Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > (HD) DVD, Blu-ray & (S)VCD > DVD & BD Rebuilder

Reply
 
Thread Tools Search this Thread Display Modes
Old 5th March 2021, 19:31   #30421  |  Link
videoh
Useful n00b
 
Join Date: Jul 2014
Posts: 1,667
Might be due to a mismatch in framerate between the MKV container and the elementary stream. Can you post a link to a sample MKV that does this?
videoh is offline   Reply With Quote
Old 6th March 2021, 10:52   #30422  |  Link
tebasuna51
Moderator
 
tebasuna51's Avatar
 
Join Date: Feb 2005
Location: Spain
Posts: 6,881
That can happen also when video have Variable Frame Rate (it can be checked with MediaInfo).

Many anime mkv have VFR, also when video was encode with HandBrake defaults.
__________________
BeHappy, AviSynth audio transcoder.
tebasuna51 is offline   Reply With Quote
Old 6th March 2021, 14:39   #30423  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
mkv made with tsmuxer
after with tsmuxer uhd

========Job Started========
[09:02:12] Scanning source for UHD attributes...
- UHD and HDR attributes collected.
- Scan completed.
[09:02:46] Checking/Adjusting MPLS file...
- Found HEVC stream...
-- Type marker adjusted to UHD-BD HEVC...
-- Format marker adjusted to 2160p...
-- Version marker adjusted to be 0300...
[09:02:46] Checking/Adjusting CLPI file...
- Found HEVC stream...
-- Type marker adjusted to UHD-BD HEVC...
-- Format marker adjusted to 2160p...
-- Version marker adjusted to be 0300...
[09:02:47] Checking/Adjusting BDMV files...
- Added UHD-BD extension...
- Checked/Updated version in Index file...
- Checked/Updated version in MovieObject file...
[09:02:47] Checking/Adjusting M2TS file...
[10:28:11] TSMUXER TO UHD - SUCCESS
=========Job Ended=========t

after created bd structure with bdrebuilder but error again

[03/06/21] BD Rebuilder v0.61.21
[10:31:52] Source: TS_00000
- Input BD size: 65,91 GB
- Approximate total content: [02:20:36.803]
- Target BD size: 24,22 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Quality: Better (Faster), Two Pass
- UHD-BD source detected.
- Decoding/Frame serving: FFMPEG
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[10:31:52] PHASE ONE, Encoding
- [10:31:52] Processing: VID_00000 (1 of 1)
- [10:31:52] Extracting A/V streams [VID_00000]
- [11:13:35] Reencoding video [VID_00000]
- Source Video: HEVC, 3840x2160
- Rate/Length: 23,976fps, 202.281 frames
- Bitrate: 20.061 Kbs
- [11:13:35] Reencoding: VID_00000, Pass 1 of 2
[12:58:08] - Failed video encode, aborted

someone help me?
thanks
gamete is offline   Reply With Quote
Old 6th March 2021, 15:12   #30424  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by tebasuna51 View Post
That can happen also when video have Variable Frame Rate (it can be checked with MediaInfo).

Many anime mkv have VFR, also when video was encode with HandBrake defaults.
BD-RB uses MediaInfo to look for variable framerate when it imports. If it finds it, it reencodes it to CFR (using AVISYNTH & DirectshowSource to repeat frames as necessary).
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 6th March 2021, 15:16   #30425  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Quote:
Originally Posted by gamete View Post
error mkv to bluray

[03/05/21] BD Rebuilder v0.61.21
[13:01:13] Source: TENET_(2020)2160P_UHD_DTS-HD_AC3_ITA_ENG_HDR_HEVC
- Input BD size: 64,60 GB
- Approximate total content: [02:26:33.282]
- Target BD size: 24,22 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Quality: Better (Faster), Two Pass
- UHD-BD source detected.
- Decoding/Frame serving: FFMPEG
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[13:01:13] PHASE ONE, Encoding
- [13:01:13] Processing: VID_00000 (1 of 1)
- [13:01:13] Extracting A/V streams [VID_00000]
- [13:19:59] Reencoding video [VID_00000]
- Source Video: HEVC, 3840x2160
- Rate/Length: 23,976fps, 210.828 frames
- Bitrate: 19.377 Kbs
- [13:19:59] Reencoding: VID_00000, Pass 1 of 2
[13:20:01] - Failed video encode, aborted


inspect ok
Immediately after it fails, go to the BD-RB folder and open up LASTCMD.TXT. Then open a CMD window and cut-and-paste the command into it. That way at least you might get a better idea of what error is occurring.

