BD Rebuilder Beta - Bug Reports Only

[jdobbs]

Originally Posted by bikerman

ok, that didn't work... 2 mins after I posted my last message I got BSod again.... (

Your system isn't stable. If you are overclocked -- you need to slow down your processor. X264 is the ultimate challange for overclocking. Also check your processor's heatsink for dust/dirt and clean if necessary. Reseat your memory modules.

[jdobbs]

Originally Posted by HiQ123

Hm, okay

Just for reference -- I've done the US version of "Pirates of the Caribbean" with no issues.

[HiQ123]

Originally Posted by jdobbs

Just for reference -- I've done the US version of "Pirates of the Caribbean" with no issues.

I will try it again...

[jdobbs]

Originally Posted by HiQ123

I will try it again...

Make sure you rip it again.

That error is coming from TSMUXER -- it is saying that one of the streams (usually an audio stream) has buffer requirements that aren't reasonable for something compliant with BD. That normally means a bad rip. Interestingly, in the exceptionally large number of discs I've done in testing, I don't remember ever actually seeing that error myself. It has been reported by others. I rip with AnyDVD HD.

[Weirdo]

BD Rebuilder (Error Condition) experienced an error 3304 [18:52:49] - CreateBDFiles() 00055 3304. If I press OK will it abort? Do you need log files? I can only see ErrLog.txt which only mentions that message.

edit: Prior to encoding, I set inspect.exe to display all ok. At the bottom: Resizing Subtitle_01 to 1280x720 PID: 4608, JAPANESE.

[AmigaFuture]

JDobbs,

Any thoughts about "The Incredibles"? I've notice with my "The Incredible Hulk (2008)" main move audio does the same thing when setting to re-render the DTS to AC3. Thanks.

[bikerman]

Originally Posted by jdobbs

Your system isn't stable. If you are overclocked -- you need to slow down your processor. X264 is the ultimate challange for overclocking. Also check your processor's heatsink for dust/dirt and clean if necessary. Reseat your memory modules.

Hi

I have no problems with any other apps, and this problem only started since the latest build of bdrebuilder... I am not overclocking either...

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)

[omegaman7]

Originally Posted by bikerman

Hi

I have no problems with any other apps, and this problem only started since the latest build of bdrebuilder... I am not overclocking either...

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)

I've used the new version more than a dozen times without fault. Given the season(hot weather), I'd look very closely at cooling your computer better?

[musiclover]

Originally Posted by bikerman

Hi

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)

You can go back by installing the old version and changing te date of your computer to the past.

[bikerman]

Originally Posted by musiclover

You can go back by installing the old version and changing te date of your computer to the past.

thanks will give it a go

[bikerman]

Originally Posted by omegaman7

I've used the new version more than a dozen times without fault. Given the season(hot weather), I'd look very closely at cooling your computer better?

hey dude

the cooling is not an issue over here, the weather aint very warm at all! lol

[ihmcjacky]

I face error when nearly finish the muxing process, Anyone know how to solve this? (I am quite sure it is not the file's problem)

Here is the log


----------------------
[07/18/12] BD Rebuilder v0.40.10 (beta)
[14:52:59] Source: MISSION_IMPOSSIBLE_(1996)
- Input BD size: 36.47 GB
- Approximate total content: [02:17:08.677]
- Target BD size: 22.95 GB
- Windows Version: 6.1 [7601]
- Auto Quality: Good (Very Fast), ABR
- Decoding/Frame serving: DirectShow
- Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[14:53:03] PHASE ONE, Encoding
- [14:53:03] Processing: VID_00351 (1 of 1)
- [14:53:03] Extracting A/V streams [VID_00351]
- [15:20:28] Reencoding video [VID_00351]
- Source Video: MPEG-4 (AVC), 1920x1080
- Rate/Length: 23.976fps, 177,792 frames
- Bitrate: 18,689 Kbs
- [15:20:28] Reencoding: VID_00351, Pass 1 of 1
- [19:08:04] Video Encode complete
- [19:08:04] Processing audio tracks
- Track 4352 (eng): Keeping original audio
- [19:08:05] Multiplexing M2TS
[19:34:22]PHASE ONE complete
[19:34:22]PHASE TWO - Rebuild Started
- [19:34:22] Rebuilding BD file Structure
- [19:34:22] CopyDirStructure() 00052 1200
- [19:40:20] CopyDirStructure() 00052 1200
[19:54:02] - Aborted at user request

[Ch3vr0n]

where's the rest of the log?

