New PC for BD-Rebuilder?

[Mark_Venture]

Its time so I'm working out upgrading my old I7-860 with Asus P7P55D Deluxe board, 8 gig ram, etc.. to something newer.

As it stands, my current Rig is...
CPU: Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor w/Stock heatsink/fan
Motherboard: ASUS P7P55D Deluxe LGA 1156 Intel P55 ATX
Memory: 8 gig DDR3 - Qty2 of Corsair XMS3 CMX4GX3M2A1600C8
Case: Antec Nine Hundred II case with Antec EarthWatts EA750 power supply
Power: EVGA GeForce GTX 970 04G-P4-3979-KB (4gig SSC ACX2.0)
Drives:
Qty 1 - 250gb Samsung 840 SSD
Qty 1 - 1Tb Western Digital Black SATA II - WD1001FALS
Qty 1 - 3Tb Western Digital Caviar Green 3 TB SATA III 64 MB - WD30EZRX
Qty 1 - 3Tb Western Digital Mainstream/Blue SATA III - WD30EZRZ
Qty 1 - 4Tb Western Digital Mainstream/Blue SATA III - WD40EZRZ
Lite-On SOHD-167T DVDrom
LG BH16NS40 BD-RW/DVD-RW

Currently running 64bit Win 7 Ultimate

Note: for all intents and purposes, the WD Blue drives have similar specs as the Green.. i.e. 5400rpm, intellipower, etc


New parts I'm looking at are...
Motherboard: Asus Z170-DELUXE
CPU: Intel Boxed Core I7-6700K
Heatsink/fan: Cooler Master Hyper 212 EVO
Paste: Arctic Silver 5 AS5-3.5G Thermal Paste
Memory: G.Skill Ripjaws V 16GB (2x 8 GB) (Dual Channel Kit)
Case: Nanoxia Deep Silence 5 Rev. B Big Tower Case
Power supply: Seasonic X-850(SS-850KM3 Active PFC F3) 850W 80 Plus Gold *OR* Antec 750W 80-PLUS Gold

That being said, I'll bring all the drives over for now... EXCEPT, the 250Gig Samsung 840 which will be replaced by a 500Gig Samsung 850EVO. AND I want to replace the old WD 1TB Black with a new WD 3TB Black.

I'm working out the money (spent a little more during our Disney trip than expected)... so worst case, I'll just update Motherboard, CPU, heatsink/fan, and Memory for now, and the rest later.

I expect I'll load Win 10. I have six 2TB WD Green SATA3 drives left over from a previous raid setup that I was thinking of eventually adding in (hence the Z170-Deluxe w/many SATA ports, and the larger case that can hold all the drives). It might make a nice "striped storage pool" in Win 10 to use as for backup storage.

Should this setup....
1. Cause any issues with BD-Rebuilder?
2. Speed up my Alt Movie Only backups?

Anyone have any tips on optimizing the setup for BD-Rebuilder (mostly alt movie only, including 3D SBS)?

Is there anything I should look out for as I upgrade?

Thanks!