Also -- make sure you have plenty of space in your WORKING folder.
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 6th March 2021 at 15:18.
jdobbs is offline   Reply With Quote
Old 6th March 2021, 15:39   #30426  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
Quote:
Originally Posted by jdobbs View Post
Immediately after it fails, go to the BD-RB folder and open up LASTCMD.TXT. Then open a CMD window and cut-and-paste the command into it. That way at least you might get a better idea of what error is occurring.

Also -- make sure you have plenty of space in your WORKING folder.
for file of 62 gb is it necessary 124 gb minimun ?
gamete is offline   Reply With Quote
Old 6th March 2021, 16:55   #30427  |  Link
gonca
Registered User
 
Join Date: Jul 2012
Posts: 1,213
Quote:
Originally Posted by gamete View Post
mkv made with tsmuxer
after with tsmuxer uhd

========Job Started========
[09:02:12] Scanning source for UHD attributes...
- UHD and HDR attributes collected.
- Scan completed.
[09:02:46] Checking/Adjusting MPLS file...
- Found HEVC stream...
-- Type marker adjusted to UHD-BD HEVC...
-- Format marker adjusted to 2160p...
-- Version marker adjusted to be 0300...
[09:02:46] Checking/Adjusting CLPI file...
- Found HEVC stream...
-- Type marker adjusted to UHD-BD HEVC...
-- Format marker adjusted to 2160p...
-- Version marker adjusted to be 0300...
[09:02:47] Checking/Adjusting BDMV files...
- Added UHD-BD extension...
- Checked/Updated version in Index file...
- Checked/Updated version in MovieObject file...
[09:02:47] Checking/Adjusting M2TS file...
[10:28:11] TSMUXER TO UHD - SUCCESS
=========Job Ended=========t

after created bd structure with bdrebuilder but error again

[03/06/21] BD Rebuilder v0.61.21
[10:31:52] Source: TS_00000
- Input BD size: 65,91 GB
- Approximate total content: [02:20:36.803]
- Target BD size: 24,22 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Quality: Better (Faster), Two Pass
- UHD-BD source detected.
- Decoding/Frame serving: FFMPEG
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[10:31:52] PHASE ONE, Encoding
- [10:31:52] Processing: VID_00000 (1 of 1)
- [10:31:52] Extracting A/V streams [VID_00000]
- [11:13:35] Reencoding video [VID_00000]
- Source Video: HEVC, 3840x2160
- Rate/Length: 23,976fps, 202.281 frames
- Bitrate: 20.061 Kbs
- [11:13:35] Reencoding: VID_00000, Pass 1 of 2
[12:58:08] - Failed video encode, aborted

someone help me?
thanks
Encoded for 1 hour 45 minutes
Might be temp/oc issue
or
free space issue
gonca is offline   Reply With Quote
Old 6th March 2021, 19:07   #30428  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
Microsoft Windows [Versione 10.0.19042.844]
(c) 2020 Microsoft Corporation. Tutti i diritti sono riservati.

