Media Player Classic - BE Win32/x64 - Page 276

Siso · 12th July 2018, 21:24

Quote:

Originally Posted by Klaus1189

Is this really a issue in MPC-BE?
Maybe it's related to the OS or any program running on the pc of the two guys?
I had never any issue on any pc here at home, it doesn't matter AMD/Nvidia/Intel graphics with an AMD/Intel CPU. Had every possible combination and used both Windows 7 and 10.

In mpc-hc everything is fine, even in vlc. The problem is only iwth mpc-be.

chros · 13th July 2018, 14:48

Quick question: can we seek in YouTube clips? (using 1.5.2 beta (I don't remember the build number))
Yesterday I wanted to do so and I couldn't. Thanks!

chros · 13th July 2018, 19:00

Sorry for the false alarm: it was LAV splitter that buffered the data and that's why seeking didn't work. All is good with the internal splitters.

mogli · 21st July 2018, 06:45

Whenever I update my soundcard drivers the MPC audio renderer is resetted to the primary audio device although I use a different one with MPC-BE.

Why is this happening? No other software I have does this and the names of the audio devices stay the same all the time anyhow.

Klaus1189 · 21st July 2018, 08:25

1.) What audio chipset and driver?
2.) What OS? Complete, like Win 7 SP1 64-bit or Win 10 18.03 64-bit
3.) What device do you use normally and what device for MPC-BE?
4.) Do you have your device you use for MPC-BE selected as default in audio settings of OS?

Grimsdyke · 21st July 2018, 13:48

I have the same problem as Mogli but I always thought I am the only one so I never posted this. (Win10 64bit on a AsRock J4205-ITX)

Klaus1189 · 21st July 2018, 16:08

So you also have two different audio devices connected to you pc, where the first is set as default device, but the second one is used in MPC-BE?

Grimsdyke · 21st July 2018, 16:43

Dual-audio-out in MPC-BE activated and one output is HDMI (TV) and the other is Analog-7.1 (Receiver).
After driver update BE looses the HDMI device and falls back to default and although the TV is set to default in the OS settings there is NO sound !!! So I always have to renew this setting in BE.
This happens also sometimes when I change the refresh rate of the TV.
No big issue but still somewhat annoying.

Klaus1189 · 21st July 2018, 16:54

Why not simply one HDMI connection from pc to AVR and then HDMI to TV?

v0lt · 21st July 2018, 18:43

I do not recommend updating the drivers when the player is running.
I recommend using DirectSound for dual audio output (MPC Audio Renderer may not work correctly in this mode).

mogli · 21st July 2018, 19:42

Quote:

Originally Posted by v0lt

I do not recommend updating the drivers when the player is running.

The player isn't running while updating. That's the point: How does MPC-BE even know the driver version changed and why does it trigger a device change in such a situation?

huhn · 21st July 2018, 19:51

when updating GPU driver the sound device is removed and added after installing again and it is not unusual that the "new" audio device is set as default by windows or GPU driver installer.

so mpc-BE may not see it as the same device after updating

v0lt · 21st July 2018, 19:54

@mogli
1. Do you have a problem with MPC Audio Renderer only? Does DirectSound work fine?
2. What version of MPC-BE?
3. Which version of Windows?

Aleksoid1978 · 22nd July 2018, 11:17

Quote:

Originally Posted by Grimsdyke

Dual-audio-out in MPC-BE activated and one output is HDMI (TV) and the other is Analog-7.1 (Receiver).
After driver update BE looses the HDMI device and falls back to default and although the TV is set to default in the OS settings there is NO sound !!! So I always have to renew this setting in BE.
This happens also sometimes when I change the refresh rate of the TV.
No big issue but still somewhat annoying.

With HDMI output sound is "not easy" - windows can change device guid in system after reboot. It also depends on what to run first - the computer or the receiver. I use HDMI output and suffer from it sometimes.

Aleksoid1978 · 22nd July 2018, 11:19

Quote:

Originally Posted by mogli

Whenever I update my soundcard drivers the MPC audio renderer is resetted to the primary audio device although I use a different one with MPC-BE.

Why is this happening? No other software I have does this and the names of the audio devices stay the same all the time anyhow.

What WASAPI mode use - Exclusive or Shared ?
Do you enable "Exclusive mode" in audio settings in system.

Zero3K · 23rd July 2018, 01:22

MPC-BE has an issue with streams that are being piped by StreamBuffRe (http://www.streambuffre.com). Viewing one or more streams at a time eventually results in the playback freezing on a frame and eventually going black. Looking at the Statistics shows that the buffer is at 0 KB for all values. According to the developer of StreamBuffRe, it is being caused because MPC-BE doesn't handle buffer underruns that well.

Aleksoid1978 · 23rd July 2018, 02:49

Quote:

Originally Posted by Zero3K

MPC-BE has an issue with streams that are being piped by StreamBuffRe (http://www.streambuffre.com). Viewing one or more streams at a time eventually results in the playback freezing on a frame and eventually going black. Looking at the Statistics shows that the buffer is at 0 KB for all values. According to the developer of StreamBuffRe, it is being caused because MPC-BE doesn't handle buffer underruns that well.

Can you give me more details - how i can run, parameters and so ...
I never using StreamBuffRe and nothing don't know about it software.

Klaus1189 · 23rd July 2018, 19:01

I just recognized that MPC-BE.1.5.2.3818.x64.7z from https://yadi.sk/d/hlf1lfC8mKU58/1.5.2.3818 is always a 0 Byte file.
But MPC-BE.x64.7z from https://yadi.sk/d/hlf1lfC8mKU58/!_last is fine. Very strange.

v0lt · 23rd July 2018, 19:33

Klaus1189
Maybe the "disk space" is over.

