Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion.

Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules.

 

Go Back   Doom9's Forum > Video Encoding > MPEG-4 Encoder GUIs

Reply
 
Thread Tools Search this Thread Display Modes
Old 31st March 2018, 18:19   #15701  |  Link
george84
Registered User
 
Join Date: Jan 2012
Posts: 104
Quote:
Originally Posted by Atak_Snajpera View Post
@george84
My solution is to add ConvertToYV12(matrix="rec709") to your PhotoDirList.xml.smil.avs. Problem solved.
Of course, but normally RipBot264 never needed this, so I thought there was an error in RipBot. I have many (>100) such AVS files which would all need editing now.
george84 is offline   Reply With Quote
Old 1st April 2018, 01:52   #15702  |  Link
burt123
Registered User
 
burt123's Avatar
 
Join Date: Jun 2010
Location: NSW, Australia.
Posts: 366
Quote:
Originally Posted by george84 View Post
I currently run 1.22.0, downloaded from first page of this forum.

Yesterday I was running 1.21, than there was an automatic update, which caused problems.

Then I downloaded 1.22.0 and it worked again. Today in the morning everything worked, at noon there was an automatic update which caused problems.
Hmm, still don't understand why you're a few versions behind...there's been approx 10 auto update's since the initial release of 1.22.0, and you should be running 1.22.2, at least.

If you did "re install" 1.22.0, then ran auto update's, you should have got a LOT, and ended up with the very latest build, 1.22.2. After a re start.

You do realize that it only "look's" for & installs update's every time the program is started ??

Atak needs to post a later build on the 1st page....
burt123 is offline   Reply With Quote
Old 1st April 2018, 07:48   #15703  |  Link
george84
Registered User
 
Join Date: Jan 2012
Posts: 104
Quote:
Originally Posted by burt123 View Post
Hmm, still don't understand why you're a few versions behind...there's been approx 10 auto update's since the initial release of 1.22.0, and you should be running 1.22.2, at least.

If you did "re install" 1.22.0, then ran auto update's, you should have got a LOT, and ended up with the very latest build, 1.22.2. After a re start.

You do realize that it only "look's" for & installs update's every time the program is started ??

Atak needs to post a later build on the 1st page....
To be more precise

1. I am running 1.22.0 (with auto update disabled) as downloaded and everything works.

2. I enable auto update, and restart RipBoot.

3. At start auto update is done, and it shows 1.22.2, I restart 1.22.2

4. I add a new job. Adding works without error.

5. I start encode of job and get error message.

Error is consequence of missing
Quote:
Convert
in RipBot generated jobx.avs file.

If you look at screenshot you see
Quote:
BT.709
in color primaries. Normally this field says
Quote:
AviSynth
.

Clearly RipBot changes behavior after auto update.
Attached Images
 
george84 is offline   Reply With Quote
Old 1st April 2018, 08:04   #15704  |  Link
burt123
Registered User
 
burt123's Avatar
 
Join Date: Jun 2010
Location: NSW, Australia.
Posts: 366
Quote:
Originally Posted by george84 View Post
To be more precise

1. I am running 1.22.0 (with auto update disabled) as downloaded and everything works.

2. I enable auto update, and restart RipBoot.

3. At start auto update is done, and it shows 1.22.2, I restart 1.22.2

4. I add a new job. Adding works without error.

5. I start encode of job and get error message.

Error is consequence of missing in RipBot generated jobx.avs file.

If you look at screenshot you see in color primaries. Normally this field says .

Clearly RipBot changes behavior after auto update.
Well, there must be something wrong somewhere else, 'cause I am running the very latest updated build, and it's all working well, on Windows Server 2016.

And just a heads up, attaching anything on this forum rarely gets cleared to open, so you either need to upload it a file sharing site, and paste the url, then it can be view, and or downloaded.