C:\Users\Alex>"C:\Users\Alex\Desktop\BD_Rebuilder\tools\ffmpeg.exe" -probesize 100MB -i "F:\TS\BDMV\STREAM\00000.m2ts" -an -pix_fmt yuv420p10le -f yuv4mpegpipe -strict -1 - | "C:\Users\Alex\Desktop\BD_Rebuilder\tools\x265-64.exe" - --preset faster --profile main10 --uhd-bd --repeat-headers --vbv-bufsize 45000 --vbv-maxrate 48000 --hdr --chromaloc 2 --colorprim bt2020 --transfer smpte2084 --colormatrix bt2020nc --master-display "G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(40000000,50)" --max-cll "349,86" --fps 23.976 --sar 1:1 --qpfile "E:\NUOVA CARTELLA\WORKFILES\VID_00000.CHP" --keyint 24 --bitrate 20153 --y4m --stats "E:\NUOVA CARTELLA\WORKFILES\VID_00000.AVS.hevc.stats" --pass 1 --output NUL
ffmpeg version 3.4 Copyright (c) 2000-2017 the FFmpeg developers
built with gcc 7.2.0 (GCC)
configuration: --enable-gpl --enable-version3 --enable-sdl2 --enable-bzlib --enable-fontconfig --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libfreetype --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libtheora --enable-libtwolame --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libzimg --enable-lzma --enable-zlib --enable-gmp --enable-libvidstab --enable-libvorbis --enable-cuda --enable-cuvid --enable-d3d11va --enable-nvenc --enable-dxva2 --enable-avisynth --enable-libmfx
libavutil 55. 78.100 / 55. 78.100
libavcodec 57.107.100 / 57.107.100
libavformat 57. 83.100 / 57. 83.100
libavdevice 57. 10.100 / 57. 10.100
libavfilter 6.107.100 / 6.107.100
libswscale 4. 8.100 / 4. 8.100
libswresample 2. 9.100 / 2. 9.100
libpostproc 54. 7.100 / 54. 7.100
[mpegts @ 000002818ea45ec0] start time for stream 2 is not set in estimate_timings_from_pts
[mpegts @ 000002818ea45ec0] start time for stream 3 is not set in estimate_timings_from_pts
[mpegts @ 000002818ea45ec0] start time for stream 4 is not set in estimate_timings_from_pts
[mpegts @ 000002818ea45ec0] Could not find codec parameters for stream 2 (Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)): unspecified size
Consider increasing the value for the 'analyzeduration' and 'probesize' options
[mpegts @ 000002818ea45ec0] Could not find codec parameters for stream 3 (Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)): unspecified size
Consider increasing the value for the 'analyzeduration' and 'probesize' options
[mpegts @ 000002818ea45ec0] Could not find codec parameters for stream 4 (Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)): unspecified size
Consider increasing the value for the 'analyzeduration' and 'probesize' options
Input #0, mpegts, from 'F:\TS\BDMV\STREAM\00000.m2ts':
Duration: 02:30:09.99, start: 4200.000000, bitrate: 62838 kb/s
Program 1
Stream #0:0[0x1011]: Video: hevc (Main 10) (HDMV / 0x564D4448), yuv420p10le(tv, bt2020nc/bt2020/smpte2084), 3840x2160 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 90k tbn, 23.98 tbc
Stream #0:1[0x1100]: Audio: dts (DTS-HD MA) ([134][0][0][0] / 0x0086), 48000 Hz, 5.1(side), s16p
Stream #0:2[0x1200]: Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)
Stream #0:3[0x1201]: Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)
Stream #0:4[0x1202]: Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)
Stream mapping:
Stream #0:0 -> #0:0 (hevc (native) -> wrapped_avframe (native))
Press [q] to stop, [?] for help
[yuv4mpegpipe @ 0000028193f966c0] Warning: generating non standard YUV stream. Mjpegtools will not work.
Output #0, yuv4mpegpipe, to 'pipe:':
Metadata:
encoder : Lavf57.83.100
Stream #0:0: Video: wrapped_avframe, yuv420p10le, 3840x2160 [SAR 1:1 DAR 16:9], q=2-31, 200 kb/s, 23.98 fps, 23.98 tbn, 23.98 tbc
Metadata:
encoder : Lavc57.107.100 wrapped_avframe
y4m [info]: 3840x2160 fps 23976/1000 i420p10 sar 1:1 unknown frame count
raw [info]: output file: NUL
x265 [info]: HEVC encoder version 3.2.1+3-b4b2ecac21f6
x265 [info]: build info [Windows][GCC 9.2.0][64 bit] 10bit
x265 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2
x265 [warning]: uhd-bd: Turning off open GOP
x265 [warning]: uhd-bd: keyframeMin is always 1
x265 [info]: Main 10 profile, Level-5.1 (High tier)
x265 [info]: Thread pool created using 8 threads
x265 [info]: Slices : 1
x265 [info]: frame threads / pool features : 3 / wpp(34 rows)
x265 [info]: Coding QT: max CU size, min CU size : 64 / 8
x265 [info]: Residual QT: max TU size, max depth : 32 / 1 inter / 1 intra
x265 [info]: ME / range / subpel / merge : hex / 57 / 2 / 2
x265 [info]: Keyframe min / max / scenecut / bias: 1 / 24 / 40 / 5.00
x265 [info]: Lookahead / bframes / badapt : 15 / 4 / 0
x265 [info]: b-pyramid / weightp / weightb : 1 / 1 / 0
x265 [info]: References / ref-limit cu / depth : 2 / on / on
x265 [info]: AQ: mode / str / qg-size / cu-tree : 2 / 1.0 / 32 / 1
x265 [info]: Rate Control / qCompress : ABR-20153 kbps / 0.60
x265 [info]: VBV/HRD buffer / max-rate / init : 45000 / 48000 / 0.900
x265 [info]: tools: rd=2 psy-rd=2.00 early-skip rskip signhide tmvp fast-intra
x265 [info]: tools: strong-intra-smoothing lslices=8 deblock sao stats-write
x265 [error]: malloc of size 20951040 failedime=00:00:00.79 bitrate=4772805.4kbits/s speed=0.723x
x265 [error]: memory allocation failure, aborting encode
x265 [info]: consecutive B-frames: 100.0% 0.0% 0.0% 0.0% 0.0%