Aleksoid1978 · 24th July 2018, 03:24

Quote:

Originally Posted by Zero3K

MPC-BE has an issue with streams that are being piped by StreamBuffRe (http://www.streambuffre.com). Viewing one or more streams at a time eventually results in the playback freezing on a frame and eventually going black. Looking at the Statistics shows that the buffer is at 0 KB for all values. According to the developer of StreamBuffRe, it is being caused because MPC-BE doesn't handle buffer underruns that well.

It's StreamBuffRe very strange.
I can connect, but can't read data from it.
Use InternetReadFileExW() for read data - it's always return 0.
So - when using only internal filters, for data read using system source filter - File Source(URL).

P.S. it's don't accept connection if User-agent contains space or -. It's very strange limitation.

13th July 2018, 14:48	#5502 \| Link
chros Registered User Join Date: Mar 2002 Posts: 2,323	Quick question: can we seek in YouTube clips? (using 1.5.2 beta (I don't remember the build number)) Yesterday I wanted to do so and I couldn't. Thanks! __________________ Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) \| madvr config

13th July 2018, 19:00	#5503 \| Link
chros Registered User Join Date: Mar 2002 Posts: 2,323	Sorry for the false alarm: it was LAV splitter that buffered the data and that's why seeking didn't work. All is good with the internal splitters. __________________ Ryzen 5 2600,Asus Prime b450-Plus,16GB,MSI GTX 1060 Gaming X 6GB(v398.18),Win10 LTSC 1809,MPC-BEx64+LAV+MadVR,Yamaha RX-A870,LG OLED77G2(2160p@23/24/25/29/30/50/59/60Hz) \| madvr config

21st July 2018, 18:43	#5510 \| Link
v0lt Registered User Join Date: Dec 2008 Posts: 1,968	I do not recommend updating the drivers when the player is running. I recommend using DirectSound for dual audio output (MPC Audio Renderer may not work correctly in this mode). __________________ MPC-BE 1.7.0 and Nightly builds \| VideoRenderer \| ImageSource \| ScriptSource \| BassAudioSource

21st July 2018, 19:54	#5513 \| Link
v0lt Registered User Join Date: Dec 2008 Posts: 1,968	@mogli 1. Do you have a problem with MPC Audio Renderer only? Does DirectSound work fine? 2. What version of MPC-BE? 3. Which version of Windows? __________________ MPC-BE 1.7.0 and Nightly builds \| VideoRenderer \| ImageSource \| ScriptSource \| BassAudioSource

23rd July 2018, 19:33	#5519 \| Link
v0lt Registered User Join Date: Dec 2008 Posts: 1,968	Klaus1189 Maybe the "disk space" is over. __________________ MPC-BE 1.7.0 and Nightly builds \| VideoRenderer \| ImageSource \| ScriptSource \| BassAudioSource

21st July 2018, 06:45	#5504 \| Link
mogli Registered User Join Date: May 2015 Posts: 106	Whenever I update my soundcard drivers the MPC audio renderer is resetted to the primary audio device although I use a different one with MPC-BE. Why is this happening? No other software I have does this and the names of the audio devices stay the same all the time anyhow.

21st July 2018, 08:25	#5505 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	1.) What audio chipset and driver? 2.) What OS? Complete, like Win 7 SP1 64-bit or Win 10 18.03 64-bit 3.) What device do you use normally and what device for MPC-BE? 4.) Do you have your device you use for MPC-BE selected as default in audio settings of OS?

21st July 2018, 13:48	#5506 \| Link
Grimsdyke Registered User Join Date: Nov 2013 Location: Hannover, Germany Posts: 292	I have the same problem as Mogli but I always thought I am the only one so I never posted this. (Win10 64bit on a AsRock J4205-ITX)

21st July 2018, 16:08	#5507 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	So you also have two different audio devices connected to you pc, where the first is set as default device, but the second one is used in MPC-BE?

21st July 2018, 16:43	#5508 \| Link
Grimsdyke Registered User Join Date: Nov 2013 Location: Hannover, Germany Posts: 292	Dual-audio-out in MPC-BE activated and one output is HDMI (TV) and the other is Analog-7.1 (Receiver). After driver update BE looses the HDMI device and falls back to default and although the TV is set to default in the OS settings there is NO sound !!! So I always have to renew this setting in BE. This happens also sometimes when I change the refresh rate of the TV. No big issue but still somewhat annoying.

21st July 2018, 16:54	#5509 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	Why not simply one HDMI connection from pc to AVR and then HDMI to TV?

21st July 2018, 19:51	#5512 \| Link
huhn Registered User Join Date: Oct 2012 Posts: 7,922	when updating GPU driver the sound device is removed and added after installing again and it is not unusual that the "new" audio device is set as default by windows or GPU driver installer. so mpc-BE may not see it as the same device after updating

23rd July 2018, 01:22	#5516 \| Link
Zero3K Registered User Join Date: Aug 2005 Posts: 30	MPC-BE has an issue with streams that are being piped by StreamBuffRe (http://www.streambuffre.com). Viewing one or more streams at a time eventually results in the playback freezing on a frame and eventually going black. Looking at the Statistics shows that the buffer is at 0 KB for all values. According to the developer of StreamBuffRe, it is being caused because MPC-BE doesn't handle buffer underruns that well.

23rd July 2018, 19:01	#5518 \| Link
Klaus1189 Registered User Join Date: Feb 2015 Location: Bavaria Posts: 1,667	I just recognized that MPC-BE.1.5.2.3818.x64.7z from https://yadi.sk/d/hlf1lfC8mKU58/1.5.2.3818 is always a 0 Byte file. But MPC-BE.x64.7z from https://yadi.sk/d/hlf1lfC8mKU58/!_last is fine. Very strange.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode