BD Rebuilder Beta - Bug Reports Only

[jdobbs]

Originally Posted by gamete

I can buy this pc in forum
No scam

But i ask to you if this pc can be good for male backup 4k in bd25

Thanks

Honestly, if you are planning to do 4K backups, you'd probably be better off investing in an NVIDIA video card that does encoding (mine is a GTX-1660). The prices have gone up recently (I'm guessing it's the global chip shortage -- but don't know). But, if you look around you can find them cheap enough. Encoding with the GPU is several times faster than CPU -- and 4K encoding can really bog down a CPU.

But, as always, that's just an opinion. Yours matters more.

[jetli]

movie ends instead of repeats and restarts at beginning.
what is causing this.
can i fix it back to restart movie at beginning after the end?
thanks tony

[jdobbs]

Originally Posted by jetli

movie ends instead of repeats and restarts at beginning.
what is causing this.
can i fix it back to restart movie at beginning after the end?
thanks tony

Nothing has changed related to that in this version. But there is a hidden option to enable that behavior. See HIDDENOPTS.TXT.

You can add:

MOVIE_ONLY_LOOP=1

to rebuilder.ini.

[jdobbs]

@Timmy256

Please review rules 7 and 8. Repeating a post (I've removed the repeat), especially one as large as yours, isn't appropriate. If you do it again I'll be forced to issue a strike. It's good that you provide detail, but I'd suggest you make the images smaller -- when a post is as large as yours and has giant images dominating the view, people tend to just skip over it.

[Timmy256]

Thanks @jdobbs!

Sorry for the repost. I though that my post wasn’t working, after waiting for a week to register and post; hence why I reposted. I didn’t see it here, neither did I get any notification saying that it wasn’t approved for some reason.

I’ll try to re-adapt it to fit the rules you mentioned. I’ve tried to include as much detail as possible, as the support posts I’ve read, pretty much always miss a lot of detail on the issue; that’s why I went overboard.

Would it be OK to try posting after I readapt it to the rules or is there any way to pre-check with you if it’s OK by then?

Thanks again!

[videoh]

Welcome to the forum Timmy! Sending you a friend request.

[Timmy256]

Thanks videoh! I just accepted it.

[videoh]

Thank you. Onward and upward, Timmy.

[LowDead]

A couple of interesting updates/fixes from NVEncC 5.35, if you want to add it to the next BDRB release jdobbs.

Latest NVEenC

[jdobbs]

Originally Posted by LowDead

A couple of interesting updates/fixes from NVEncC 5.35, if you want to add it to the next BDRB release jdobbs.

Latest NVEenC

I'll do some testing an add it to the next release.

[RetsimLegin]

Originally Posted by jdobbs

Modified the method for reencoding E-AC3 files that are imported. Some systems and sources had randomly experienced channel count discrepancies in the old method.

Just confirming - I have recently worked a few E-AC3 titles and have not seen the previous miscalculation of channel numbers recur. Thanks.

[SquallMX]

I'm getting desync subtitles on v0.61.25 even when using "No Reencode":

