RipBot264 v1.18.3 - Simple and easy to use GUI -> IPOD . PSP . CONSOLES . BLURAY

[Ajax_Undone]

Originally Posted by JungleBoy

Oh yes, I see it now - perhaps it was the grey on white text that made it difficult to see. Black on White would be easier or White on Black - for us decrepid old people.

In order to make the app black on white he would need to go through almost 120 bmp files and change the colour manualy!!! I wouldn't do it!!! I don't think he's would either...

Sorry I think you are out of luck on the colour change...

[zirkov]

Any idea how to increase the video quality, I'm using 2-pass and set my bitrate to 300. I compared with Bencos (mencoder GUI), and the quality is better than ripbot (using same bitrate). I like using ripbot because it easy to use and I can do hardsub.

[Atak_Snajpera]

Any idea how to increase the video quality, I'm using 2-pass and set my bitrate to 300.

Use CQ (22) instead of 2-pass with extremely low bitrate. 300kbps are you insane?!?!

In order to make the app black on white he would need to go through almost 120 bmp files and change the colour manualy!!!

True Have you counted them all ?

I wonder, is it possible to do a true lossless encoding yet? For instance, I have a 'Kill Bill 1' H264 file here, that I like to encode subtitles in (my Japanese isn't all that good, LOL). RipBot264 has proven perfect for adding subtitles, but I hate to lose extra quality; so I'd rather just re-use the existing stream.

lossless encoding means HUUUUUUUUUUGE file size.

[Ajax_Undone]

Originally Posted by Atak_Snajpera

True Have you counted them all ?

No lucky guess though I figured I was exaggerating...

[mmmmdonut]

Got a 264 level question. I pulled down a few of the free HD TV Shows off of iTunes and poking around using mediainfo I saw they were encoded using 3.1 level. For the aTV setting in RB264 is there any benefit using the 3.1 level over the 3.0 level? Glancing through the h264 wiki it looks like the 3.1 level allows more macroblocks/sec and higher bit rate but in terms of what the aTV can actually handle I dont see a benefit but being a curious individual figured I would throw it out to you experts for an answer.

Cheers.

[zirkov]

I encode for make the video size smaller ^_^ that's why usually I'm using 300 bitrate. Btw any idea how to make DENOISE option work ? I tried for my anime video but it wont encode, I got this error log :

avis [error]: unsupported input format (DIB )
x264 [error]: could not open input file 'C:\temp\RipBot264temp\job1\job1.avs'

[brogan]

I just used RipBot to convert Monsters, Inc from 1440x1040 25 fps to 1920x1080 23.976 fps...it looks & plays smooth, but the audio is way off...is there an easy way to convert a .dts or .ac3 stream that's 25 fps to 23.976 fps? Is there a guide to doing this?

[Atak_Snajpera]

I just used RipBot to convert Monsters, Inc from 1440x1040 25 fps to 1920x1080 23.976 fps...it looks & plays smooth, but the audio is way off...is there an easy way to convert a .dts or .ac3 stream that's 25 fps to 23.976 fps? Is there a guide to doing this?

You forgot to change option under a/v same length to STRETCH

Btw any idea how to make DENOISE option work ?

You need GFX card with pixel shader 2.0 or higher. It works on my Laptop (Radeon x700 128MB). It worked on my old Radeon 1950 256 MB and now it also works on my brand new Radeon 4850 512MB. So as you can see I had no problems with FFT3DGPU plugin.

For the aTV setting in RB264 is there any benefit using the 3.1 level over the 3.0 level?

there is no benefit at all. it is just an information written into video stream. Nothing more.

[zirkov]

Thanks you, its worked fine right now. Btw its okay to change for latest x264.exe ?

[juGGaKNot]

Originally Posted by Ajax_Undone

In order to make the app black on white he would need to go through almost 120 bmp files and change the colour manualy!!! I wouldn't do it!!! I don't think he's would either...

Sorry I think you are out of luck on the colour change...

I can do that, a link for them and i will edit.

[Ajax_Undone]

LOL whatcha' think Atak hes offering to cut half the work out of it... ;-)

I still think its a waste of time to do... What type of monitor do you have JuggaKNot...