Or, paste a screenshot directly "on here"....
burt123 is offline   Reply With Quote
Old 1st April 2018, 09:10   #15705  |  Link
george84
Registered User
 
Join Date: Jan 2012
Posts: 104
@burt123
Thank you. I can live with original downloaded RipBot. Maybe in future someone else will run into same problem.
george84 is offline   Reply With Quote
Old 1st April 2018, 14:54   #15706  |  Link
silverback
Registered User
 
Join Date: Mar 2012
Posts: 13
Hello to All,

Great work as usual, thanks for Windows 7 Updater.

Unrelated question: I am trying to run DE in a VM with multiple vCPU. Will RipBot DE client run on Windows Server?
silverback is offline   Reply With Quote
Old 1st April 2018, 18:38   #15707  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,806
Windows is Windows.
Atak_Snajpera is offline   Reply With Quote
Old 1st April 2018, 19:46   #15708  |  Link
silverback
Registered User
 
Join Date: Mar 2012
Posts: 13
Quote:
Originally Posted by Atak_Snajpera View Post
Windows is Windows.
Thank You I will look into this.
silverback is offline   Reply With Quote
Old 1st April 2018, 19:57   #15709  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,806
I remember that some user even used some extremely stripped down version of windows for DE mode. WinPE (without taskbar!) or something like that. I don't remember now. It was couple years ago...

Last edited by Atak_Snajpera; 1st April 2018 at 20:00.
Atak_Snajpera is offline   Reply With Quote
Old 1st April 2018, 21:32   #15710  |  Link
Ryushin
Registered User
 
Ryushin's Avatar
 
Join Date: Mar 2011
Posts: 431
Normalize Bug?

I think I found a bug with the Normalize function if Temp drive is something other then C:

The jobXX_EncodeAudio1.cmd command has the cd line to change in the beginning to change to the tools\ffmpeg\bin directory. Since my Temp is D:, this did not work. Adding C: to the beginning of the script allowed the command to work correctly.
Then running jobXX_MuxFiles.cmd allowed the job to complete.


BTW, I like the use of the *nix shell commands. So very useful.
Ryushin is offline   Reply With Quote
Old 2nd April 2018, 05:22   #15711  |  Link
burt123
Registered User
 
burt123's Avatar
 
Join Date: Jun 2010
Location: NSW, Australia.
Posts: 366
Quote:
Originally Posted by silverback View Post
Thank You I will look into this.
Yep, I've been running Windows Server 2016 with Ripbot for a long time. Use DE 100% of the time.
burt123 is offline   Reply With Quote
Old 2nd April 2018, 12:44   #15712  |  Link
byteshare
ByteShare
 
byteshare's Avatar
 
Join Date: Sep 2014
Location: On the Internet
Posts: 560
DE Client Issues

I have a PC that is using a VPN, which creates two networks.
If I have a Encoding Server start on bootup, it starts and shows my local ip address (192.xxx..), but after that any new servers uses the VPN network (10.xxx..). I can see the computer from the my main machine via both a ping and by browsing to a fileshare.
I can ping the 192.xxx.. address.

Is there anything I can do to get this working, or am I out of luck if I need this Encoding Server to be on a VPN?
byteshare is offline   Reply With Quote
Old 2nd April 2018, 13:22   #15713  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,806
You could try to delay encoding server start. You can do that in Task Scheduler.

Atak_Snajpera is offline   Reply With Quote
Old 2nd April 2018, 14:08   #15714  |  Link
JASAN
Registered User
 
Join Date: Dec 2015
Posts: 11
Quote:
Originally Posted by byteshare View Post
I have a PC that is using a VPN, which creates two networks.
If I have a Encoding Server start on bootup, it starts and shows my local ip address (192.xxx..), but after that any new servers uses the VPN network (10.xxx..). I can see the computer from the my main machine via both a ping and by browsing to a fileshare.
I can ping the 192.xxx.. address.

Is there anything I can do to get this working, or am I out of luck if I need this Encoding Server to be on a VPN?