[11/16/21] BD Rebuilder v0.61.25
[09:44:30] Source:  MAD_MAX_3_BEYOND_THUNDERDOME
  - Input BD size: 28.25 GB
  - Approximate total content: [02:01:48.667]
  - Target BD size: 28.32 GB
  - Windows Version: 6.2 [9200]
  - MOVIE and MENUS mode enabled
  - Quality: High Quality (Default), Two Pass
  - X264 Tweak(s) enabled
  - Decoding/Frame serving: DGDecNV
  - Audio Settings: AC3=0 DTS=0 HD=1 Kbs=640
[09:44:34] PHASE ONE, Encoding
 - [09:44:34] Blanking: VID_00007 (1 of 38)
 - [09:44:34] Blanking: VID_00016 (2 of 38)
 - [09:44:34] Blanking: VID_00035 (3 of 38)
 - [09:44:34] Blanking: VID_00042 (4 of 38)
 - [09:44:34] Blanking: VID_00043 (5 of 38)
 - [09:44:34] Blanking: VID_00046 (6 of 38)
 - [09:44:34] Blanking: VID_00024 (7 of 38)
 - [09:44:34] Blanking: VID_00037 (8 of 38)
 - [09:44:34] Blanking: VID_00051 (9 of 38)
 - [09:44:34] Blanking: VID_00021 (10 of 38)
 - [09:44:34] Blanking: VID_00048 (11 of 38)
 - [09:44:34] Blanking: VID_00052 (12 of 38)
 - [09:44:34] Blanking: VID_00038 (13 of 38)
 - [09:44:34] Blanking: VID_00039 (14 of 38)
 - [09:44:34] Blanking: VID_00050 (15 of 38)
 - [09:44:34] Blanking: VID_00047 (16 of 38)
 - [09:44:34] Blanking: VID_00022 (17 of 38)
 - [09:44:34] Blanking: VID_00041 (18 of 38)
 - [09:44:34] Blanking: VID_00034 (19 of 38)
 - [09:44:34] Blanking: VID_00049 (20 of 38)
 - [09:44:34] Blanking: VID_00008 (21 of 38)
 - [09:44:34] Blanking: VID_00045 (22 of 38)
 - [09:44:34] Blanking: VID_00044 (23 of 38)
 - [09:44:34] Blanking: VID_00055 (24 of 38)
 - [09:44:34] Blanking: VID_00010 (25 of 38)
 - [09:44:34] Blanking: VID_00018 (26 of 38)
 - [09:44:34] Blanking: VID_00069 (27 of 38)
 - [09:44:34] Blanking: VID_00011 (28 of 38)
 - [09:44:34] Blanking: VID_00006 (29 of 38)
 - [09:44:34] Processing: VID_00003 (30 of 38)
 - [09:44:34] Extracting A/V streams [VID_00003]
 - [09:44:38] Reencoding video [VID_00003]
 - [09:44:38] Keeping original video (no reencode)
 - [09:44:38] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [09:44:38] Multiplexing M2TS
 - [09:44:42] Blanking: VID_00002 (31 of 38)
 - [09:44:42] Blanking: VID_00004 (32 of 38)
 - [09:44:42] Blanking: VID_00012 (33 of 38)
 - [09:44:42] Blanking: VID_00014 (34 of 38)
 - [09:44:42] Blanking: VID_00013 (35 of 38)
 - [09:44:42] Processing: VID_00057 (36 of 38)
 - [09:44:42] Extracting A/V streams [VID_00057]
 - [09:44:47] Reencoding video [VID_00057]
 - [09:44:47] Keeping original video (no reencode)
 - [09:44:47] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
 - [09:44:47] Multiplexing M2TS
 - [09:44:51] Blanking: VID_00015 (37 of 38)
 - [09:44:51] Processing: VID_00061 (38 of 38)
 - [09:44:51] Extracting A/V streams [VID_00061]
 - [09:45:30] Reencoding video [VID_00061]
 - [09:45:30] Keeping original video (no reencode)
 - [09:45:30] Processing audio tracks
   - Track 4352 (eng): Keeping original audio
   - Track 4353 (fra): Keeping original audio
   - Track 4354 (deu): Keeping original audio
   - Track 4355 (ita): Keeping original audio
   - Track 4356 (spa): Keeping original audio
   - Track 4357 (spa): Keeping original audio
   - Track 4358 (por): Keeping original audio
   - Track 4359 (ces): Keeping original audio
   - Track 4360 (hun): Keeping original audio
   - Track 4361 (pol): Keeping original audio
   - Track 4362 (rus): Keeping original audio
   - Track 4363 (jpn): Keeping original audio
 - [09:45:30] Multiplexing M2TS
[09:46:07]PHASE ONE complete
[09:46:07]PHASE TWO - Rebuild Started
 - [09:46:07] Rebuilding BD file Structure
[09:46:33] - Encode and Rebuild complete
[09:46:33] JOB: MAD_MAX_3_BEYOND_THUNDERDOME finished.