[Adbear]

Originally Posted by bikerman

Hi

I have no problems with any other apps, and this problem only started since the latest build of bdrebuilder... I am not overclocking either...

is there any way I can go back to previous version to see if it will crash on that version? (it never did before you see)

What stop code message are you getting?

[bikerman]

Originally Posted by Adbear

What stop code message are you getting?

i don't have time to write it down before is disappears..

however, after turning my clock back, and running the previous version, I did get an error stating that the h.264 (or whatever the number was) had stopped working...

clicked 'close the application' and got another BSoD...

[Adbear]

then you need to go into your advanced system settings and tell your system not to reboot on bluescreen

[bassnut]

Originally Posted by bikerman

i don't have time to write it down before is disappears..

however, after turning my clock back, and running the previous version, I did get an error stating that the h.264 (or whatever the number was) had stopped working...

clicked 'close the application' and got another BSoD...

When you get this message it is most likely do to an unstable system ..... X64 Has Stopped Working ..... Time to look at your OC or what else might be causing your sytem to be unstable.

[jdobbs]

Originally Posted by bikerman

i don't have time to write it down before is disappears..

however, after turning my clock back, and running the previous version, I did get an error stating that the h.264 (or whatever the number was) had stopped working...

clicked 'close the application' and got another BSoD...

Your system isn't stable. Whether you want to accept that doesn't really matter in the context of this thread. It isn't a bug and therefore shouldn't be posted here.

[Wizzu]

On one of my systems, I can't get bd rebuilder to work on any Blu-Ray with HD audio....

AFTEN errors when encoding AC3.

Here is what I get each and every time:

- [00:01:04] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- [00:01:07] Processing audio tracks
- Track 4352 (eng): Reencoding audio to AC3...
- ERROR in attempt to reencode audio (AFTEN) [AUD_00506_4352.AVS]
[00:01:08] - Failed to reencode audio, aborted

I tried everything I could think of: Re-configuring ffdshow, Uninstalling/reinstalling ffdshow, haaali and AVSynth... no joy.

Inspect results seem OK...

- Windows Version: 5.1 [2600]
- AVISYNTH Version: [2.5.8.0], Ok
- HAALI Splitter: [1.9.42.1], Ok
- FFDSHOW: [3882], Ok
- FFDSHOW VC-1 set "disabled", WMP11, Ok
- FFDSHOW MPEG2 set to "libavcodec": Ok
- FFDSHOW AVC set to "ffmpeg-mt": Ok
- BD Rebuilder v0.40.0.10, Ok
- X264: Ok
- AFTEN: Ok
- FAAC: Ok
- MP4BOX: Ok
- WAVI: Ok
- TSMUXER: Ok

I compared the settings (ffdshow and bd rebuilder) with my other computer, they are exactly the same.

Both computers run XP SP3.

But... everything works fine on the other computer and not on this one!

I'm at a loss.

[sonate]

Originally Posted by Wizzu

On one of my systems, I can't get bd rebuilder to work on any Blu-Ray with HD audio....

AFTEN errors when encoding AC3.

Here is what I get each and every time:
I tried everything I could think of: Re-configuring ffdshow, Uninstalling/reinstalling ffdshow, haaali and AVSynth... no joy.

Inspect results seem OK...
I compared the settings (ffdshow and bd rebuilder) with my other computer, they are exactly the same.

Both computers run XP SP3.

But... everything works fine on the other computer and not on this one!

I'm at a loss.

It may have more to do with the particular CPU's you are using and compatibility with the two versions of aften.exe BDRB incorporates.

The most ancient CPU's I've used and found workable results with current versions of BDRB are the P4-478 Northwood 3.2 and 3.0 . Maybe you should list what you are using, and if this is the problem possibly swap the CPU with one that is compatible?