I've found, as long as the machine running the encoding server can reach the pc hosting, you shouldn't have a problem.

go to file explorer, and type in from the computer that is not working \\computername to make sure you can see the ripbot share that it creates.

could be a username permissions thing too, don't forget that part.
JASAN is offline   Reply With Quote
Old 2nd April 2018, 17:15   #15715  |  Link
byteshare
ByteShare
 
byteshare's Avatar
 
Join Date: Sep 2014
Location: On the Internet
Posts: 560
Quote:
Originally Posted by JASAN View Post
I've found, as long as the machine running the encoding server can reach the pc hosting, you shouldn't have a problem.

go to file explorer, and type in from the computer that is not working \\computername to make sure you can see the ripbot share that it creates.

could be a username permissions thing too, don't forget that part.
Yup, was a password/username issue. I usually use .\username for the username but in this case I just needed to put the full computername\username this time...not sure why but it works.
Thank you!
byteshare is offline   Reply With Quote
Old 3rd April 2018, 16:52   #15716  |  Link
byteshare
ByteShare
 
byteshare's Avatar
 
Join Date: Sep 2014
Location: On the Internet
Posts: 560
HEVC Stable Branch bumped a version: http://msystem.waw.pl/x265/
2.7+3
byteshare is offline   Reply With Quote
Old 4th April 2018, 23:43   #15717  |  Link
silverback
Registered User
 
Join Date: Mar 2012
Posts: 13
Quote:
Originally Posted by burt123 View Post
Yep, I've been running Windows Server 2016 with Ripbot for a long time. Use DE 100% of the time.
Thank you, working well with numerous vCPU cores.
silverback is offline   Reply With Quote
Old 6th April 2018, 11:11   #15718  |  Link
Privateer5000
Registered User
 
Join Date: May 2014
Posts: 31
Hiho. I am totally amazed by this Program, especially from the Distributed Encoding Feature. Thanks a lot.
I have some questions for 2 Issues i was unable to solve or find a solution.
1.) I there a way to tell Ripbot to index all files which are included in a Source MKV File? Example. When adding a MKV File in Ripbot with 2 HD Audio Tracks (True-HD or DTS-Master) only the first audio track is indexed. When i am selecting the second audio Track i have to wait until Ripbot has finished to index it before i can change any other value. While doing Batch Encoding this i really annoying. It would be better if Ripbot is doing it directly when it creates the Jobs. Is there a way to enable this?
2.) I was unable to do a x264 Encode with OpenCL Acceleration when using Intel Integrated Graphics. I have 2 Workstation, one with a i7-3770k and one with a i7-4790. On both Ripbot is doing an encoding only if Acceleration is disabled. I tried several different drivers, but none was working. I always get an unknown OpenCl Error. Any Ideas, I also tried to install the Intel OpenCl SDK but it won't work. If this would work, i could use DE Mode on 3 Machines, at the moment i am only using 2 after i installed a GTX 260 i one of my Workstations and that thing is loud :-)

Thanks a lot.

Greets Seb
Privateer5000 is offline   Reply With Quote
Old 6th April 2018, 12:18   #15719  |  Link
Atak_Snajpera
RipBot264 author
 
Atak_Snajpera's Avatar
 
Join Date: May 2006
Location: Poland
Posts: 7,806
1) good idea. I will see what I can do.
2) Unfortunately I have Intel CPU without iGPU so I won't be able to help you in this case. Post whole error message so maybe other users here will be able to help you with this issue.
Atak_Snajpera is offline   Reply With Quote
Old 6th April 2018, 15:30   #15720  |  Link
Privateer5000
Registered User
 
Join Date: May 2014
Posts: 31
Thanks for your answer.

