BD Rebuilder Beta - Bug Reports Only - Page 1335

gonca · 8th November 2017, 23:16

DirectShow is 32 bit
x264 internal might be 64 bit, if memory is still good (watch it Lathe)
I notice a fps difference of some 10% between 32 and 64 bit on my system

Lathe · 9th November 2017, 01:03

Quote:

Originally Posted by gonca

DirectShow is 32 bit
x264 internal might be 64 bit, if memory is still good (watch it Lathe)
I notice a fps difference of some 10% between 32 and 64 bit on my system

Ahhhhh, yes, if DS is indeed 32 bit, that very well could be the difference.

Thanks gonca! I KNEW there must be some good reason why you were still here!

gonca · 9th November 2017, 01:14

Quote:

Originally Posted by Lathe

Thanks gonca! I KNEW there must be some good reason why you were still here!

So now we know my reason
What is yours, dear Lathe
P.S.
Like your doll avatar

Lathe · 9th November 2017, 01:47

Quote:

Originally Posted by gonca

So now we know my reason
What is yours, dear Lathe
P.S.
Like your doll avatar

JD specifically pays me to keep an eye on you...

... and the Avatar is Anime, but thanks...

AmigaFuture · 9th November 2017, 02:17

Heh, gonca got you and I think you missed it!

If JD pays you, then it's not a wonder he's talks about not making enough money, you extortionist! Butt (pun just for you Lathe), JD is a bit smarter than that. So, what's your next story?

Lathe · 9th November 2017, 03:09

Quote:

Originally Posted by AmigaFuture

Heh, gonca got you and I think you missed it!

If JD pays you, then it's not a wonder he's talks about not making enough money, you extortionist! Butt (pun just for you Lathe), JD is a bit smarter than that. So, what's your next story?

As usual, AF, you have run rings around my logic and I am at a total loss...

AmigaFuture · 9th November 2017, 04:04

Avatar....Doll....anime; from gonca. Sheesh.

frank_zappa1 · 9th November 2017, 19:08

thank so much this work with avisynth+ ?

AmigaFuture · 9th November 2017, 20:31

Quote:

Originally Posted by frank_zappa1

thank so much this work with avisynth+ ?

I think I understand your question. From the first post of this thread that that gives all the details:

1. Download and install AVISYNTH v2.57 or above -- it is free. If you are a DVD-RB user, it is compatible, so no worry. It is required for BD Rebuilder to work. AVISYNTH v2.60 can be downloaded from http://www.jdobbs.net/freeware/Avisynth_260.exe or from http://www.avisynth.org.

gonca · 9th November 2017, 22:32

Quote:

Originally Posted by frank_zappa1

thank so much this work with avisynth+ ?

No it does not

LowDead · 10th November 2017, 01:39

Quote:

Originally Posted by gonca

No it does not

hmm.. I'm using AviSynth+ it doesn't work with dvd-rb though, so had to install the old one for that..

//LD

frank_zappa1 · 10th November 2017, 17:26

Quote:

Originally Posted by LowDead

hmm.. I'm using AviSynth+ it doesn't work with dvd-rb though, so had to install the old one for that..

//LD

Why not AVS+ ???

Groucho2004 · 11th November 2017, 15:00

Quote:

Originally Posted by frank_zappa1

Who is supposed to read which rule?

Quote:

Originally Posted by frank_zappa1

Why not AVS+ ???

AVS+ behaves differently to the "classic" Avisynth in some scenarios and has additional dependencies. I think jdobbs simply wants to exclude another branch of potential bug reports that have nothing to do with his software.

gonca · 11th November 2017, 15:17

Quote:

Originally Posted by Groucho2004

Who is supposed to read which rule?

AVS+ behaves differently to the "classic" Avisynth in some scenarios and has additional dependencies. I think jdobbs simply wants to exclude another branch of potential bug reports that have nothing to do with his software.

All that he needs to do is switch between 32 bit AVS+ and AVS
Only takes a few seconds
Would be nice if BD_RB allowed AVS+, with no bug reports, but such is life

MrVideo · 11th November 2017, 20:50

Quote:

Originally Posted by gonca

Would be nice if BD_RB allowed AVS+, with no bug reports, but such is life

But, would using AVS+ add any value to BDRB? Does AVS provide all of the necessary tools to do what is needed? I believe the answers are no and yes. As pointed out, using AVS+ will more than likely only add the potential for bug reports that are not related to BDRB.

DoctorM · 11th November 2017, 21:41

Backing up Ladyhawke today (Warner Archive version). This is now the third WAC disc where BD Rebuilder does not recognize the trailer for re-encoding.
It is copied to the final disc untouched, but it does not appear on the stream list so it isn't re-encoded and tracks can't be blanked.

I always keep MIN_M2TS_SIZE & MIN_PLAYLIST_MINS at zero.
Yes I've tried: IGS_ENABLE=1

There is something weird with WAC discs, because I've never seen it happen to any other backups.

RoyGBiv-inRI · 12th November 2017, 00:14

How do I prevent BDRebuilder from recoding to make programming completely fill a BD-R? I have a bunch of TV shows I've recorded onto a DVD-recorder. I am then putting them on my computer HDD as MKV files (so I can change the AR which is set incorrectly by the DVD-recorder), and then I am importing 10 to 12 at a time to make one BD using Quick Play Backup. The files are about 1.7 Gb each so 10 should make a disc about 17 Gb. However, the process takes nearly 2 hours, and I end up with a BD that is 22.3 Gb in size.