encoded 0 frames
aborted at input frame 23, output frame 0
av_interleaved_write_frame(): Broken pipe
Error writing trailer of pipe:: Broken pipetime=00:00:01.16 bitrate=4602347.3kbits/s speed=0.667x
frame= 28 fps= 10 q=-0.0 Lsize= 656100kB time=00:00:01.16 bitrate=4602347.3kbits/s speed=0.421x
video:14kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 4544317.000000%
Conversion failed!




----------------------
[03/06/21] BD Rebuilder v0.61.21
[16:13:42] Source: TS_00000
- Input BD size: 65,91 GB
- Approximate total content: [02:20:36.803]
- Target BD size: 24,32 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Quality: Better (Faster), Two Pass
- SHUTDOWN at completion enabled
- UHD-BD source detected.
- Decoding/Frame serving: FFMPEG
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[16:13:42] PHASE ONE, Encoding
- [16:13:42] Processing: VID_00000 (1 of 1)
- [16:13:42] Extracting A/V streams [VID_00000]
- [16:52:55] Reencoding video [VID_00000]
- Source Video: HEVC, 3840x2160
- Rate/Length: 23,976fps, 202.281 frames
- Bitrate: 20.153 Kbs
- [16:52:55] Reencoding: VID_00000, Pass 1 of 2
[18:03:29] - Failed video encode, aborted


----------------------
[03/06/21] BD Rebuilder v0.61.21
[16:13:42] Source: TS_00000
- Input BD size: 65,91 GB
- Approximate total content: [02:20:36.803]
- Target BD size: 24,32 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Quality: Better (Faster), Two Pass
- SHUTDOWN at completion enabled
- UHD-BD source detected.
- Decoding/Frame serving: FFMPEG
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[16:13:42] PHASE ONE, Encoding
- [16:13:42] Processing: VID_00000 (1 of 1)
- [16:13:42] Extracting A/V streams [VID_00000]
- [16:52:55] Reencoding video [VID_00000]
- Source Video: HEVC, 3840x2160
- Rate/Length: 23,976fps, 202.281 frames
- Bitrate: 20.153 Kbs
- [16:52:55] Reencoding: VID_00000, Pass 1 of 2
[18:03:29] - Failed video encode, aborted
[03/06/21] Checking System Settings
- BD-Rebuilder v0.61.21
- Windows Version: 6.2 [9200]
- Working Path Free Space: 164,56GB
- AVISYNTH Version: 2.6.0.6, Ok
- LAVFILTERS: Ok
- X264: Ok
- X265: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok
- FRIMEncode: Ok
- FRIMDecode: Ok
[03/06/21] Systems Settings Check complete

Last edited by gamete; 6th March 2021 at 19:11.
gamete is offline   Reply With Quote
Old 6th March 2021, 19:11   #30429  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
Quote:
Originally Posted by gonca View Post
Encoded for 1 hour 45 minutes
Might be temp/oc issue
or
free space issue
now i tried but error again with 164 gb of free space
post previous