[Status]
LABEL=MAD_MAX_3_BEYOND_THUNDERDOME
VERSION=v0.61.25
SOURCE_SIZE=30331871654
SOURCE_VIDEO_SIZE=29999794176
TARGET_SIZE=30408704000
REDUCTION=1.00256109577117
RESIZE_1080=0
RESIZE_1440=0
AUDIO_TO_KEEP=all
KEEP_HD_AUDIO=-1
SUBS_TO_KEEP=all
BACKUP_MODE=0
MOVIEONLY_TYPE=0
USE_LAVF=0
INSTANCES=1
DGDECNV=-1
DGDECIM=0
FRIMSOURCE=0
FFMS2=0
SSIF_MODE=0
UHD_V3_MODE=0
QUICK=1
ENCODE_STEP=0
COMPLETED=38
REBUILD_COMPLETE=1
[00007]
USE_ORIGINAL=1
[00016]
USE_ORIGINAL=1
[00035]
USE_ORIGINAL=1
[00042]
USE_ORIGINAL=1
[00043]
USE_ORIGINAL=1
[00046]
USE_ORIGINAL=1
[00024]
USE_ORIGINAL=1
[00037]
USE_ORIGINAL=1
[00051]
USE_ORIGINAL=1
[00021]
USE_ORIGINAL=1
[00048]
USE_ORIGINAL=1
[00052]
USE_ORIGINAL=1
[00038]
USE_ORIGINAL=1
[00039]
USE_ORIGINAL=1
[00050]
USE_ORIGINAL=1
[00047]
USE_ORIGINAL=1
[00022]
USE_ORIGINAL=1
[00041]
USE_ORIGINAL=1
[00034]
USE_ORIGINAL=1
[00049]
USE_ORIGINAL=1
[00008]
USE_ORIGINAL=1
[00045]
USE_ORIGINAL=1
[00044]
USE_ORIGINAL=1
[00055]
USE_ORIGINAL=1
[00010]
USE_ORIGINAL=1
[00018]
USE_ORIGINAL=1
[00069]
USE_ORIGINAL=1
[00011]
USE_ORIGINAL=1
[00006]
USE_ORIGINAL=1
[00003]
USE_ORIGINAL=1
AUDIO=1
PGS=
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=14419941
NSTART=27000000
NEND=27495495
NSIZE=14383104
FLINK=0
MLINK=0
[00002]
USE_ORIGINAL=1
[00004]
USE_ORIGINAL=1
[00012]
USE_ORIGINAL=1
[00014]
USE_ORIGINAL=1
[00013]
USE_ORIGINAL=1
[00057]
USE_ORIGINAL=1
AUDIO=1
PGS=
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=152693680
NSTART=27000000
NEND=31930550
NSIZE=152371200
FLINK=0
MLINK=0
[00015]
USE_ORIGINAL=1
[00061]
USE_ORIGINAL=1
AUDIO=111111111111
PGS=1111111111111111111111111111111
APULLDOWN=0
S1440=0
VIDEO2=0
V2MBRATE=0
M2TS_TARGET=29909872218
NSTART=27000000
NEND=315822909
NSIZE=27788673024
FLINK=0
MLINK=0

This is the subtitle from the non-procesed BD (demuxed using TSMuxer):
https://1drv.ms/u/s!AiCgDguh7E_OgZdr...abQuw?e=8dJRZt

This is the subtitle from the output BD created by BD-Rebuilder (demuxed using TSMuxer):
https://1drv.ms/u/s!AiCgDguh7E_OgZdq...-G2Nw?e=0AbAFy

[MrVideo]

Please "code" wrap the text, don't "quote" wrap it.

Thanks

[lauguru]

Hello, after a long time without hardly using computers, I would like to know what is the best configuration to convert full uhd with custom 48200mb, Nvenc codec to obtain the highest quality (vbr), ENCODE_QUALITY = 4 (ultra high extremly slow), what else could I add o remove?. Thanks

other question for update the new Nvenc codec 5.41https://github.com/rigaya/NVEnc/releases?page=1 in bd rebuilder copy and paste the files from https://github.com/rigaya/NVEnc/rele...cC_5.41_x64.7z and paste in path bdrebuilder /tools /nvenc an rename NVEncC64.exe to NVEncC.exe correct?