I have added FORCE_NOENCODE=1 to my BDRebuilder.ini file. Is there something else I need to do to prevent it recoding? I don't think I care that it completely fills the BD. I just don't want a lot of recoding going on unnecessarily.

TIA.

SMK

Lathe · 12th November 2017, 00:25

Quote:

Originally Posted by RoyGBiv-inRI

How do I prevent BDRebuilder from recoding to make programming completely fill a BD-R? I have a bunch of TV shows I've recorded onto a DVD-recorder. I am then putting them on my computer HDD as MKV files (so I can change the AR which is set incorrectly by the DVD-recorder), and then I am importing 10 to 12 at a time to make one BD using Quick Play Backup. The files are about 1.7 Gb each so 10 should make a disc about 17 Gb. However, the process takes nearly 2 hours, and I end up with a BD that is 22.3 Gb in size.

I have added FORCE_NOENCODE=1 to my BDRebuilder.ini file. Is there something else I need to do to prevent it recoding? I don't think I care that it completely fills the BD. I just don't want a lot of recoding going on unnecessarily.

TIA.

SMK

I've found that in cases where size is not the issue (I'm talking about Blu-ray files, NOT my personal life, thank you...) usually, it is almost ALWAYS a case where the MKV files are simply not fully compliant with BD specifications. If BDRB notes that, a re-encode will always be done.

RoyGBiv-inRI · 12th November 2017, 16:01

Thanks. I'll search around to see if I can try some other options.

SMK

musiclover · 12th November 2017, 16:02

Quote:

Originally Posted by DoctorM

Backing up Ladyhawke today (Warner

I always keep MIN_M2TS_SIZE & MIN_PLAYLIST_MINS at zero.
Yes I've tried: IGS_ENABLE=1

What does IGS_ENABLE=1 do? I do not see it described in HIDDENOPTS.TXT

9th November 2017, 02:17	#26685 \| Link
AmigaFuture Registered User Join Date: Apr 2003 Location: Within the main Source. Posts: 895	Heh, gonca got you and I think you missed it! If JD pays you, then it's not a wonder he's talks about not making enough money, you extortionist! Butt (pun just for you Lathe), JD is a bit smarter than that. So, what's your next story? __________________ Life is not a journey to the grave; but rather to skid out broadside, thoroughly used, torn and warn and loudly proclaim; WOW; What a ride!!! Soon, I'm going to do it AGAiN in different skin!!

9th November 2017, 04:04	#26687 \| Link
AmigaFuture Registered User Join Date: Apr 2003 Location: Within the main Source. Posts: 895	Avatar....Doll....anime; from gonca. Sheesh. __________________ Life is not a journey to the grave; but rather to skid out broadside, thoroughly used, torn and warn and loudly proclaim; WOW; What a ride!!! Soon, I'm going to do it AGAiN in different skin!!

11th November 2017, 21:41	#26696 \| Link
DoctorM Registered User Join Date: Sep 2005 Posts: 550	Backing up Ladyhawke today (Warner Archive version). This is now the third WAC disc where BD Rebuilder does not recognize the trailer for re-encoding. It is copied to the final disc untouched, but it does not appear on the stream list so it isn't re-encoded and tracks can't be blanked. I always keep MIN_M2TS_SIZE & MIN_PLAYLIST_MINS at zero. Yes I've tried: IGS_ENABLE=1 There is something weird with WAC discs, because I've never seen it happen to any other backups. Last edited by DoctorM; 11th November 2017 at 22:07.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8th November 2017, 23:16	#26681 \| Link
gonca Registered User Join Date: Jul 2012 Posts: 1,180	DirectShow is 32 bit x264 internal might be 64 bit, if memory is still good (watch it Lathe) I notice a fps difference of some 10% between 32 and 64 bit on my system

9th November 2017, 19:08	#26688 \| Link
frank_zappa1 Registered User Join Date: Sep 2017 Posts: 26	thank so much this work with avisynth+ ?

12th November 2017, 00:14	#26697 \| Link
RoyGBiv-inRI Registered User Join Date: Jun 2011 Posts: 49	How do I prevent BDRebuilder from recoding to make programming completely fill a BD-R? I have a bunch of TV shows I've recorded onto a DVD-recorder. I am then putting them on my computer HDD as MKV files (so I can change the AR which is set incorrectly by the DVD-recorder), and then I am importing 10 to 12 at a time to make one BD using Quick Play Backup. The files are about 1.7 Gb each so 10 should make a disc about 17 Gb. However, the process takes nearly 2 hours, and I end up with a BD that is 22.3 Gb in size. I have added FORCE_NOENCODE=1 to my BDRebuilder.ini file. Is there something else I need to do to prevent it recoding? I don't think I care that it completely fills the BD. I just don't want a lot of recoding going on unnecessarily. TIA. SMK

12th November 2017, 16:01	#26699 \| Link
RoyGBiv-inRI Registered User Join Date: Jun 2011 Posts: 49	Thanks. I'll search around to see if I can try some other options. SMK