Last edited by gamete; 6th March 2021 at 19:19.
gamete is offline   Reply With Quote
Old 6th March 2021, 19:22   #30430  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
i found also this problem
but the error for first time was with original mkv

original mkv is 02:30:10
bd structure created by tsmuxeruhd 02:20:36

strange
gamete is offline   Reply With Quote
Old 6th March 2021, 19:30   #30431  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
[Status]
LABEL=TS
VERSION=v0.61.21
SOURCE_SIZE=70772109312
SOURCE_VIDEO_SIZE=70772109312
TARGET_SIZE=26109542400
REDUCTION=.368924180073476
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=eng;ita;
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=all
BACKUP_MODE=1
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=0
DGDECIM=0
FRIMSOURCE=0
FFMS2=0
SSIF_MODE=0
UHD_V3_MODE=0
QUICK=0
ENCODE_STEP=1.5
[00000]
AUDIO=1
PGS=111
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=26109542400
RATE=20153
gamete is offline   Reply With Quote
Old 9th March 2021, 19:23   #30432  |  Link
gamete
Registered User
 
Join Date: May 2010
Posts: 134
i tried restore win 7
but same error
gamete is offline   Reply With Quote
Old 12th March 2021, 00:17   #30433  |  Link
spotswood
Registered User
 
Join Date: Mar 2009
Posts: 129
BDRB cannot confirm NVEnc capability

Hey all... when trying to enable the NVEnc encoder I get the error "BDRB cannot confirm NVEnc capability. Cannot select." I'm running the latest nVidia drivers v461.72, v0.61.21 of BDRB and a GTX1060 6GB card, which according to the chart is capable. Any ideas? Thanks...
Attached Images
  

Last edited by spotswood; 12th March 2021 at 04:31.
spotswood is offline   Reply With Quote
Old 12th March 2021, 00:44   #30434  |  Link
spotswood
Registered User
 
Join Date: Mar 2009
Posts: 129
Uhd_convert_enable=1

Hey again... took a crack at the new hidden option above. I reencoded "The Fifth Element" Blu-ray and it came out great, amazing UHD quality (to my eye at least) on my LG OLED. Took forever though (12+ hours! Is that normal?), hence my attempt with NVEnc and the problem in my previous post. Most "regular" Blu-ray encodes take no more than a couple hours with my Ryzen 2700X.

A couple things I noticed... I tried with Movie and Menus selected, and in the log it shows "Converting to UHD-BD (HEVC)" (pic attached). But when selecting "Movie Only" mode the same notation is not shown. I do have "Convert BD to UHD-BD (HEVC)" selected (see pic).The resulting job IS in fact HEVC, it's just not shown in the log as in M&M mode.

Also if I want to output to MKV w/HEVC and Intact Audio, which Alternate Movie Only Output should I select? Don't see that option. Other than that everything worked great, other than taking forever. Now if I can just get NVEnc enabled...
Attached Images
   

Last edited by spotswood; 12th March 2021 at 04:33. Reason: addl info...
spotswood is offline   Reply With Quote
Old 12th March 2021, 15:32   #30435  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
@spotswood

BD-RB runs NVENCC.EXE with the option "--check-features" in order to see if the installed card is capable of h.264 and/or h.265 encoding. Try that from a CMD window and post your results. Also, what card are you using? A GTX-1060?
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net

Last edited by jdobbs; 12th March 2021 at 15:41.
jdobbs is offline   Reply With Quote
Old 12th March 2021, 20:29   #30436  |  Link
spotswood
Registered User
 
Join Date: Mar 2009
Posts: 129
NVENCC.EXE --check-features

Quote:
Originally Posted by jdobbs View Post
@spotswood

BD-RB runs NVENCC.EXE with the option "--check-features" in order to see if the installed card is capable of h.264 and/or h.265 encoding. Try that from a CMD window and post your results. Also, what card are you using? A GTX-1060?
Thanks for your reply. Yes, as mentioned above I'm using a GTX-1060 6GB card with the latest nVidia drivers v461.72.