[Options]
[Options]
VERSION=0.61.0.25
ENCODER=1
MODE=0
ENCODE_QUALITY=4
AUTO_TWOPASSONLY=1
ONEPASS_ENCODING=2
B_PYRAMID=1
QUALITY_ULTRA=2
UHD_MAXRATE=60000
UHD_VBV_BUFFER=60000
AUTO_QUALITY=0
TARGET_SIZE=48200
AUDIO_TO_KEEP=all
SUBS_TO_KEEP=all
SD_CONVERT=0
OPEN_GOP=0
RESIZE_1080=0
RESIZE_1440=0
RESIZE_720=0
DEINTERLACE=1
SD_TO_1080=0
IGNORE_3D=0
CONVERT_WIDE=0
DTS_REENCODE=0
AC3_REENCODE=0
AC3_640=1
AC3_192=0
KEEP_HD_AUDIO=1
AUDIO_DRC=0
DECODER=0
AVCHD=1
REMOVE_WORKFILES=0
REMOVE_OUTPUT=0
USE_FILTERS=0
BDMV_CERT_ONLY=0
IVTC_PULLDOWN=0
ASSUME_DVD_PAL=0
FRIMSOURCE=0
COMPLETION_BEEP=0
OUTPUT_SBS=0
NEROAAC=0
SUPTITLE=0
PGSTOSRT=0
AUDIO_TRACK_LIMIT=0
SUBTITLE_TRACK_LIMIT=1
CUSTOM_TARGET_SIZE=48000
NVENC_CAPABLE=1
[Paths]
SOURCE_PATH=G:\
WORKING_PATH=E:

[RetsimLegin]

@jdobbs I encountered something entirely new yesterday.
I'm not going into where or how I got the source but the video is encoded at EXACTLY 24fps (not 23.976) - which I gather (from here https://forum.doom9.org/showthread.php?t=154533) IS a valid frame rate for BD-Video. The video does need re-encoding as it has letterboxed content and the black bars aren't in the source (i.e. it's not 1080 pixels high).
BDRB re-encoded the video at 23.976 an re-encoded the EC3 audio without other amendment (i.e. equivalent to 24fps) - meaning that the lip-sync drifted throughout and was was off by something like 1/2 second at the end.

So instead, I'm having to try avidemux to re-encode both whilst retaining the 24fps timing.

[jdobbs]

Originally Posted by RetsimLegin

@jdobbs I encountered something entirely new yesterday.
I'm not going into where or how I got the source but the video is encoded at EXACTLY 24fps (not 23.976) - which I gather (from here https://forum.doom9.org/showthread.php?t=154533) IS a valid frame rate for BD-Video. The video does need re-encoding as it has letterboxed content and the black bars aren't in the source (i.e. it's not 1080 pixels high).
BDRB re-encoded the video at 23.976 an re-encoded the EC3 audio without other amendment (i.e. equivalent to 24fps) - meaning that the lip-sync drifted throughout and was was off by something like 1/2 second at the end.

So instead, I'm having to try avidemux to re-encode both whilst retaining the 24fps timing.

When BD-RB converts rates, it should also adjust the audio. Can you look at the AVS for audio and see if it does?

[Mark_Venture]

not a bug, but a question... (should I be asking outside of this thread??)

When doing Alt-Movie Only for a normal Blurays, I had been selecting "MKV Container, 1920x1080, Intact Audio" . It works great and I'm happy with the output. Looking at Alternate.txt it has vFormat=5 (where 5=1920x1080). Does it actually resize the video on a normal bluray? I mean, a typical bluray is 1080p, so I would think it shouldn't, but I have to ask. Or does it cause black bars inserted or something to make the video a full 1080 lines for movies that aren't 16:9 aspect ratio or something?

When I do UHD disks, I've been using "MKV Container, HEVC, NO_RESIZE, Intact Audio" which has vFormat=7 (where 7=No Resizing)

Other than h264 vs H265, if I switch to "MKV Container, HEVC, NO_RESIZE, Intact Audio" for all, should I expect the same output for my regular blurays?

[RetsimLegin]

Originally Posted by jdobbs

Can you look at the AVS for audio and see if it does?

AVS? (sorry!)

Certainly
a) the BDRB output lost sync
b) the AVIDEMUX output (24p exactly) did not
c) ...and neither does the original

[MrVideo]

Originally Posted by jdobbs

When BD-RB converts rates, it should also adjust the audio. Can you look at the AVS for audio and see if it does?

That begs the question... why is BDRB converting 24fps to 23.976 in the first place?

[jdobbs]

Originally Posted by MrVideo

That begs the question... why is BDRB converting 24fps to 23.976 in the first place?

There was a good reason at the time I wrote it... but, to be honest, I can't remember why now.