I recommend a new one with at least 600:1 contrast ratio it will help you see the wording better..

[asarian]

Originally Posted by Atak_Snajpera

lossless encoding means HUUUUUUUUUUGE file size.

Okay, thanks. Got another problem, though: the AddBorders command is a no-go. I added this to the Preview script:

AddBorders(0, 32, 0, 248)

(on a 1920:800p stream). That should give me a nice 1080p resolution, right? Only when I click 'preview', I keep getting this error:

"invalid arguments to function AddBorders"

Any idea what might be causing it?

EDIT: Never mind, solved it. I had forgotten the source.

video=AddBorders(video, 0, 32, 0, 248)

Does the trick.

[juGGaKNot]

Originally Posted by Ajax_Undone

LOL whatcha' think Atak hes offering to cut half the work out of it... ;-)

I still think its a waste of time to do... What type of monitor do you have JuggaKNot...

I recommend a new one with at least 600:1 contrast ratio it will help you see the wording better..

Dell P1130 1600x1200@100 HZ.

If atak wants it done i'm willing.

[asarian]

Originally Posted by Ajax_Undone

LOL whatcha' think Atak hes offering to cut half the work out of it... ;-)

I still think its a waste of time to do... What type of monitor do you have JuggaKNot...

I recommend a new one with at least 600:1 contrast ratio it will help you see the wording better..

Actually, he's not wrong at all: the 'near-white on white' color-scheme gives it a fancy look perhaps, but makes things hardly legible. And before you ask, yes, I have a very good LCD monitor. If someone offers to change it for him, then the true waste, way I see it, is not taking him up on his offer.

[Atak_Snajpera]

Actually, he's not wrong at all: the 'near-white on white' color-scheme gives it a fancy look perhaps, but makes things hardly legible. And before you ask, yes, I have a very good LCD monitor.

I have 19" LG Flatron L194WT-SF (mat) connected via DVI


I see all font without any problems. End of story.

Those small fonts have gray color (R:160;G:160;B:160) so as you can see these values are still far away from white (R:255;G:255;B:255). Therefore you should see them quite easily.

[juGGaKNot]

Originally Posted by Atak_Snajpera

End of story.

There you go.

PS : upgraded to 1.10.6 with "oficial" avisynth 2.5.7 and not 2.5 alpha 2.5.8 RC4 and all problems are far away.

[over-killer]

I know this has been talked about before, but I couldn't find it. I would like to keep 2 audio tracks for one of my bluray's. The first one is french w/ english sub's and the other is the english audio. Is there any way to do that with ripbot or should I hard encode the french audio w/ english subs w/ ripbot and use tsmuxer to add the english audio?

Thanks

[juGGaKNot]

Originally Posted by over-killer

I know this has been talked about before, but I couldn't find it. I would like to keep 2 audio tracks for one of my bluray's. The first one is french w/ english sub's and the other is the english audio. Is there any way to do that with ripbot or should I hard encode the french audio w/ english subs w/ ripbot and use tsmuxer to add the english audio?

Thanks

no audio in Ripbot + mkvtoolnix 2.3.0 for the audio tracks is what i do.

I asked atak, there will be no "2 audio tracks" in ripbot

the other way ( might crash ripbot ) edit the audio.bat and mux.bat after adding a job.

[over-killer]

@Atak

I'm trying to convert my copy of equilibrium from hddvd to bluray. For some reason when I put it into ripbot a horn blows and says there is only 450 frames. I am using version 1.10.6 and didn't have a problem with version 1.10.5 when I changed it to a bd9. What should I send you to trouble shoot this?

Thanks

[malgates]

Hi,

i converted one of my HD DVDS to an MKV with this tutorial:

http://forum.doom9.org/showthread.php?t=137128 Sektion 3.

So I got a MKV File with 2 Audio Stream and thougt "why not convert it with ripbot?". So I converted them to Bluray. I selected 2 Pass encoding with 8048 Mbits and the Playstation 3 Profile. After 12 hours of encoding I got a Blu-Ray Folder with a M2TS Stream with 800 MB. How is that possible? Did I do s.th. wrong? I am trying it again right now with a fixed size of 8500 MB. Hopefully that will work.

Can anyone give me a hint?

Regards