Results for NVENCC.EXE --check-features:

C:\Windows\system32>c:\users\em-ssd\downloads\bd-rbv06121\tools\nvenc\nvencc.exe --check-features
NVEncC (x86) 5.15 (r1658) by rigaya, Sep 12 2020 14:50:44 (VC 1900/Win/avx2)
[NVENC API v10.0, CUDA 8.0]
reader: raw, y4m, avi, avs, vpy, avsw, avhw [H.264/AVC, H.265/HEVC, MPEG2, VP8, VP9, VC-1, MPEG1, MPEG4]

Environment Info
OS : Windows 10 x64 (19042)
CPU: AMD Ryzen 7 2700X Eight-Core Processor (8C/16T)
RAM: Used 3577 MB, Total 16337 MB

#0: GeForce GTX 1060 6GB (1280 cores, 1771 MHz)[2147483.64]
NVEnc features
Codec: H.264/AVC
Max Bframes 4
B Ref Mode 2 (only middle)
RC Modes 63
Field Encoding 1 (field mode)
MonoChrome no
FMO no
Quater-Pel MV yes
B Direct Mode yes
CABAC yes
Adaptive Transform yes
Max Temporal Layers 4
Hierarchial P Frames no
Hierarchial B Frames no
Max Level 62
Min Level 10
4:4:4 yes
Min Width 33
Max Width 4096
Min Height 17
Max Height 4096
Multiple Refs no
Max LTR Frames 8
Dynamic Resolution Change yes
Dynamic Bitrate Change yes
Forced constant QP yes
Dynamic RC Mode Change no
Subframe Readback yes
Constrained Encoding yes
Intra Refresh yes
Custom VBV Bufsize yes
Dynamic Slice Mode yes
Ref Pic Invalidiation yes
PreProcess no
Async Encoding yes
Max MBs 65536
Lossless yes
SAO no
Me Only Mode 1 (I,P frames)
Lookahead yes
AQ (temporal) yes
Weighted Prediction yes
10bit depth no

Codec: H.265/HEVC
Max Bframes 0
B Ref Mode 0 (no)
RC Modes 63
Field Encoding 0 (no)
MonoChrome no
Quater-Pel MV yes
B Direct Mode no
Max Temporal Layers 0
Hierarchial P Frames no
Hierarchial B Frames no
Max Level 186
Min Level 30
4:4:4 yes
Min Width 65
Max Width 8192
Min Height 33
Max Height 8192
Multiple Refs no
Max LTR Frames 7
Dynamic Resolution Change yes
Dynamic Bitrate Change yes
Forced constant QP yes
Dynamic RC Mode Change no
Subframe Readback yes
Constrained Encoding yes
Intra Refresh yes
Custom VBV Bufsize yes
Dynamic Slice Mode yes
Ref Pic Invalidiation yes
PreProcess no
Async Encoding yes
Max MBs 262144
Lossless yes
SAO yes
Me Only Mode 1 (I,P frames)
Lookahead yes
AQ (temporal) no
Weighted Prediction yes
10bit depth yes


NVDec features
H.264/AVC: nv12, yv12
H.265/HEVC: nv12, yv12, yv12(9bit), yv12(10bit), yv12(12bit)
MPEG1: nv12, yv12
MPEG2: nv12, yv12
MPEG4: nv12, yv12
VP9: nv12, yv12
VC-1: nv12, yv12
spotswood is offline   Reply With Quote
Old 12th March 2021, 23:57   #30437  |  Link
jdobbs
Moderator
 
Join Date: Oct 2001
Posts: 20,973
Hmmm.... that looks like is should have worked. BD-RB just looks for the lines "Codec: H.264/AVC" and "Codec: H.265/HEVC" in the output.

Try adding the following to your INI file. That should force BD-RB to accept that you have a compliant card:

NVENC_CAPABLE=1
__________________
Help with development of new apps: Donations.
Website: www.jdobbs.net
jdobbs is offline   Reply With Quote
Old 13th March 2021, 00:40   #30438  |  Link
cartman0208
Registered User
 
Join Date: Jun 2010
Location: Germany
Posts: 205
Quote:
Originally Posted by spotswood View Post
...

Also if I want to output to MKV w/HEVC and Intact Audio, which Alternate Movie Only Output should I select? Don't see that option. ...
You can build your own profile by editing the alternate.txt in the BD-REBUILDER\Misc folder

Regarding the encoding time: bear in mind, that UHD is four times the pixels per picture than 1080p and HEVC is more complex than AVC, so 12+ hours is quite a good duration
cartman0208 is offline   Reply With Quote
Old 13th March 2021, 04:36   #30439  |  Link
spotswood
Registered User
 
Join Date: Mar 2009
Posts: 129
Nvenc_capable=1

Quote:
Originally Posted by jdobbs View Post
Hmmm.... that looks like is should have worked. BD-RB just looks for the lines "Codec: H.264/AVC" and "Codec: H.265/HEVC" in the output.

Try adding the following to your INI file. That should force BD-RB to accept that you have a compliant card:

NVENC_CAPABLE=1
That worked. I'm able to select the NVEnc encoder now, but the job aborts at the start of the reencoding process...??? Anyone else using a GTX-1060 6GB card that is working?

[03/12/21] BD Rebuilder v0.61.21
[17:16:58] Source: THE_MATRIX_00000
- Input BD size: 26.49 GB
- Approximate total content: [02:16:17.961]
- Target BD size: 24.00 GB
- Windows Version: 6.2 [9200]
- MOVIE-ONLY mode enabled
- Auto Quality: Very Good (Very Fast), VBR
- Decoding/Frame serving: NVENCC
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[17:17:00] PHASE ONE, Encoding
- [17:17:00] Processing: VID_00000 (1 of 1)
- [17:17:00] Extracting A/V streams [VID_00000]
- [17:22:14] Reencoding video [VID_00000]
- Source Video: VC-1, 1920x1080
- Rate/Length: 23.976fps, 196,075 frames
- Bitrate: 19,436 Kbs
- [17:22:14] Reencoding: VID_00000, Pass 1 of 1
[17:22:14] - Failed video encode, aborted

[Options]
VERSION=0.61.0.21
ENCODER=1
MODE=3
ENCODE_QUALITY=0
ONEPASS_ENCODING=0
AUTO_QUALITY=1
TARGET_SIZE=25600
AUDIO_TO_KEEP=eng;
SUBS_TO_KEEP=eng;
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AUDIO_DRC=0
DECODER=3
AVCHD=0
REMOVE_WORKFILES=1
REMOVE_OUTPUT=1
USE_FILTERS=0
BDMV_CERT_ONLY=1
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=1
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
PGSTOSRT=0
AUDIO_TRACK_LIMIT=1
SUBTITLE_TRACK_LIMIT=0
CUSTOM_TARGET_SIZE=24576
MOVIE_ONLY_LOOP=0
ENABLE_TEST=1
ENABLE_BLANKING=1
BLANK_THRESHOLD=1800
MULTIPROCESS=1
BEEP_SOUNDFILE=C:\Windows\Media\tada.wav
NVENC_CAPABLE=1
UHD_CONVERT_ENABLE=1
UHD_ALL_MODE=0
REENCODE_MENUS=0
MOVIEONLY_TYPE=0
ALTCRF=23
ALT_TARGET=1024
ALT_CRF_TARGET=1024
ALTMETHOD=0
ALTAUTOCROP=0
UHD_V3_MODE=1
[Paths]
DGIndexNV=C:\Users\eM-SSD\Downloads\dgdecnv2053\x32 Binaries\DGIndexNV.exe
DGDecNV=C:\Users\eM-SSD\Downloads\dgdecnv2053\x32 Binaries\DGDecodeNV.dll
SOURCE_PATH=N:\
WORKING_PATH=C:\USERS\EM-SSD\VIDEOS\HEVC\

Last edited by spotswood; 13th March 2021 at 04:42.
spotswood is offline   Reply With Quote
Old 13th March 2021, 04:37   #30440  |  Link
spotswood
Registered User
 
Join Date: Mar 2009
Posts: 129
Quote:
Originally Posted by cartman0208 View Post
You can build your own profile by editing the alternate.txt in the BD-REBUILDER\Misc folder.
Took a look but that's a little above my pay grade. @jdobbs, can you add an alternate output for MKV w/HEVC and Intact Audio in the next update? Or post the entry here and I can add it to the .txt file. Just not sure what to include. I can do a standard Blu-ray structure and then convert to MKV w Makemkv but that's an extra step. Thanks...

Last edited by spotswood; 13th March 2021 at 05:51.
spotswood is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:28.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.