi
...
- it would be nice, if MPC-BE would provide LAV and madVR as internal filters with Basic Settings, which would enable "out of the box" Standard playbach but also 3d...

I have to revise my request...
Nevcairiel confirmed that LAV will never do transcoding, so I will need also in future the MPC-BE internal filters to transcode aac-5.1 on the fly to ac3-5.1...

So, there remains only the issue that MPC-BE does not remember anymore (with LAV+madVR) the last playback position of the played videos...

thanks

huhn · 21st March 2016, 19:50

ffdshow can reencode too same for AC3 filter.

Klaus1189 · 22nd March 2016, 07:46

Quote:

Originally Posted by arrgh

I have to revise my request...
Nevcairiel confirmed that LAV will never do transcoding, so I will need also in future the MPC-BE internal filters to transcode aac-5.1 on the fly to ac3-5.1...

So, there remains only the issue that MPC-BE does not remember anymore (with LAV+madVR) the last playback position of the played videos...

thanks

I never used transcoding function, what is the purpose of that?

Klaus1189 · 22nd March 2016, 08:45

Quote:

Originally Posted by Aleksoid1978

Done.

https://drive.google.com/file/d/0B4y...ew?usp=sharing

Can you please increase the size of the drop down lists to the left, there should be some space also for other languages, so the strings aren't cut off when the longest ones are selected.

Aleksoid1978 · 22nd March 2016, 09:45

Quote:

Originally Posted by arrgh

So, there remains only the issue that MPC-BE does not remember anymore (with LAV+madVR) the last playback position of the played videos...

thanks

For me it's working fine, position remember and restore.

arrgh · 24th March 2016, 15:16

Quote:

Originally Posted by huhn

ffdshow can reencode too same for AC3 filter.

Quote:

Originally Posted by Klaus1189

I never used transcoding function, what is the purpose of that?

my mkv have all AAC Audio (typically 5.1) ;
I use SPDIF;
since the AV-Receiver is not able to decode AAC, I need to decode in the Player; with PCM I'm limited to Stereo; therefore the internal MPC-BE Decoder is set to pass through DD and DTS and to transcode everything else to AC3 which gives me 5.1...

in general I want to keep things simple : not install more codecs than necessary; LAV and madVR makes it already complicated enough... therefore I hoped that LAV could do it, so would not need to look in two places...but no such luck...

Klaus1189 · 26th March 2016, 07:57

Cannot play properly this 3840x2160 UHD 60.000p file with internal Filters. LAV Filters are fine.
http://distribution.bbb3d.renderfarm...fps_normal.mp4

wanezhiling · 26th March 2016, 10:51

Quote:

Originally Posted by Klaus1189

Cannot play properly this 3840x2160 UHD 60.000p file with internal Filters.

What do you mean 'not properly'?
It seems fine here with latest build 1298

Klaus1189 · 26th March 2016, 12:48

Look at display stats the red and green line should be parallel when using the Standard refresh rate of 60 Hz, but they don't. And you already see that the framerate is at about 28 fps, way too low. The videoengine is at about 98 %.
If I use external LAV Filters you see that the picture is played smooth at 60 Hz. The video engine is at very low load. Perfect playback.

When testing be sure to disable every external filter. Only use the internal ones of 1298. I used that version too.

19th March 2016, 02:47	#3681 \| Link
arrgh Registered User Join Date: Dec 2007 Posts: 128	3d and other issues Hi I'm trying to set up a machine which is able to Play back 3d-mvc (without PowerDVD or StereoscopicPlayer, which both do work)... Since for this, one needs madVR and LAV, I had to change the set-up of MPC-BE... out of this, two questions arise : - MPC-BE does not remember anymore the last Video Position if the playback is interrupted/stopped; how do I re-enable this Feature with LAV/madVR ? - it would be nice, if MPC-BE would provide LAV and madVR as internal filters with Basic Settings, which would enable "out of the box" Standard playbach but also 3d... because I was not able to make it work for 3d (Standard 2d-1080p works but 3d only with but extrem stuttering/droped Frames) Thanks Last edited by arrgh; 19th March 2016 at 02:52.

19th March 2016, 05:20	#3682 \| Link
Socket774 Registered User Join Date: Oct 2014 Location: Japan Posts: 14	Update Japanese translation Hello. This is a latest mplayerc.ja.rc.txt. It's based on [r1260]. http://www84.zippyshare.com/v/5EubAJS2/file.html

19th March 2016, 11:12	#3685 \| Link
v0lt Registered User Join Date: Dec 2008 Posts: 1,968	Update Japanese translation @Socket774 Thanks. Updated in r1278. __________________ MPC-BE 1.7.0 and Nightly builds \| VideoRenderer \| ImageSource \| ScriptSource \| BassAudioSource

19th March 2016, 21:57	#3688 \| Link
v0lt Registered User Join Date: Dec 2008 Posts: 1,968	@Klaus1189 Fixed in r1286. __________________ MPC-BE 1.7.0 and Nightly builds \| VideoRenderer \| ImageSource \| ScriptSource \| BassAudioSource

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

19th March 2016, 07:01	#3683 \| Link
shinzero Registered User Join Date: Dec 2015 Posts: 7	Hi Aleksoid1978. Can we save the livestream from stdin to file while playing it in MPC-BE? Currently File->Save as doesn't work.

19th March 2016, 18:19	#3686 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	https://drive.google.com/file/d/0B4y...ew?usp=sharing MPC-BE can't play this file -> I get so sound. VLC media player can play it.

21st March 2016, 12:27	#3691 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	Thank you

21st March 2016, 19:50	#3693 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,922	ffdshow can reencode too same for AC3 filter.

26th March 2016, 07:57	#3698 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	Cannot play properly this 3840x2160 UHD 60.000p file with internal Filters. LAV Filters are fine. http://distribution.bbb3d.renderfarm...fps_normal.mp4

26th March 2016, 12:48	#3700 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	Look at display stats the red and green line should be parallel when using the Standard refresh rate of 60 Hz, but they don't. And you already see that the framerate is at about 28 fps, way too low. The videoengine is at about 98 %. If I use external LAV Filters you see that the picture is played smooth at 60 Hz. The video engine is at very low load. Perfect playback. When testing be sure to disable every external filter. Only use the internal ones of 1298. I used that version too.