Here is the Log File when i try to encode with OpenCL Acceleration on a Single Machine:

C:\>"C:\MKV\RipBot264\Tools\ffmpeg\bin\ffmpeg.exe" -loglevel panic -i "C:\Temp\RipBot264temp\job6\job6.avs" -strict -1 -f yuv4mpegpipe - | "C:\MKV\RipBot264\tools\x264\x264_x64.exe" --colorprim bt709 --transfer bt709 --colormatrix bt709 --opencl --opencl-device 1 --opencl-clbin "C:\Users\User\AppData\Local\Temp\x264_lookahead.clbin" --crf 22 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 62088 --sar 1:1 --level 4.1 --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "C:\Temp\RipBot264temp\video.264" -
y4m [info]: 1920x1080p 1:1 @ 24000/1001 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 4600
x264 [info]: Compiling OpenCL kernels...
x264 [info]: profile High, level 4.1
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: x264_encoder_encode failed

x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode

aborted at input frame 46, output frame 0

C:\>"C:\MKV\RipBot264\tools\mkvtoolnix\mkvmerge.exe" -o "C:\MKVWork\Encode\s02e06.mkv" --compression 0:none --title "s02e06" --default-duration 0:24000/1001fps "C:\Temp\RipBot264temp\video.264" --compression 0:none --language 0:ger --sync 0:0 "C:\Temp\RipBot264temp\job6\2_audio_German.dtsma" --compression 0:none --language 0:eng "C:\Temp\RipBot264temp\job6\Encoded_Audio_2.ac3" --default-track 0:yes --forced-track 0:yes --language 0:ger -s 0 -D -A "C:\Temp\RipBot264temp\job6\5_subtitles_German.sup" --default-track 0:no --language 0:ger -s 0 -D -A "C:\Temp\RipBot264temp\job6\4_subtitles_German.sup" --default-track 0:no --language 0:eng -s 0 -D -A "C:\Temp\RipBot264temp\job6\3_subtitles_English.sup" --chapters "C:\Temp\RipBot264temp\job6\chapters.txt"
mkvmerge v22.0.0 ('At The End Of The World') 32-bit
Error: The type of file 'C:\Temp\RipBot264temp\video.264' could not be recognized.

-------------------------

Elapsed Time: 00h:00m:26s

And this is the Output of the Encoding Server if i try DE Mode:

Encoding started...
""\\VIPER\Ripbot264temp\Tools\ffmpeg\bin\ffmpeg.exe" -loglevel panic -i "\\VIPER\RipBot264temp\job6\Chunks\1.avs" -strict -1 -f yuv4mpegpipe - | "\\VIPER\Ripbot264temp\tools\x264\x264_x64.exe" --seek 0 --colorprim bt709 --transfer bt709 --colormatrix bt709 --opencl --opencl-device 1 --opencl-clbin "C:\Users\User\AppData\Local\Temp\x264_lookahead.clbin" --crf 22 --fps 24000/1001 --force-cfr --min-keyint 24 --keyint 240 --frames 1437 --sar 1:1 --level 4.1 --tune film --aud --nal-hrd vbr --vbv-bufsize 62500 --vbv-maxrate 62500 --stdin y4m --output "\\VIPER\RipBot264temp\job6\Chunks\1.264" -"
y4m [info]: 1920x1080p 1:1 @ 24000/1001 fps (cfr)
x264 [info]: using SAR=1/1
x264 [info]: using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX FMA3 BMI2 AVX2
x264 [info]: OpenCL acceleration enabled with Intel(R) Corporation Intel(R) HD Graphics 4600
x264 [info]: profile High, level 4.1
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: x264_encoder_encode failed

x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode
x264 [error]: OpenCL: Invalid value.
x264 [error]: OpenCL: fatal error, aborting encode

aborted at input frame 46, output frame 0

Encoding terminated.


Connection Closed Gracefully.

Maybe someone has an Idea.

Another Question.
In DE Mode, would it be possible that every Machine has a different Setting for the OpenCL Acceleration and the Encoding Servers are using the Setting of the Machine they are runnig on? With the actual Ripbot Version the Settings of the Host Machine will be used for every involved Server and overrides the Setting of the local machines running the Encoding Servers. If this would work it would be a Solution for the Intel Graphic Problem.

Last edited by Privateer5000; 6th April 2018 at 15:33.
Privateer5000 is offline   Reply With Quote
Reply

Tags
264, 265, appletv, avchd, bluray, gui, iphone, ipod, ps3, psp, ripbot264, x264 2-pass, x264 gui, x264_64, x265, xbox360

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:30.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.