Welcome to Doom9's Forum, THE in-place to be for everyone interested in DVD conversion. Before you start posting please read the forum rules. By posting to this forum you agree to abide by the rules. |
11th January 2019, 20:12 | #1401 | Link |
Registered User
Join Date: Nov 2018
Posts: 55
|
hi
2 moar bugs not really important ones 1) lets assume u made a movie and its bad it ended up too big u go to completed tab right click restore and change qrf20 to 21 and denoise from light to medium or something now if u do the same thing with a movie that is processing . lets say current queue encodes a movie and its at 10% and its already like 500mb so it will end up +-5gb. u stop the encode and right click on the movie to change the values for some reason the program sets the values to the preset selected AND NOT THE ACTUAL VALUES U SELECTED when u pressed encode so for instance if u selected preset X and changed the values abit like made the default qrf25 into 22 and no denoise into medium restoring the movie FROM THE QUEUE (not from completed) will restore it wiyth qrf25 and no denoise isntead of what u selected 2) this must be relevant to the previous bug and i suspect it might be relevant to how picker system is handled but a similar bug exists with time selection remember when i told u about a bug where if u pick a picker with a specific time selection the autoname feature is disabled and the name is stuck ? then u fixed it and now the autorename function works even with a picker that has a specific time selection. (obviusly the autorename function works always for complete movie pickers) what i found out , out of the blue, is that if u manually change the time selection (that the picker selects lets say from 1 00 00 to 1 06 40) to lets say 0 30 00 to 0 35 00 (basically anything that is not handled by a picker ) and then proceed to start encode . then the completed encode if u right click and edit the autorename function is disabled again basically i found out about this bug due to the fact that some movies coisidently the sample at 1 00 00 mark was bad so i had to use an other scene obviously this is not a major bug and i dont even care abotu fixing it just wanted to point it out . i assume that the whole code with time selections , picker , and autorename fucntion from completed tab is too messy and very easy to create such bugs anyway as usual thanks for ur wonderfull program already encoded 500+ movies and keep going any hope to add custom log folder? Last edited by napouser; 11th January 2019 at 20:15. |
12th January 2019, 19:12 | #1402 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Having trouble reproducing those bugs. It brings the correct values back when editing for me. Maybe you could break them out into explicit steps?
1) Step 1 2) Step 2 ... etc As for custom log folder. I have that change with a bunch of other log changes waiting for the next Beta release (after I get Stable out the door). |
12th January 2019, 19:48 | #1403 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 4.28:
This release includes everything from the v4 Betas:
|
13th January 2019, 08:59 | #1404 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 5.0 Beta:
|
14th January 2019, 06:28 | #1405 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 4.29:
|
15th January 2019, 07:14 | #1406 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 5.1 Beta:
|
16th January 2019, 07:07 | #1407 | Link |
Registered User
Join Date: Nov 2018
Posts: 55
|
one request for beta
"Changed to use .part suffix while encoding the video. When done, it deletes failed partial files and renames completed files " can we get an option in settings to DISABLE autodeleting failed PARTs ? i like junk cauze it allows me to know if a movie failed (happens 1 in 20 movies) so i can deal with it it also allows me to stop encoding any time and take a look at the incomplete file for quality/info watching the completed tab is not much use for me cauze it shows few stuff and some times the failures get lost in the sea of succesfull ones "Having trouble reproducing those bugs. It brings the correct values back when editing for me. Maybe you could break them out into explicit steps?" its a little bit hard for me as well some times it works some times doesnt have definetaly seen it tho even today i saw it with beta 5.0 basically district9 was too big stopped it mid way edit and settings were like preset instead of what i have setup them i remember it specifically cauze i had to stop the movie 2 times . started with qrf 19 then 20 then had to do it in 21 . both 2 times i restored settings the audio went to the stadard 448kbs of the preset instead of the 640kbs i had choosen originally (cauze the movie was 7.1) this DOES NOT happen if u restore a movie from the completed as far as the other bug its not really important and only happens if u change the specific time frame that u got from the picker into something else and then proceed to restore a completed one . it will have a stuck name . not really important tho Last edited by napouser; 16th January 2019 at 07:10. |
17th January 2019, 02:54 | #1408 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
If you need to know when something failed I don't think a junk file is the best way to communicate that. I'd rather have something in the UI, maybe on the completed tab. Would it be helpful to have the tab header say Completed (27, 2 failed) or something?
|
17th January 2019, 04:01 | #1409 | Link |
Registered User
Join Date: Nov 2018
Posts: 55
|
how about if some1 decides to stop an encode midway . why not being able to look at the file to see the results?
also i am not asking to leave the part files i am asking for an advanced option to disable deleting. u can still leave the delete option by default for most people |
17th January 2019, 06:54 | #1410 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
It's a bit more complex than just turning off deleting. If they get left there then the next encode is going to need to use a different .part name. If I added that option I'd need to rename the file to something like .failed.mp4 or .stopped.mp4 . But that would be a reasonable option.
|
21st January 2019, 07:03 | #1413 | Link | |
Registered User
Join Date: Nov 2018
Posts: 55
|
Quote:
i assume that other are more knowledgable in those things as i am not really that experienced only been doing this a couple of months i think vidcoder has a preview function that can quickly encode a small portion and show it inside the program to get an idea personally however what i do is when i add the initial queue of movies of the week to encode (lets say 25 movies) and i need to find out what qrf to use for each one (some take 21 some 24) i use the picker function of the program. this picker presets uses a custom folder for samples uses specific settings such as no audio no subs so u actually test only the video size and finally it allows me to pick a specific timeframe so i just pick 1 00 00 to 1 06 40 so drag and drop 25 movies 25 samples are created if each one is around 100mb then the qrf u selected gave 2000kbs if some movie ends up 200mb the qrf resulted in 4000kbs and then u keep reencoding them from completed tab until u get the sample u want |
|
22nd January 2019, 06:56 | #1414 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 4.30:
|
25th January 2019, 08:25 | #1415 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 5.2 Beta:
|
26th January 2019, 04:06 | #1416 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 4.31:
|
26th January 2019, 04:19 | #1417 | Link |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Released VidCoder 5.3 Beta:
|
26th January 2019, 21:58 | #1418 | Link |
Registered User
Join Date: Nov 2018
Posts: 55
|
hi
request can u add preset and qrf colloumn in completed tab like in queue tab so when some1 wants to reencode soemthing cauze it went too big or too small to know wich settings to change? (some times restored from completed does not maintain the settings entirely) |
27th January 2019, 03:42 | #1419 | Link | |
VidCoder Author
Join Date: Sep 2003
Posts: 702
|
Quote:
|
|
28th January 2019, 05:23 | #1420 | Link |
Registered User
Join Date: Nov 2018
Posts: 55
|
not really. problem is inconsistent happens rarely and most of the time i am not even sure if the program changed the settings back to default or i just used the defaults for the preset for some reason
thats why i am asking for the qrf in completed becauze if i restore a qrf 22 and it goes to 20 then its obvius that something resets the settings |
Thread Tools | Search this Thread |
Display Modes | |
|
|